مقالات سال 2013

 | آخرین بروزرسانی: 1393/4/21 | 

 انتشار

  نویسنده

  عنوان مجله

  عنوان مقاله

  2013

  Ashrafizadeh,S.N

  Journal of Applied Polymer Science

  Identification of Otimum Synthesis Conditions for a Novel Anion Exchange Membrane by Response Surface Methodology

  2013

  Ashrafizadeh,S.N

  Industrial and Engineering Chemistry Research

  Optimization of Flow Parameters of Heavy Crude Oil-in-Water Emulsions through Pipelines

  2013

  Allahverdi, A

  Ceramics-silikaty

  Durability performance of RFCC spent catalyst-blended Portland cement paste exposed to sea water attack

  2013

  Allahverdi, A

  Powder Technology

  Mechanical activation of silicomanganese slag and its influence on the properties of Portland slag cement

  2013

  Jamshidi, M

  Iranian polymer journal

  Correlation between water permeability of latex-modified concrete (LMC) and water diffusion coefficient of latex film

  2013

  Jamshidi, M

  Journal of Industrial and Engineering Chemistry

  Relationship between the surface free energy of hardened cement paste and chemical phase composition

  2013

  Hejazi , P

  Journal of Molecular Catalysis B: Enzymatic

  Electrostatic Immobilization of Pectinase on Negatively Charged AOT-Fe3O4 Nanoparticles

  2013

  Dehghani, M. R

  Journal of Petroleum Science and Engineering

  Modeling of vaporization enthalpies of petroleum fractions and pure hydrocarbons using genetic programming,

  2014

  Dehghani, M. R

  Adsorption

  Modeling adsorption in binary associating solvents using the extended MPTA model

  2013

  Dehghani, M. R

  Iran. J. Chem. Chem. Eng

  Measurement and Modeling of Mean Ionic Activity Coefficient in Aqueous Solution Containing NaNO3

  2013

  Rahbar, A

  CHEMICAL ENGINEERING RESEARCH and DESIGN

  New predictive correlation for mass transfer coefficient in structured packed extraction columns

  2013

  Sh.Shahhosseini

  Chemical Engineerng research and design

  Optimal design of drainage channel geometry parameters in vane

  2013

  Sadeghi, M.T

  Combustion and Flame

  Chemical Structure of Autoignition in a Turbulent Lifted H2 /N2 Jet Flame Issuing into a Vitiated Coflow

  2013

  Sadeghi, M.T

  Scientia Iranica

  Optimization of OCM Reactions over Na-W-Mn/SiO2 Catalyst at Elevated Pressure using Artificial Neural Network and Response Surface Methodology

  2013

  Sadeghi, M.T

  Journal of Petroleum Science and Engineering

  The Optimization of Continuous Gas Lift Process Using an Integrated Compositional Model

  2013

  Alavi, S.M

  Reac Kinet Mech Cat

  Kinetic study of selective propane oxidation to acrylic acid over Mo1V0.3Te0.23Nb0.12Ox using the geneticalgorithm

  2013

  Feyzi ,F

  Journal of Chemical Physics

  A new perturbed-chain equation of state for square-well chains in fluid and solid phases

  2013

  Feyzi ,F

  Journal of Molecular Liquids

  Boyle temperature from SAFT, PC-SAFT and SAFT-VR equations of state

  2013

  Feyzi ,F

  Journal of Chemical Thermodynamics

  Equilibrium solubility of carbon dioxide in aqueous 2-((2-aminoethyl)amino)ethanol and N-methyldiethanolamine solution and modeling by electrolyte mPR-CPA EoS

  2013

  Feyzi ,F

  Iranian Journal of Chemistry and Chemical Engineering

  Measurement and Modeling of Mean Ionic Activity Coefficient in Aqueous Solution Containing NaNO3

  2013

  Ghaemi, A

  Desalination and Water Treatment

  Adsorption of cadmium (II) and nickel (II) on dolomite powder

  2013

  Mohammadi, T 

  Desalination and Water Treatment

  An investigation on manufacturing of alumina microfiltration membranes

  2013

  Mohammadi, T

  New Carbon Materials

  Defect formation and prevention during preparation of supported carbon membranes

  2013

  Mohammadi, T

  Chemical Engineering Research and Design

  Dehydration of ethylene glycol by pervaporation using gamma alumina/NaA zeolite composite membrane

