|
Personal Details
NAME: Saeed
SURNAME: Shabestari
ACCADEMIC STATUS: Professor in IUST
Fields of Research Interests:
Solidification and Semi-Solid Processing,
Non-ferrous Alloys (Aluminum, Magnesium, and Copper Alloys),
Aluminum Matrix Composites, Nano-materials, Advanced Materials Processing
|
/shabestari.jpg)
|
|
Contact Address:
School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran
Tel: (9821)73228815 and (9821)77240371
Fax: +9821-77240371
E-mail: Shabestari iust.ac.ir
Google scholar: S.G. Shabestari
Education:
* Post doctorate in McGill University (1994-1995)
Field: Investigation on the Porosity Formation and Intermetallic Compounds in Aluminum Die-Casting Alloys.
* Ph.D. in Metallurgical Engineering, McGill University (1990-1994)
Topic: Formation of Iron-bearing Intermetallics in Aluminum-Silicon Casting Alloys
* M.Sc. in Metallurgical Engineering, Iran University of Science and Technology, 1989,
Topic: Optimization of Heat treatment Conditions of Electrical and Magnetic Fe-3.25%Si Steel in Controlled Atmosphere
* B.Eng. in Metallurgical Engineering, Iran University of Science and Technology, 1986
Honors:
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2015
* Distinguished Professor selected by Iranian Metallurgical and Materials Engineering Society and Iranian Foundrymen’s Society, 2014
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2012
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2010
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2007
* Best Paper Award of the 3rd international Conference of Internal Combustion Engines, Iran, January 2004
* Best Academic Researcher in School of Metallurgy and Materials Engineering, IUST University, 2000
* Best Paper Award of the International Congress of American Foundrymen Society (AFS), 1995, in the field of Aluminum Alloys
* Ph.D. in Metallurgical Engineering, McGill University, Degree: Excellent
* M.Sc. in Metallurgical Engineering, IUST University, Degree: Excellent
* B.Eng. in Metallurgical Engineering, IUST University, Degree: Excellent
Work Experience:
* Director of Department of Industrial Metallurgy, School of Metallurgy and Materials Engineering, IUST University, (March 2018- continued)
* Member of Publication Council of IUST university journals (2016 – 2018)
* Head of Center of Excellence for High Strength Alloys Technology (CEHSAT), Iran University of Science and Technology (IUST), 2012 - 2016.
* Deputy in Charge of Research, School of Metallurgy and Materials Engineering, 2008-2010
* Director of Department of Industrial Metallurgy, School of Metallurgy and Materials Engineering, 2006-2008
* Academic member of School of Metallurgy and Materials Engineering-Iran University of Science and Technology (IUST) since 1995
* Teaching undergraduate courses of Solidification Processing, Non-ferrous Alloys, Heat treatment about 24 years
* Teaching post-graduate courses of Advanced Solidification Processing, Advanced Analytical Characterization of Materials about 21 years
* Conducting more than 160 research projects including supervising of 19 Ph.D. theses, 72 M.Sc. and more than 62 B. Engineering theses
* Publishing more than 285 papers in the international and internal scientific journals
* 110 papers of them were published in the international refereed journals
International Collaborations:
* Editorial member of Journal of Thermal Analysis and Calorimetry, published by Springer
* Member of the Editorial Advisory Board of Journal of Advances in Materials and Processing Technologies (JAMPT), published by Taylor and Francis Publishers
* Editorial member of Iranian Journal of Materials Science and Engineering
* Editorial member of Founding Research Journal, Iranian Foundrymen’s Society
