انتشار | نویسنده | عنوان مجله | عنوان مقاله |
2013 | Ashrafizadeh,S.N | Journal of Applied Polymer Science | Identification of Otimum Synthesis Conditions for a Novel Anion Exchange Membrane by Response Surface Methodology |
2013 | Ashrafizadeh,S.N | Industrial and Engineering Chemistry Research | Optimization of Flow Parameters of Heavy Crude Oil-in-Water Emulsions through Pipelines |
2013 | Allahverdi, A | Ceramics-silikaty | Durability performance of RFCC spent catalyst-blended Portland cement paste exposed to sea water attack |
2013 | Allahverdi, A | Powder Technology | Mechanical activation of silicomanganese slag and its influence on the properties of Portland slag cement |
2013 | Jamshidi, M | Iranian polymer journal | Correlation between water permeability of latex-modified concrete (LMC) and water diffusion coefficient of latex film |
2013 | Jamshidi, M | Journal of Industrial and Engineering Chemistry | Relationship between the surface free energy of hardened cement paste and chemical phase composition |
2013 | Hejazi , P | Journal of Molecular Catalysis B: Enzymatic | Electrostatic Immobilization of Pectinase on Negatively Charged AOT-Fe3O4 Nanoparticles |
2013 | Dehghani, M. R | Journal of Petroleum Science and Engineering | Modeling of vaporization enthalpies of petroleum fractions and pure hydrocarbons using genetic programming, |
2014 | Dehghani, M. R | Adsorption | Modeling adsorption in binary associating solvents using the extended MPTA model |
2013 | Dehghani, M. R | Iran. J. Chem. Chem. Eng | Measurement and Modeling of Mean Ionic Activity Coefficient in Aqueous Solution Containing NaNO3 |
2013 | Rahbar, A | CHEMICAL ENGINEERING RESEARCH and DESIGN | New predictive correlation for mass transfer coefficient in structured packed extraction columns |
2013 | Sh.Shahhosseini | Chemical Engineerng research and design | Optimal design of drainage channel geometry parameters in vane |
2013 | Sadeghi, M.T | Combustion and Flame | Chemical Structure of Autoignition in a Turbulent Lifted H2 /N2 Jet Flame Issuing into a Vitiated Coflow |
2013 | Sadeghi, M.T | Scientia Iranica | Optimization of OCM Reactions over Na-W-Mn/SiO2 Catalyst at Elevated Pressure using Artificial Neural Network and Response Surface Methodology |
2013 | Sadeghi, M.T | Journal of Petroleum Science and Engineering | The Optimization of Continuous Gas Lift Process Using an Integrated Compositional Model |
2013 | Alavi, S.M | Reac Kinet Mech Cat | Kinetic study of selective propane oxidation to acrylic acid over Mo1V0.3Te0.23Nb0.12Ox using the geneticalgorithm |
2013 | Feyzi ,F | Journal of Chemical Physics | A new perturbed-chain equation of state for square-well chains in fluid and solid phases |
2013 | Feyzi ,F | Journal of Molecular Liquids | Boyle temperature from SAFT, PC-SAFT and SAFT-VR equations of state |
2013 | Feyzi ,F | Journal of Chemical Thermodynamics | Equilibrium solubility of carbon dioxide in aqueous 2-((2-aminoethyl)amino)ethanol and N-methyldiethanolamine solution and modeling by electrolyte mPR-CPA EoS |
2013 | Feyzi ,F | Iranian Journal of Chemistry and Chemical Engineering | Measurement and Modeling of Mean Ionic Activity Coefficient in Aqueous Solution Containing NaNO3 |
2013 | Ghaemi, A | Desalination and Water Treatment | Adsorption of cadmium (II) and nickel (II) on dolomite powder |
2013 | Mohammadi, T | Desalination and Water Treatment | An investigation on manufacturing of alumina microfiltration membranes |
2013 | Mohammadi, T | New Carbon Materials | Defect formation and prevention during preparation of supported carbon membranes |
2013 | Mohammadi, T | Chemical Engineering Research and Design | Dehydration of ethylene glycol by pervaporation using gamma alumina/NaA zeolite composite membrane |