  2013

  Mohammadi, T

  Journal of Membrane Science

  Effects of poly (allylamine hydrochloride) as a new functionalization agent for preparation of poly vinyl alcohol/multiwalled carbon nanotubes membranes

  2013

  Mohammadi, T

  Desalination and Water Treatment

  Evaluation of pervaporation condition and synthesis gels for NaA zeolite membranes

  2013

  Mohammadi, T

  Adsorption

  Fabrication and characterization of highly crystalline mordenite membranes on a-alumina disks via a seeded in situ template-free hydrothermal treatment

  2013

  Mohammadi, T

  Ceramics International

  Hydrothermal Synthesis of hydroxy sodalite zeolite membrane: separation of H2/CH4

  2013

  Mohammadi, T

  Applied Surface Science

  Investigation of H2S separation from H2S/CH4 mixtures using functionalized and non-functionalized vertically aligned carbon nano tube membranes

  2012

  Mohammadi, T

  Chemical Engineering Research and Design

  Modeling ultrafiltration of gelatin–water suspension by computational fluid dynamics

  2013

  Mohammadi, T

  Ceramics International

  Optimization of synthesis conditions for preparation of ceramic (A-type zeolite) membranes in dehydration of ethylene glycol

  2013

  Mohammadi, T

  POLYMER ENGINEERING AND SCIENCE

  Pervaporation study of ethylene glycol dehydration through (PVA–4A)/polypropylene mixed matrix composite membranes

  2013

  Mohammadi, T

  POLYMER ENGINEERING AND SCIENCE

  Transient Computational Fluid Dynamics Modeling of Pervaporation Separation of Aromatic/Aliphatic Hydrocarbon Mixtures Using Polymer Composite Membrane

  2013

  Mohammadi, T

  Chemical Engineering Research and Design

  Tubular Composite PVA Ceramic Supported Membrane for Bio-Ethanol Production

  2013

  Moghbeli, M. R

  Polymer-Plastics Technology and Engineering

  Fast and Convenient Synthesis of Cross-LinkedPoly(urethane-isocyanurate) in the Presence of Tetrabutylammonium Phthalimide-N-oxyl oretraethylammonium 2-(Carbamoyl)benzoate asEfficient Metal-free Cyclotrimerization Catalysts

  2013

  Naeempour, F 

  International Biodeterioration and Biodegradation

  Phenanthrene biodegradation by immobilized microbial consortium

  2013

  Hashemabadi , S

  Applied Rheology

  CFD Simulation of Wall Impingement of Tear Shape Viscoplastic Drops Utilizing OpenFOAM

  2013

  Hashemabadi

  International Journal of Mechanical Sciences

  Exact Solution and CFD Simulation of Magnetorheological Fluid Purely Tangential Flow within an Eccentric Annulus

  2013

  Hashemabadi

  Transport in Porous Media

  Extrudate Trilobe Catalysts and Loading Effects on Pressure Drop and Dynamic Liquid Holdup in Porous Media of Trickle Bed Reactors

  2013

  Hashemabadi

  Chemical Engineering Science

  Numerical Evaluation of the Gas-Liquid Interfacial Heat Transfer in the Trickle Flow Regime of Packed Beds at the Micro and Meso-Scale

  2013

  Hashemabadi

  Journal of Thermophysics and Heat Transfer

  Statistical analysis of nanofluid heat transfer in a heat exchange system

  2013

  Hashemabadi

  Energy Sources, Part A

  The Hydrodynamics of a Bubble Column Bioreactor with Oil-based Liquids: Experiments and CFD Simulation

  2013

  Ashrafizadeh,S.N

  Chemical Engineering and Technology

  3D Modeling and Simulation of Mass Transfer in Vapor Transport through Porous Membranes

  2013

  Ashrafizadeh,S.N

  International Journal of Applied Ceramic Technology

  Effect of Water Content of Synthetic Hydrogel on Dehydration Performance of Nanoporous LTA Zeolite Membranes