* Editorial member of the Journal of Technology of Education, Tehran, Iran,
* Editorial member of Rikhtegary, Journal of Iranian Foundrymen’s Society
* Reviewer of the International Journal of Materials Research, Germany
* Reviewer of the Journal of Materials Science and Engineering A, USA
* Reviewer of the Journal of Materials Science, USA
* Reviewer of the International Journal of Cast Metals Research, UK
* Reviewer of the Journal of Alloys and Compounds, Netherland
* Reviewer of the Journal of Metallurgical and Materials Transactions A, USA
* Reviewer of the Journal of Thermal Analysis and Calorimetry, Hungary
* Visiting professor in McGill Metals processing Centre (MMPC), McGill University, Montreal, Canada, 2005
* Visiting professor at Hahn-Meitner-Institut (HMI), Berlin, Germany, 2005
|
| Publications |
| Abbasi, M.H. , Shabestari, S.G. , Tavakoli, R., " On the glass-forming ability of (Zr0.5Cu0.5)100−xAlx ternary alloys: A molecular dynamics study", Materials Today Communicationsthis link is disabled, 2022, 31, 103474 |
| Shabestari, S.G. , Gholizadeh, A. , Naghdali, S., " Effect of Al-5Ti-1B and Zr grain refiners on the solidification characteristics and microstructure of Al-6Mg alloy studied through thermal analysis", Thermochimica Actathis link is disabled, 2022, 711, 179200 |
| Malekan, M. , Rashidi, R. , Shabestari, S.G. , Eckert, J., " Thermodynamic and kinetic interpretation of the glass-forming ability of Y-containing Cu-Zr-Al bulk metallic glasses", Journal of Non-Crystalline Solids, 2022, 576, 121266 |
| Ashkvary, S. , Shabestari, S.G. , Yavari, F., " Effect of Cooling Rate on the Microstructure and Solidification Characteristics of Al–20%Mg2Si In Situ Composites Using Computer-Aided Thermal Analysis Technique", International Journal of Metalcastingthis link is disabled, 2022 |
| Momeni, H. , Shabestari, S.G. , Razavi, S.H., " Densification and shape distortion of the Al-Cu-Mg pre-alloyed powder compact in supersolidus liquid phase sintering process", Iranian Journal of Materials Science and Engineering, 2021, 17(4), pp. 87–92 |
| Shabestari, S.G. , Ashkvary, S. , Yavari, F., " Assessment of the microstructure and solidification characteristics of al–20% mg2si composite under melt superheating treatment using thermal analysis", Iranian Journal of Materials Science and Engineering, 2021, 18(3) |
| Mohammadi, K. , Divandari, M. , Shabestari, S.G., " Investigation on the flow limitation during copper electroplating of polyurethane foam", Journal of Materials Research and Technology, 2021, 14, pp. 1532–1538 |
| ABDI, M. , SHABESTARI, S.G., " Novel high strength Al-10.5Si-3.4Cu-0.2Mg alloy produced through two-stage solution heat treatment", Transactions of Nonferrous Metals Society of China (English Edition), 2021, 31(3), pp. 576–585 |
| Shabestari, S.G. , Najafi, Y., " The Effect of Process Parameters on the Microstructure of Semi-solid Slurry of AZ91 Magnesium Alloy Produced Through Inert Gas Bubbling", Minerals, Metals and Materials Series, 2021, pp. 109–119 |
| H Momeni, S Shabestari, SH Razavi, "Densification and Shape Distortion of the Al-Cu-Mg Pre-alloyed Powder Compact in Supersolidus Liquid Phase Sintering Process", Iranian Journal of Materials Science and Engineering 17 (4), 87-92, 2020 |
| F Yavari, SG Shabestari, "Assessment of the Microstructure, Solidification Characteristics and Mechanical Properties of AZ61+ x Sr Magnesium Alloys", Metallurgical and Materials Transactions B 51 (6), 3089-3097, 2020 |
| M Hamdi, H Saghafian Larijani, SG Shabestari, N Rahbari, "The Wear Behavior of a Cast Al-20wt% Mg2Si Composite Thixoformed Via SIMA", Iranian Journal of Materials Science and Engineering 17 (3), 49-59, 2020 |