2013 | Mohammadi, T | Journal of Membrane Science | Effects of poly (allylamine hydrochloride) as a new functionalization agent for preparation of poly vinyl alcohol/multiwalled carbon nanotubes membranes |
2013 | Mohammadi, T | Desalination and Water Treatment | Evaluation of pervaporation condition and synthesis gels for NaA zeolite membranes |
2013 | Mohammadi, T | Adsorption | Fabrication and characterization of highly crystalline mordenite membranes on a-alumina disks via a seeded in situ template-free hydrothermal treatment |
2013 | Mohammadi, T | Ceramics International | Hydrothermal Synthesis of hydroxy sodalite zeolite membrane: separation of H2/CH4 |
2013 | Mohammadi, T | Applied Surface Science | Investigation of H2S separation from H2S/CH4 mixtures using functionalized and non-functionalized vertically aligned carbon nano tube membranes |
2012 | Mohammadi, T | Chemical Engineering Research and Design | Modeling ultrafiltration of gelatin–water suspension by computational fluid dynamics |
2013 | Mohammadi, T | Ceramics International | Optimization of synthesis conditions for preparation of ceramic (A-type zeolite) membranes in dehydration of ethylene glycol |
2013 | Mohammadi, T | POLYMER ENGINEERING AND SCIENCE | Pervaporation study of ethylene glycol dehydration through (PVA–4A)/polypropylene mixed matrix composite membranes |
2013 | Mohammadi, T | POLYMER ENGINEERING AND SCIENCE | Transient Computational Fluid Dynamics Modeling of Pervaporation Separation of Aromatic/Aliphatic Hydrocarbon Mixtures Using Polymer Composite Membrane |
2013 | Mohammadi, T | Chemical Engineering Research and Design | Tubular Composite PVA Ceramic Supported Membrane for Bio-Ethanol Production |
2013 | Moghbeli, M. R | Polymer-Plastics Technology and Engineering | Fast and Convenient Synthesis of Cross-LinkedPoly(urethane-isocyanurate) in the Presence of Tetrabutylammonium Phthalimide-N-oxyl oretraethylammonium 2-(Carbamoyl)benzoate asEfficient Metal-free Cyclotrimerization Catalysts |
2013 | Naeempour, F | International Biodeterioration and Biodegradation | Phenanthrene biodegradation by immobilized microbial consortium |
2013 | Hashemabadi , S | Applied Rheology | CFD Simulation of Wall Impingement of Tear Shape Viscoplastic Drops Utilizing OpenFOAM |
2013 | Hashemabadi | International Journal of Mechanical Sciences | Exact Solution and CFD Simulation of Magnetorheological Fluid Purely Tangential Flow within an Eccentric Annulus |
2013 | Hashemabadi | Transport in Porous Media | Extrudate Trilobe Catalysts and Loading Effects on Pressure Drop and Dynamic Liquid Holdup in Porous Media of Trickle Bed Reactors |
2013 | Hashemabadi | Chemical Engineering Science | Numerical Evaluation of the Gas-Liquid Interfacial Heat Transfer in the Trickle Flow Regime of Packed Beds at the Micro and Meso-Scale |
2013 | Hashemabadi | Journal of Thermophysics and Heat Transfer | Statistical analysis of nanofluid heat transfer in a heat exchange system |
2013 | Hashemabadi | Energy Sources, Part A | The Hydrodynamics of a Bubble Column Bioreactor with Oil-based Liquids: Experiments and CFD Simulation |
2013 | Ashrafizadeh,S.N | Chemical Engineering and Technology | 3D Modeling and Simulation of Mass Transfer in Vapor Transport through Porous Membranes |
2013 | Ashrafizadeh,S.N | International Journal of Applied Ceramic Technology | Effect of Water Content of Synthetic Hydrogel on Dehydration Performance of Nanoporous LTA Zeolite Membranes |
2013 | Ashrafizadeh,S.N | Industrial and Engineering Chemistry Research | Optimization of Flow Parameters of Heavy Crude Oil-in-Water Emulsions through Pipelines |
2013 | Jamshidi, M | journal of adhesion science and technology | Adhesion of polypropylene fiber to cement matrix |
2013 | Jamshidi, M | Materials in civil engineering | Assessment of the Durability Performance of |