  2013

  Ashrafizadeh,S.N

  Industrial and Engineering Chemistry Research

  Optimization of Flow Parameters of Heavy Crude Oil-in-Water Emulsions through Pipelines

  2013

  Jamshidi, M

  journal of adhesion science and technology

  Adhesion of polypropylene fiber to cement matrix

  2013

  Jamshidi, M

  Materials in civil engineering

  Assessment of the Durability Performance of

  2013

  Jamshidi, M

  Journal of Industrial Textiles

  Application of low modulus polymeric fibers in engineered cementitious composites

  2013

  Jamshidi, M

  journal of Industrial textiles

  Investigation on polymeric fibers as reinforcement in cementitious composites: Flexural performance

  2013

  Jamshidi, M

  Journal of The Textile Institute

  Polymeric fibers pull-out behavior and microstructure as cementitious composites reinforcement

  2013

  Hejazi , P

  Construction and Building Materials

  Effective dispersion of nano-TiO2 powder for enhancement of photocatalytic properties in cement mixes

  2013

  Hejazi , P

  International Biodeterioration and Biodegradation

  Accelerated biodegradation of cured cement paste by Thiobacillus species under simulation condition

  2013

  Hejazi , P

  Journal of Molecular Catalysis B: Enzymatic

  Electrostatic Immobilization of Pectinase on Negatively Charged AOT-Fe3O4 Nanoparticles

  2013

  Dehghani, M. R

  Fluid phase equilibria

  Application of modified PHSC model in prediction of phase behavior of single and mixed electrolyte solutions

  2013

  Rahbar, A

  Journal of Molecular Liquids

  MD simulation and evaluation of the self-diffusion coefficients in aqueous NaCl solutions at different temperatures and concentrations

  2013

  Rowshanzamir, S

  Journal of Power Sources

  Preparation, characterization and cell performance of durable nafion/SiO2 hybrid membrane for high-temperature polymeric fuel cells

  2013

  Sh.Shahhosseini

  Oil and Gas Sciences and Technology

  Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut

  2013

  Sh.Shahhosseini

  Fuel Processing Technology

  Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst

  2013

  Sadeghi, M.T

  Combustion and Flame

  Chemical Structure of Autoignition in a Turbulent Lifted H2 /N2 Jet Flame Issuing into a Vitiated Coflow

  2013

  Sadeghi, M.T

  Scientia Iranica

  Optimization of OCM Reactions over Na-W-Mn/SiO2 Catalyst at Elevated Pressure using Artificial Neural Network and Response Surface Methodology

  2013

  Sadeghi, M.T

  Journal of Petroleum Science and Engineering

  The Optimization of Continuous Gas Lift Process Using an Integrated Compositional Model

  2013

  Sadeghi, M.T

  Oil and Gas Sciences and Technology

  Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut

  2013

  Sadeghi, M.T

  Fuel Processing Technology

  Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst

  2013

  Sadeghi, M.T

  Chemical Engineering and Technology

  Optimization of Fischer-Tropsch Process in a Fixed-Bed Reactor Using Non-uniform Catalysts

  2013

  Taeb

  Construction and Building Materials

  Effect of composition and length of PP and polyester fibres on mechanical

  2013

  Ghaemi, A

  Korean Journal of chemical engineering

  Characterization of Ag (I), Co (II) and Cu (II) removal process from aqueous solutions using Dolomite powder

  2013

  Mohammadi, T

  i n t e rna t i onal j o u r n a l o f hydrogen energy

  Gas permeation through H2-selective mixed matrix membranes: Experimental and neural network modeling

  2013

  Mohammadi, T

  New Carbon Materials

  Gas separation performance of carbon materials produced from phenolic resin: Effects of carbonization temperature and ozone post treatment

  2013

  Mohammadi, T

  Separation Science and Technology

  Effects of CNTs Content on Physicochemical and Pervaporation Separation Properties of PVA Membranes

  2013

  Mohammadi, T

  Powder Technology

  Investigations on hydrothermal synthesis parameters in preparation of nano particlesof LTA zeolite with the aid of TMAOH

  2013

  Mohammadi, T

  Journal of Membrane Science

  Modification of ideal MMMs permeation prediction models: Effects of partial pore blockage and polymer chain rigidification