| H Saghafian, M Hamdi, SG Shabestari, N Rahbari, "The Wear Behavior of a Cast Al-20wt% Mg", Iranian Journal of Materials Science & Engineering 17 (3), 2020 |
| S Ashkevary, S Shabestari, "Investigation on the Effect of Melt Superheat on Solidification Behavior of in-situ Al-Mg2Si Composite using Cooling Curve Thermal Analysis", Founding Research Journal 4 (1), 1-9, 2020 |
| M Malekan, R Rashidi, SG Shabestari, "Mechanical properties and crystallization kinetics of Er-containing Cu–Zr–Al bulk metallic glasses with excellent glass forming ability", Vacuum 174, 109223, 2020 |
| Abdi, M., Shabestari, S.G., "Effect of gas-induced semisolid process on solidification parameters and dendrite coherency point of Al–4.3Cu alloy using thermal analysis", Journal of Thermal Analysis and Calorimetry,136(6), pp. 2211-2220, 2019 |
| Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Investigation on Equal-Channel Angular Pressing-Induced Grain Refinement in an Aluminum Matrix Composite Reinforced with Al-Cu-Ti Metallic Glass Particles", Journal of Materials Engineering and Performance, 28(5), pp. 3031-3040, 2019 |
| Yavari, F., Shabestari, S.G., "Assessment of the effect of cooling rate on dendrite coherency point and hot tearing susceptibility of AZ magnesium alloys using thermal analysis", International Journal of Cast Metals Research,32(2), pp. 85-94, 2019 |
| M. Abdi, S.G. Shabestari, “Semi-Solid Slurry Casting Using Gas Induced Semi-Solid Technique to Enhance the Microstructural Characteristics of Al-4.3Cu Alloy”, Solid State Phenomena, 2019, Vol. 285, PP. 253-258 |
| F. Yavari, S.G. Shabestari, “Assessment of the Effect of Cooling Rate on Dendrite Coherency Point and Hot Tearing Susceptibility of AZ Magnesium Alloys Using Thermal Analysis”, International Journal of Cast Metals Research, 2018, PP. 1-10 |
| M. Shakouri, M. Esmailian, S.G. Shabestari, “Effect of Silver Addition on Mechanical Properties and Stress Corrosion Cracking in a Pre-deformed and Overaged 7055 Aluminum Alloy”, Journal of Testing and Evaluation, ASTM, Sept. 2018, Vol. 46, No. 5, PP. 1891-1900 |
| Sedighi, O., Shabestari, S.G., Yavari, F., "Investigation on the effect of Sn on solidification and microstructure of AZ91 magnesium alloy using cooling curve thermal analysis", Thermochimica Acta, 667, pp. 165-172, 2018 |
| GHONCHEH, M.H., SHABESTARI, S.G., ASGARI, A., KARIMZADEH, M., "Nonmechanical criteria proposed for prediction of hot tearing sensitivity in 2024 aluminum alloy", Transactions of Nonferrous Metals Society of China (English Edition), 28(5), pp. 848-857, 2018 |
| Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation process on the interfacial characteristics of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Composite Interfaces, Volume 25, Issue 8, 3 August 2018, Pages 669-679 |
| Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Microstructural evaluation and mechanical properties of Al-CNT nanocomposites produced by different processing methods", Journal of Alloys and Compounds, Volume 723, 5 November 2017, Pages 633-641 |
| Ghoncheh, M.H. ,Shabestari, S.G., "Erratum to: Effect of Cooling Rate on the Dendrite Coherency Point During Solidification of Al2024 Alloy", Metallurgical and Materials Transactions A, (2015), 46, 3, (1287-1299), 10.1007/s11661-014-2697-z), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 48, Issue 10, 1 October 2017, Page 5165 |
| Shabestari, S.G., Divandari, M., Ghoncheh, M.H. ,Jamali, V., "Interplay among Coating Thickness, Strip Size, and Thermal and Solidification Characteristics in A356 Lost Foam Casting Alloy", Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Volume 48, Issue 5, 1 October 2017, Pages 2304-2315 |