2013 | Jamshidi, M | Journal of Industrial Textiles | Application of low modulus polymeric fibers in engineered cementitious composites |
2013 | Jamshidi, M | journal of Industrial textiles | Investigation on polymeric fibers as reinforcement in cementitious composites: Flexural performance |
2013 | Jamshidi, M | Journal of The Textile Institute | Polymeric fibers pull-out behavior and microstructure as cementitious composites reinforcement |
2013 | Hejazi , P | Construction and Building Materials | Effective dispersion of nano-TiO2 powder for enhancement of photocatalytic properties in cement mixes |
2013 | Hejazi , P | International Biodeterioration and Biodegradation | Accelerated biodegradation of cured cement paste by Thiobacillus species under simulation condition |
2013 | Hejazi , P | Journal of Molecular Catalysis B: Enzymatic | Electrostatic Immobilization of Pectinase on Negatively Charged AOT-Fe3O4 Nanoparticles |
2013 | Dehghani, M. R | Fluid phase equilibria | Application of modified PHSC model in prediction of phase behavior of single and mixed electrolyte solutions |
2013 | Rahbar, A | Journal of Molecular Liquids | MD simulation and evaluation of the self-diffusion coefficients in aqueous NaCl solutions at different temperatures and concentrations |
2013 | Rowshanzamir, S | Journal of Power Sources | Preparation, characterization and cell performance of durable nafion/SiO2 hybrid membrane for high-temperature polymeric fuel cells |
2013 | Sh.Shahhosseini | Oil and Gas Sciences and Technology | Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut |
2013 | Sh.Shahhosseini | Fuel Processing Technology | Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst |
2013 | Sadeghi, M.T | Combustion and Flame | Chemical Structure of Autoignition in a Turbulent Lifted H2 /N2 Jet Flame Issuing into a Vitiated Coflow |
2013 | Sadeghi, M.T | Scientia Iranica | Optimization of OCM Reactions over Na-W-Mn/SiO2 Catalyst at Elevated Pressure using Artificial Neural Network and Response Surface Methodology |
2013 | Sadeghi, M.T | Journal of Petroleum Science and Engineering | The Optimization of Continuous Gas Lift Process Using an Integrated Compositional Model |
2013 | Sadeghi, M.T | Oil and Gas Sciences and Technology | Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut |
2013 | Sadeghi, M.T | Fuel Processing Technology | Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst |
2013 | Sadeghi, M.T | Chemical Engineering and Technology | Optimization of Fischer-Tropsch Process in a Fixed-Bed Reactor Using Non-uniform Catalysts |
2013 | Taeb | Construction and Building Materials | Effect of composition and length of PP and polyester fibres on mechanical |
2013 | Ghaemi, A | Korean Journal of chemical engineering | Characterization of Ag (I), Co (II) and Cu (II) removal process from aqueous solutions using Dolomite powder |
2013 | Mohammadi, T | i n t e rna t i onal j o u r n a l o f hydrogen energy | Gas permeation through H2-selective mixed matrix membranes: Experimental and neural network modeling |
2013 | Mohammadi, T | New Carbon Materials | Gas separation performance of carbon materials produced from phenolic resin: Effects of carbonization temperature and ozone post treatment |
2013 | Mohammadi, T | Separation Science and Technology | Effects of CNTs Content on Physicochemical and Pervaporation Separation Properties of PVA Membranes |
2013 | Mohammadi, T | Powder Technology | Investigations on hydrothermal synthesis parameters in preparation of nano particlesof LTA zeolite with the aid of TMAOH |
2013 | Mohammadi, T | Journal of Membrane Science | Modification of ideal MMMs permeation prediction models: Effects of partial pore blockage and polymer chain rigidification |
2013 | Mohammadi, T | Industrial and Engineering Chemistry Research | Preparation and oxygen permeation of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) perovskite-type membranes: experimental study and mathematical modeling |