  2013

  Mohammadi, T

  Industrial and Engineering Chemistry Research

  Preparation and oxygen permeation of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) perovskite-type membranes: experimental study and mathematical modeling

  2013

  Mohammadi, T

  International Journal of Photoenergy

  Synthesis of Nanostructured Anatase Mesoporous Membranes with Photocatalytic and Separation Capabilities for Water Ultrafiltration Process

  2013

  Moghbeli, M. R

  Polymer-Plastics Technology and Engineering

  Fast and Convenient Synthesis of Cross-LinkedPoly(urethane-isocyanurate) in the Presence of Tetrabutylammonium Phthalimide-N-oxyl oretraethylammonium 2-(Carbamoyl)benzoate asEfficient Metal-free Cyclotrimerization Catalysts

  2013

  Moghbeli, M. R

  Chemical Engineering Journal

  Ion-exchange polyHIPE type membrane for removing nitrate ions:Preparation, characterization, kinetics and adsorption studies

  2013

  Moghbeli, M. R

  Iranian Polymer Journal

  Application of genetic algorithm in calculation of the phase behavior of binary and ternary polymer solutions

  2013

  Moghbeli, M. R

  Journal of Applied Polymer Science

  Conducting Poly(styrene-co-divinylbenzene)/Polypyrrole PolyHIPEComposite Foam Prepared by Chemical Oxidative Polymerization

  2013

  Moghbeli, M. R

  Polymer Engineering and Science

  Rubber Modification of Unsaturated Polyester Resinwith Core–Shell Rubber Particles: Effect of Shell Composition

  2013

  Movahedirad, S

  chemical engineering and technology

  A Novel Model for Predicting the Dense Phase Behavior of 3D Gas-Solid Fluidized beds

  2013

  Hashemabadi, S

  Drying Technology

  Experimental Investigation and Modeling of Plug-Flow Fluidized Bed Drying Under Steady-State Conditions

  2013

  Hashemabadi

  International Communications in Heat and Mass Transfer

  Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle

  2013

  Hashemabadi

  Applied Thermal Engineering

  Experimental study of overall heat transfer coefficient in the application of dilute nanofluids in the car radiator

  2013

  Hashemabadi

  Transport in Porous Media

  Flow Maldistribution in Dense and Sock Loaded Trilobe Catalyst Trickle Bed Reactors: Experimental Data and Modeling Using Neural Network

  2013

  Hashemabadi

  Separation Science and Technology

  Numerical Analysis of Drops Coalescence and Breakage Effects on De-Oiling Hydrocyclone Performance, Separation Science and Technology

  2013

  Hashemabadi

  Chemical Engineering and Technology

  Numerical and Experimental Study of Catalyst Loading and body Effects on Gas-Liquid Trickle flow Bed

  2013

  Kasiri ,N

  Korean J. Chem. Eng

  Computational fluid dynamics simulation of multiphase flow in packed sieve tray of distillation column

  2013

  Rowshanzamir, S

  Journal of Power Sources

  Preparation, characterization and cell performance of durable nafion/SiO2 hybrid membrane for high-temperature polymeric fuel cells

  2013

  Sh.Shahhosseini

  Oil and Gas Sciences and Technology

  Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut

  2013

  Sh.Shahhosseini

  Fuel Processing Technology

  Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst

  2013

  Sadeghi, M.T

  Combustion and Flame

  Chemical Structure of Autoignition in a Turbulent Lifted H2 /N2 Jet Flame Issuing into a Vitiated Coflow

  2013

  Sadeghi, M.T

  Scientia Iranica

  Optimization of OCM Reactions over Na-W-Mn/SiO2 Catalyst at Elevated Pressure using Artificial Neural Network and Response Surface Methodology

  2013

  Sadeghi, M.T

  Journal of Petroleum Science and Engineering

  The Optimization of Continuous Gas Lift Process Using an Integrated Compositional Model

  2013

  Sadeghi, M.T

  Oil and Gas Sciences and Technology

  Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut

  2013

  Sadeghi, M.T

  Fuel Processing Technology

  Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst

  2013

  Sadeghi, M.T

  Chemical Engineering and Technology

  Optimization of Fischer-Tropsch Process in a Fixed-Bed Reactor Using Non-uniform Catalysts