| Saghafian, H., Shabestari, S.G., Ghadami, S., Ghoncheh, M.H., "Effects of Iron, Manganese, and Cooling Rate on Microstructure and Dry Sliding Wear Behavior of LM13 Aluminum Alloy", Tribology Transactions, Volume 60, Issue 5, 3 September 2017, Pages 888-901 |
| Rezaei, M.R., Shabestari, S.G., Razavi, S.H., "Effect of ECAP consolidation temperature on the microstructure and mechanical properties of Al-Cu-Ti metallic glass reinforced aluminum matrix composite", Journal of Materials Science and Technology, Volume 33, Issue 9, September 2017, Pages 1031-1038 |
| Momeni, H., Shabestari, S.G., Razavi, H., "Rheology of Al-Cu-Mg pre-alloyed powder in supersolidus liquid phase sintering process", Canadian Metallurgical Quarterly, 10 August 2017, Pages 1-8 |
| Yavari, F., Shabestari, S.G, "Effect of cooling rate and Al content on solidification characteristics of AZ magnesium alloys using cooling curve thermal analysis", Journal of Thermal Analysis and CalorimetryVolume 129, Issue 2, 1 August 2017, Pages 655-662 |
| Rikhtegar, F., Shabestari, S.G., Saghafian, H., "Synthesis of Carbon Nanotube-Reinforced Al2024 Matrix Nanocomposite Using Flake Powder Metallurgy Method", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 47, Issue 12, 1 December 2016, Pages 6428-6437 |
| Hayoune, A., Shabestari, S.G., Hamana, D., "Study on the Structural Evolution During Non Isothermal Aging of an Al–Cu–Mg–Si Alloy by Means of Thermal Analysis", Transactions of the Indian Institute of Metals, Volume 69, Issue 8, 1 October 2016, Pages 1529-1535 |
| Bidmeshki, C., Abouei, V., Saghafian, H., Shabestari, S.G., Noghani, M.T., "Effect of Mn addition on Fe-rich intermetallics morphology and dry sliding wear investigation of hypereutectic Al-17.5%Si alloys", Journal of Materials Research and Technology, Volume 5, Issue 3, 1 July 2016, Pages 250-258 |
| Hosseini, V.A., Shabestari, S.G., "Study on the eutectic and post-eutectic reactions in LM13 aluminum alloy using cooling curve thermal analysis technique", Journal of Thermal Analysis and Calorimetry, Volume 124, Issue 2, 1 May 2016, Pages 611-617 |
| Amne Elahi, M., Shabestari, S.G., "Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy",Transactions of Nonferrous Metals Society of China (English Edition), Volume 26, Issue 4, 1 April 2016, Pages 956-965 |
| Shabestari, S.G., Ghoncheh, M.H., "Investigation on the Effect of Cooling Rate on Hot Tearing Susceptibility of Al2024 Alloy Using Thermal Analysis",Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing ScienceVolume 46, Issue 6, 8 September 2015, Pages 2438-2448 |
| F. Rikhtegar, S.G. Shabestari, H. Saghafian, “The Homogenizingof Carbon Nanotube Dispersion in Aluminium Matrix Nanocomposite Using Flake PowderMetallurgy and Ball Milling Methods”, Powder Technology, 2015, Vol. 280, PP.26-34, (ISI Cited) |
| S.G. Shabestari, M.M. Tavakoli, M. Ghanbari, “Effect of Semi-Solid Processing onIron-bearing Intermetallic Compounds in A380 Aluminum Alloy”, Solid State Phenomena,Vols. 217-218, 2015, PP. 397-404, (ISI Cited) |
| S.G. Shabestari, H. Saghafian, F. Sahihi, M.H. Ghoncheh, “Investigationon the Microstructure of Al-25 wt-% Mg2Si Composite Produced by Slope Castingand Semi-solid Forming”, International Journal of Cast Metals Research, 2015, Vol.28, No. 3, PP. 158-166, (ISI Cited) |
| M.H. Ghoncheh, S.G. Shabestari, “Effect of Cooling Rate on the DendriteCoherency Point During Solidification of Al2024 Alloy”, Metallurgical andMaterials Transactions A, Volume 46, Issue 3, 2015, PP 1287-1299, (ISI Cited) |
| H. Saghafian, S.G. Shabestari, M.H. Ghoncheh, F. Sahihi, “Wear Behavior of Thixoformed Al-25 wt.%Mg2Si Composites Produced by Slope Casting Method”, Tribology Transactions, 2015,Vol. 58, PP. 288-299 (ISI Cited) |