2013 | Mohammadi, T | International Journal of Photoenergy | Synthesis of Nanostructured Anatase Mesoporous Membranes with Photocatalytic and Separation Capabilities for Water Ultrafiltration Process |
2013 | Moghbeli, M. R | Polymer-Plastics Technology and Engineering | Fast and Convenient Synthesis of Cross-LinkedPoly(urethane-isocyanurate) in the Presence of Tetrabutylammonium Phthalimide-N-oxyl oretraethylammonium 2-(Carbamoyl)benzoate asEfficient Metal-free Cyclotrimerization Catalysts |
2013 | Moghbeli, M. R | Chemical Engineering Journal | Ion-exchange polyHIPE type membrane for removing nitrate ions:Preparation, characterization, kinetics and adsorption studies |
2013 | Moghbeli, M. R | Iranian Polymer Journal | Application of genetic algorithm in calculation of the phase behavior of binary and ternary polymer solutions |
2013 | Moghbeli, M. R | Journal of Applied Polymer Science | Conducting Poly(styrene-co-divinylbenzene)/Polypyrrole PolyHIPEComposite Foam Prepared by Chemical Oxidative Polymerization |
2013 | Moghbeli, M. R | Polymer Engineering and Science | Rubber Modification of Unsaturated Polyester Resinwith Core–Shell Rubber Particles: Effect of Shell Composition |
2013 | Movahedirad, S | chemical engineering and technology | A Novel Model for Predicting the Dense Phase Behavior of 3D Gas-Solid Fluidized beds |
2013 | Hashemabadi, S | Drying Technology | Experimental Investigation and Modeling of Plug-Flow Fluidized Bed Drying Under Steady-State Conditions |
2013 | Hashemabadi | International Communications in Heat and Mass Transfer | Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle |
2013 | Hashemabadi | Applied Thermal Engineering | Experimental study of overall heat transfer coefficient in the application of dilute nanofluids in the car radiator |
2013 | Hashemabadi | Transport in Porous Media | Flow Maldistribution in Dense and Sock Loaded Trilobe Catalyst Trickle Bed Reactors: Experimental Data and Modeling Using Neural Network |
2013 | Hashemabadi | Separation Science and Technology | Numerical Analysis of Drops Coalescence and Breakage Effects on De-Oiling Hydrocyclone Performance, Separation Science and Technology |
2013 | Hashemabadi | Chemical Engineering and Technology | Numerical and Experimental Study of Catalyst Loading and body Effects on Gas-Liquid Trickle flow Bed |
2013 | Kasiri ,N | Korean J. Chem. Eng | Computational fluid dynamics simulation of multiphase flow in packed sieve tray of distillation column |
2013 | Rowshanzamir, S | Journal of Power Sources | Preparation, characterization and cell performance of durable nafion/SiO2 hybrid membrane for high-temperature polymeric fuel cells |
2013 | Sh.Shahhosseini | Oil and Gas Sciences and Technology | Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut |
2013 | Sh.Shahhosseini | Fuel Processing Technology | Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst |
2013 | Sadeghi, M.T | Combustion and Flame | Chemical Structure of Autoignition in a Turbulent Lifted H2 /N2 Jet Flame Issuing into a Vitiated Coflow |
2013 | Sadeghi, M.T | Scientia Iranica | Optimization of OCM Reactions over Na-W-Mn/SiO2 Catalyst at Elevated Pressure using Artificial Neural Network and Response Surface Methodology |
2013 | Sadeghi, M.T | Journal of Petroleum Science and Engineering | The Optimization of Continuous Gas Lift Process Using an Integrated Compositional Model |
2013 | Sadeghi, M.T | Oil and Gas Sciences and Technology | Compositional Description of Three-phase Flow Model in a Gas-lifted Well with High Water-cut |
2013 | Sadeghi, M.T | Fuel Processing Technology | Micro-kineticmodeling of OCMreactions overMn/Na2WO4/SiO2 catalyst |