  2013

  Taeb

  Construction and Building Materials

  Effect of composition and length of PP and polyester fibres on mechanical

  2013

  Ghaemi, A

  Korean Journal of chemical engineering

  Characterization of Ag (I), Co (II) and Cu (II) removal process from aqueous solutions using Dolomite powder

  2013

  Mohammadi, T

  i n t e rna t i onal j o u r n a l o f hydrogen energy

  Gas permeation through H2-selective mixed matrix membranes: Experimental and neural network modeling

  2013

  Mohammadi, T

  New Carbon Materials

  Gas separation performance of carbon materials produced from phenolic resin: Effects of carbonization temperature and ozone post treatment

  2013

  Mohammadi, T

  Separation Science and Technology

  Effects of CNTs Content on Physicochemical and Pervaporation Separation Properties of PVA Membranes

  2013

  Mohammadi, T

  Powder Technology

  Investigations on hydrothermal synthesis parameters in preparation of nano particlesof LTA zeolite with the aid of TMAOH

  2013

  Mohammadi, T

  Journal of Membrane Science

  Modification of ideal MMMs permeation prediction models: Effects of partial pore blockage and polymer chain rigidification

  2013

  Mohammadi, T

  Industrial and Engineering Chemistry Research

  Preparation and oxygen permeation of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) perovskite-type membranes: experimental study and mathematical modeling

  2013

  Mohammadi, T

  International Journal of Photoenergy

  Synthesis of Nanostructured Anatase Mesoporous Membranes with Photocatalytic and Separation Capabilities for Water Ultrafiltration Process

  2013

  Moghbeli, M. R

  Polymer-Plastics Technology and Engineering

  Fast and Convenient Synthesis of Cross-LinkedPoly(urethane-isocyanurate) in the Presence of Tetrabutylammonium Phthalimide-N-oxyl oretraethylammonium 2-(Carbamoyl)benzoate asEfficient Metal-free Cyclotrimerization Catalysts

  2013

  Moghbeli, M. R

  Chemical Engineering Journal

  Ion-exchange polyHIPE type membrane for removing nitrate ions:Preparation, characterization, kinetics and adsorption studies

  2013

  Moghbeli, M. R

  Iranian Polymer Journal

  Application of genetic algorithm in calculation of the phase behavior of binary and ternary polymer solutions

  2013

  Moghbeli, M. R

  Journal of Applied Polymer Science

  Conducting Poly(styrene-co-divinylbenzene)/Polypyrrole PolyHIPEComposite Foam Prepared by Chemical Oxidative Polymerization

  2013

  Moghbeli, M. R

  Polymer Engineering and Science

  Rubber Modification of Unsaturated Polyester Resinwith Core–Shell Rubber Particles: Effect of Shell Composition

  2013

  Movahedirad, S

  chemical engineering and technology

  A Novel Model for Predicting the Dense Phase Behavior of 3D Gas-Solid Fluidized beds

  2013

  Hashemabadi, S

  Drying Technology

  Experimental Investigation and Modeling of Plug-Flow Fluidized Bed Drying Under Steady-State Conditions

  2013

  Hashemabadi

  International Communications in Heat and Mass Transfer

  Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle

  2013

  Hashemabadi

  Transport in Porous Media

  Flow Maldistribution in Dense and Sock Loaded Trilobe Catalyst Trickle Bed Reactors: Experimental Data and Modeling Using Neural Network

  2013

  Hashemabadi

  Separation Science and Technology

  Numerical Analysis of Drops Coalescence and Breakage Effects on De-Oiling Hydrocyclone Performance, Separation Science and Technology

  2013

  Hashemabadi

  Chemical Engineering and Technology

  Numerical and Experimental Study of Catalyst Loading and body Effects on Gas-Liquid Trickle flow

  2013

  Kasiri ,N

  Korean J. Chem. Eng

  Computational fluid dynamics simulation of multiphase flow in packed sieve tray of distillation column


دفعات مشاهده: 4516 بار   |   دفعات چاپ: 975 بار   |   دفعات ارسال به دیگران: 9 بار   |   0 نظر