| Hayoune, A., Shabestari, S.G., Hamana, D., "Study on the Structural Evolution During Non Isothermal Aging of an Al–Cu–Mg–Si Alloy by Means of Thermal Analysis", Transactions of the Indian Institute of Metals, 30 December 2015, Pages 1-7 |
| M.M. Tavakoli, S.G. Shabestari, M. Ghanbari, “Effect ofThixoforming on Morphological Changes in Iron-Bearing Intermetallics andMechanical Properties of Al-Si-Cu Alloys”, International Journal of MaterialsResearch, Vol.105, 2014, No. 12, PP. 1210-1217, (ISI Cited) |
| M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “Nanostructure andMechanical Properties of Bulk Al86Ni6Y6Ce2 Alloy Produced by Hot Consolidationof Amorphous Melt Spun Flakes”, Metallurgical and Materials Transaction A, Volume 45A, December 2014,PP. 6344-6351, (ISI Cited) |
| S.G. Shabestari, M.H. Ghoncheh, H. Momeni, "Evaluation of Formation of Intermetallic Compounds in Al2024Alloy Using Thermal Analysis Technique", Thermochimica Acta, 589, 2014,PP. 174-182, (ISI Cited) |
| M.H. Ghoncheh, S.G. Shabestari, M.H. Abbasi, “Effect of Cooling Rateon the Microstructure and Solidification Characteristics of Al2024 Alloy Using Computer-AidedThermal Analysis Technique”, Journal of Thermal Analysis and Calorimetry, 2014,Vol. 117, issue 3, PP. 1253-1261, (ISI Cited) |
| F. Rikhtegar, S.G.Shabestari, “Investigation on Solidification Conditions in Functionally Si-GradientAl Alloys Using Simulation and Cooling Curve Analysis Methods”, Journal of Thermal Analysis and Calorimetry, 2014, Vol.117, PP. 721-729,(ISI Cited) |
| M. Ghanbari, M. R. Aboutalebi, S. G. Shabestari, “Effect of SpiralDesign on Crystal Orientation During Single Crystal Growth”, Iranian Journal ofMaterials Science and Engineering, March 2014, Vol. 11, No. 1, PP. 48-55, (ISCCited) |
| M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “Nanocrystallizationand Mechanical Properties of Rapidly Solidified Amorphous Al86Ni6Y6Ce2 (at.%)Alloy”, Advanced Materials Research (AMR), Volume 829: Ultrafine Grained andNano-Structured Materials IV, 2014, PP. 20-24, (ISI Cited) |
| Z.S. Seyedraoufi, H. Saghafian,S.G. Shabestari, “Thermochemical Synthesis of Nanostructured Cu-Al2O3composite Powder”, Journal of Chemical Industry and Chemical EngineeringQuarterly, Vol. 20, Issue 3, 2014, PP. 339-344, (ISI Cited) |
| M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “NanostructureEvolution and Mechanical Properties of Rapidly Solidified Al-Ni-RE (Y, Ce)Alloys”, Materials Science and Engineering A, Vol. 586, 2013, PP. 407-412, (ISICited) |
| V.A. Hosseini, S.G. Shabestari, R.Gholizadeh, “Study on the Effect of Cooling Rate on the SolidificationParameters, Microstructure, and Mechanical Properties of LM13 Alloy Using CoolingCurve Thermal Analysis Technique”, Journal of Materials and Design, Vol. 50,September 2013, PP. 7–14 (ISI Cited) |
| S. Farahany, A. Ourdjini, M.H. Idrsi, S.G. Shabestari, “Evaluationof the Effect of Bi, Sb, Sr and Cooling Condition on Eutectic Phases in anAl-Si-Cu Alloy (ADC12) by In-situ Thermal Analysis”, Thermochimica Acta, 559,2013, PP. 59-68 (ISI Cited) |
| S. Farahany, A. Ourdjini, M.H. Idrsi, S.G. Shabestari, "Computer-aided Cooling Curve Thermal Analysis of Near Eutectic Al-Si-Cu-Fe Alloy:Effect of Silicon Modifier/Refiner and Solidification Conditions on the Nucleationand Growth of Dendrites", Journal of Thermal Analysis and Calorimetry,2013, Vol. 114, issue 2, PP. 705-717 (ISI Cited) |
| S.G. Shabestari, P. Ghaemmaghami, H. Saghafian, A. Osanlo,"Microstructural Evaluation of Semi-solid and Thixoformed Parts of LM28Aluminum Alloy", Solid State Phenomena, Vols. 192-193, 2013, PP. 136-141, (ISICited) |
| S.G. Shabestari, K.A.Nazari, " Growth Kinetics of Aluminum-Bearing Intermetallic Layer on ToolSteel", International Journal of Materials Research, Vol. 104, 2013, PP.351-357 (ISI Cited) |