2013 | Sadeghi, M.T | Chemical Engineering and Technology | Optimization of Fischer-Tropsch Process in a Fixed-Bed Reactor Using Non-uniform Catalysts |
2013 | Taeb | Construction and Building Materials | Effect of composition and length of PP and polyester fibres on mechanical |
2013 | Ghaemi, A | Korean Journal of chemical engineering | Characterization of Ag (I), Co (II) and Cu (II) removal process from aqueous solutions using Dolomite powder |
2013 | Mohammadi, T | i n t e rna t i onal j o u r n a l o f hydrogen energy | Gas permeation through H2-selective mixed matrix membranes: Experimental and neural network modeling |
2013 | Mohammadi, T | New Carbon Materials | Gas separation performance of carbon materials produced from phenolic resin: Effects of carbonization temperature and ozone post treatment |
2013 | Mohammadi, T | Separation Science and Technology | Effects of CNTs Content on Physicochemical and Pervaporation Separation Properties of PVA Membranes |
2013 | Mohammadi, T | Powder Technology | Investigations on hydrothermal synthesis parameters in preparation of nano particlesof LTA zeolite with the aid of TMAOH |
2013 | Mohammadi, T | Journal of Membrane Science | Modification of ideal MMMs permeation prediction models: Effects of partial pore blockage and polymer chain rigidification |
2013 | Mohammadi, T | Industrial and Engineering Chemistry Research | Preparation and oxygen permeation of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) perovskite-type membranes: experimental study and mathematical modeling |
2013 | Mohammadi, T | International Journal of Photoenergy | Synthesis of Nanostructured Anatase Mesoporous Membranes with Photocatalytic and Separation Capabilities for Water Ultrafiltration Process |
2013 | Moghbeli, M. R | Polymer-Plastics Technology and Engineering | Fast and Convenient Synthesis of Cross-LinkedPoly(urethane-isocyanurate) in the Presence of Tetrabutylammonium Phthalimide-N-oxyl oretraethylammonium 2-(Carbamoyl)benzoate asEfficient Metal-free Cyclotrimerization Catalysts |
2013 | Moghbeli, M. R | Chemical Engineering Journal | Ion-exchange polyHIPE type membrane for removing nitrate ions:Preparation, characterization, kinetics and adsorption studies |
2013 | Moghbeli, M. R | Iranian Polymer Journal | Application of genetic algorithm in calculation of the phase behavior of binary and ternary polymer solutions |
2013 | Moghbeli, M. R | Journal of Applied Polymer Science | Conducting Poly(styrene-co-divinylbenzene)/Polypyrrole PolyHIPEComposite Foam Prepared by Chemical Oxidative Polymerization |
2013 | Moghbeli, M. R | Polymer Engineering and Science | Rubber Modification of Unsaturated Polyester Resinwith Core–Shell Rubber Particles: Effect of Shell Composition |
2013 | Movahedirad, S | chemical engineering and technology | A Novel Model for Predicting the Dense Phase Behavior of 3D Gas-Solid Fluidized beds |
2013 | Hashemabadi, S | Drying Technology | Experimental Investigation and Modeling of Plug-Flow Fluidized Bed Drying Under Steady-State Conditions |
2013 | Hashemabadi | International Communications in Heat and Mass Transfer | Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle |
2013 | Hashemabadi | Transport in Porous Media | Flow Maldistribution in Dense and Sock Loaded Trilobe Catalyst Trickle Bed Reactors: Experimental Data and Modeling Using Neural Network |
2013 | Hashemabadi | Separation Science and Technology | Numerical Analysis of Drops Coalescence and Breakage Effects on De-Oiling Hydrocyclone Performance, Separation Science and Technology |
2013 | Hashemabadi | Chemical Engineering and Technology | Numerical and Experimental Study of Catalyst Loading and body Effects on Gas-Liquid Trickle flow |
2013 | Kasiri ,N | Korean J. Chem. Eng | Computational fluid dynamics simulation of multiphase flow in packed sieve tray of distillation column |