| M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, " Nano-crystal development and thermal stability of amorphous Al–Ni–Y–Ce alloy ", Journal of Non-Crystalline Solids 09/2013; 375:7–12. · 1.60 Impact Factor |
|
M. Malekan, S.G. Shabestari, W. Zhang, S.H. Seyedein, R. Gholamipour, K. Yubuta, A. Makino, A. Inoue, "Formation of bulk metallic glass in situ nanocomposite in (Cu50Zr43Al7)99Si1 alloy", Materials Science and Engineering A, Vol. 553, 2012, PP. 10-13, (ISI Cited)
|
|
M.H. Shaeri, H. Saghafian, S.G. Shabestari, "Effect of Heat Treatment on Microstructure and Mechanical Properties of Cr- Mo Steels (FMU-226) Used in Mills Liner", Journal of Materials and Design, 34, 2012, PP. 192-200, (ISI Cited)
|
|
S.G. Shabestari, R. Gholizadeh, “Investigation on the Microstructure and Mechanical Properties of New Al-Si Piston Alloys”, Advanced Materials Research , Vol. 445, 2012, PP. 289-294, (ISI Cited)
|
|
S.G. Shabestari, K.A. Nazari, " Growth Kinetics of Aluminum-Bearing Intermetallic Layer on Tool Steel", International Journal of Materials Research (ISI Cited)
|
|
S. G. Shabestari, R. Gholizadeh, "Assessment of intermetallic compounds formation during solidification of Al-Si piston alloys through thermal analysis technique", Materials Science and Technology, (ISI Cited)
|
|
E. Parshizfard, S.G. Shabestari, "An Investigation on the Microstructural Evolution and Mechanical Properties of A380 Aluminum Alloy During SIMA Process", Journal of Alloys and Compounds, Volume 509, Issue 40, 2011, PP. 9654-9658, (ISI Cited)
|
|
M. Malekan, S.G. Shabestari, "Computer-Aided Cooling Curve Thermal Analysis Used to Predict the Quality of Aluminum Alloys", Journal of Thermal Analysis and Calorimetry, Vol. 103, No.2, 2011, PP.453-458 (ISI Cited)
|
|
B. Nami, S. G. Shabestari, S. M. Miresmaeili, H. Razavi, Sh. Mirdamadi, "The Effects of Calcium and Rare Earth Elements on the Microstructure and Creep Properties of AZ91 Alloy in As-cast and Semi-Solid Processed Conditions", International Journal of Cast Metals Research, Vol. 24, No.1, Feb. 2011, PP. 45-52 (ISI Cited)
|
|
B. Nami, S. G. Shabestari, H. Razavi, Sh. Mirdamadi, S. M. Miresmaeili, "Effect of Ca, RE Elements and Semi Solid Processing on the Microstructure and Creep Properties of AZ91 Alloy", Materials Science and Engineering A, Vol. 528, Issue 3, January 2011, PP. 1261-1267 (ISI Cited)
|
|
S.G. Shabestari, E. Parshizfard, "Effect of Semi-solid Forming on the Microstructure and Mechanical Properties of the Iron Containing Al-Si Alloys", Journal of Alloys and Compounds, Vol. 509, Issue 30, 2011, PP. 7973-7978, (ISI Cited)
|
|
H. Momeni, H. Razavi, S.G. Shabestari, "Effect of Supersolidus Liquid Phase Sintering on the Microstructure and Densification of the Al-Cu-Mg Pre-alloyed Powder", Iranian Journal of Materials Science and Engineering, Vol. 8, No. 2, Spring 2011, PP. 10-17 (ISC Cited)
|
|
H. Barati, M. R. Aboutalebi, S. G. Shabestari, S. H. Seyedein, "Investigation on Dendritic Solidification and Microsegregation in Presence of Melt Convection Using Phase Field Simulation", Canadian Metallurgical Quarterly, 2011, Vol. 50, No. 4, PP. 408-415, (ISI Cited)
|
|
B. Nami, H. Razavi, S. M. Miresmaeili, Sh. Mirdamadi, S. G. Shabestari, " Impression Creep Properties of a Semi-solid Processed Magnesium -Aluminum Alloy Containing Calcium and Rare Earth Elements", ScriptaMaterialia, Vol. 65, 2011, PP. 221-224, (ISI Cited)
|
|
R. Gholizadeh, S. G. Shabestari, "Investigation on the Effects of Ni, Fe, and Mn on the Formation of Complex Intermetallic Compounds in Al-Si-Cu-Mg-Ni alloys", Metallurgical and Materials Transacation A, Volume 42, Number 11 , 2011, PP. 3447-3458, (ISI Cited)
|
|
S.A. Vaziri, H.R. Shahverdi, S.G. Shabestari, K. Hazeli, M.J. Torkamany, "Effect of Re-scanning on Tribological Characterization of Laser Surface Alloyed Layers", Materials and Design,31 (2010) 3875-3879, (ISI Cited)
|
|
V. Abouei, H. Saghafian, S.G. Shabestari, M. Zarghami, "Effect of Fe-Rich Intermetallics on the Wear Beheaviour of Eutectic Al-Si Piston Alloy (LM13)", Materials and Design, 31 (2010) 3518-3524, (ISI Cited)
|
|
S.G. Shabestari and M. Malekan, "Assessment of the Effect of Grain Refinement on the Solidification Characteristics of 319 Aluminum Alloy Using Thermal Analysis", Journal of Alloys and Compounds, Vol. 492, 2010, PP. 134-142, (ISI Cited)
|
|
M. Divandari, S.G. Shabestari, V. Jamali, "Effect of Casting Section Thickness and Coating Thickness on the Fluidity of A356 Aluminum Alloy in Lost Foam Casting Process", International Journal of Cast Metals Research, Vol. 23, No. 1, 2010, PP. 23-29 (ISI Cited)
|
|
B. Nami, S. G. Shabestari, S. M. Miresmaeili, H. Razavi, Sh. Mirdamadi, "The Effect of Rare Earth Elements on the Kinetic of the Isothermal Coarsening of the Globular Solid Phase in Semisolid AZ91 Alloy Produced via SIMA Process" , Journal of Alloys and Compounds, Vol. 489, 2010, PP. 570-575, (ISI Cited)
|
| M.H. Shaeri, H. Saghafian, S.G. Shabestari, " Effect of Austempering and Martempering Processes on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", International Journal of Iron and Steel Research,17 (2010) 53. |
|
S.A. Vaziri, H.R. Shahverdi, S.G. Shabestari, M.J. Torkamany, "Effect of Beam Interaction Time on Laser Alloying with Pulsed Nd-YAG Laser", Materials Science Technology (MST), 25 (2009) 1234-1237.
|
|
S.A. Vaziri, H.R. Shahverdi, M.J. Torkamany, S.G. Shabestari, "Effect of Laser Parameters on Properties of Surface Alloyed Aluminum Substrate with Ni", Journal of Optics and Lasers in Engineering, Vol. 47, issue 9, September 2009, PP. 971-975 (ISI Cited)
|
| E. Taghaddos , M.M. Hejazi, R. Taghiabadi, S.G. Shabestari, " Effect of Iron Intermetallics on the Fluidity of 413 Aluminum Alloy", Journal of Alloys and Compounds, Vol. 468, 2009, PP. 539-549 |
|
K.A. Nazari, S.G. Shabestari, "Effect of Micro Alloying Elements on the Interfacial Reactions between Molten Aluminum Alloy and Tool Steel", Journal of Alloys and Compounds, Vol. 478, June 2009, PP. 523-530
|
|
M. Malekan and S.G. Shabestari, "Effect of Grain Refinement on Dendrite Coherency Point During Solidification of A319 Aluminum Alloy", Materials and Metallurgical Transacation A, Vol. 40A, Dec. 2009, PP. 3196-3203, (ISI Cited)
|
|
M. Malekan, S.G. Shabestari, R. Gholamipour, S.H. Seyedein, " Effect of Ge Addition on Mechanical Properties and Fracture Behavior of Cu-Zr-Al Bulk Metallic Glass", Journal of Alloys and Compounds, Vol. 484, 2009, PP. 708-711, (ISI Cited)
|
| S.G. Shabestari , M.M. Hejazi , M. Bahramifar , "Effect of Magnesium and Artificial Aging on the Microstructure and Mechanical Properties of Al-Si-Mn-Mg Alloys", Advances in Materials and Processing Technologies , Advanced Materials Research , Volumes 83 – 86, Dec. 2009, PP. 415-421 |
| S.G. Shabestari, M. Keshavarz, M.M. Hejazi, " Effect of Strontium on the Kinetics of Formation and Segregation of Intermatallic Compounds in A380 Aluminum Alloy", Journal of Alloys and Compounds, Vol. 477, May 2009, PP. 892-899 |
|
S.G. Shabestari, D. Li, M. Isac, R.I.L. Guthrie, "The Role of Solidification Conditions on the Microstructural Features of AA6111 Aluminum Strips Cast on a Horizontal Single Belt Caster", International Journal of Materials Research (formerly Z. Metallkunde), Vol. 99, December 2008, PP. 1384-1392
|
|
R. Taghiabadi, H.M. Ghasemi, S. G. Shabestari, "Effect of Iron-Rich Intermetallics on the Sliding Wear Behaviour of Al-Si Alloys", Material Science & Engineering, 2008
|
| H.A. Pour, M. Lieblich, A.J. Lopez, J. Rams, M.T. Salehi, S.G. Shabestari, "Assessment of Tensile Behaviour of an Al-Mg Alloy Composite Reinforced with NiAl and Oxidized NiAl Powder Particles Helped by Nano-Indentation", Journal of Composites A., Vol. 38, 2007, PP. 2536-2540 |
| F. Shahri, A. Beitollahi, S.G. Shabestari, S. kamali, "Effect of Heat Treatment on the Structure and Magnetic Properties of Al-Ge Addedd Fe73.5-xSi13.5B9Nb3Cu Alloys", Journal of Physical Review B, 76, 2007, 024434-1-13 |
|
F. Shahri, A. Beitollahi, S.G. Shabestari, 6 others, "Stuructural Characterization and Magnetoimpedeance Effect in Amorphous and Nanocrystalline Al-Ge Substituted FeSiBNbCu Ribbons", Journal of Magnetism and Magnetic Materials, Vol. 312, 2007, pp. 35-42
|
| O. Majidi, S.G. Shabestari, M.R. Aboutalebi, "Study of Fluxing Temperature in Molten Aluminum Refining Process", Journal of the Materials Processing Technology, 2007 |
|
S.G. Shabestari, S. Ghodrat, "Assessment of Modification and Formation of Intermetallic Compounds in Aluminum Alloy Using Thermal Analysis ", Mineral Science and Engineering, 2007
|
|
S.G. Shabestari, S. Ghodrat, "Thermal Analysis and Microstructural Evaluation of Intermetallic Compounds Formed During Pre-and Post-Utectic Reactions in 319 Aluminum Alloy", Canadian Metallurgical Quarterly, Vol. 45, No. 2, 2006, pp. 207-214
|
|
O. Majidi, S.G. Shabestari, M.R. Aboutalebi, "Study of Fluxing Temperature in Molten Aluminium Refining Process", Journal of Materials Processing Technology , 2006
|
|
S.G. Shabestari, N. Nanderka, W. Seeliger, Y. Banhart, "Optimisation of the Strength of Aluminium Foam Sandwich (AFS) Panels by Different Heat Treatment", Materials Science, Vol. 519-521, 2006, pp. 1221-1226
|
|
H.A. pour, M. lieblich, S.G. Shabestari, M.T. Salehi, "Influence of Pre-Oxidation of NiAl Intermetallic Particles on Thermal Stability of Al/NiAlP Composites at 500 ° C ", Scripta Materialia, Vol. 53, 2005, pp. 977-982
|
|
S.G. Shabestari, M. Malekan, "Thermal Analysis Study of the Effect of the Cooling Rate on the Microstructure and Solidification Parameters of 319 Aluminum Alloy", Canadian Metallurgical Quarterly, Vol. 3, 2005
|
| H.A. pour, M. lieblich, S.G. Shabestari, M.T. Salehi, "Influence of Pre-oxidation of NiAl Intermetallic Particles on Thermal Stability of Al/NiAlP Composites at 500 ° C ", Scripta Materialia, Vol. 53, 2005, pp. 977-982 |
| S.M. Miresmaeili, J. Campbell, S.G. Shabestari, S.M.A. Boutorabi, " Precipitation of Sr-Rich Intermetallic Particles and their Influence on Pore Formation in Sr-Modified A356 Alloy ", Metallurgical and Materials Transactions A, Vol. 36A, 2005, pp. 2341-2349 |
| S.G. Shabestari, P. Mokarian, S. Saeidinia,"Effect of Process Variables in Rotary Degassing of Aluminum", CIM Bulletin, Vol. 97, No. 1082, September 2004 |
|
S.G. Shabestari, F. Shahri, " Influence of Modification, Solidification Conditions and Heat Treatment on the Microstructure and Mechanical Properties of A356 aluminum alloy ", Journal of Material Science, Vol. 39, 2004, pp. 1-10
|
| S.G. Shabestari, H. Momeni, "Effect of Copper and Solidification Conditions on the Microstructure and Mechanical Properties of Al-Si-Mg Alloys", Journal of Materials Processing Technology, Vol. 153-154C, 2004, PP. 193-198 |
| S.G. Shabestari, "The Effect of Iron and Manganese in the Formation of Intermetallic Compounds in Aluminum-Silicon Alloys", Journal of Materials Science and Engineering A., Vol. 383, 2004, PP. 289-298 |
| S.M. Miresmaeili, S.G. Shabestari, S.M.A. Boutorabi, "Effect of Melt Filtration on Prosity Formation in Sr-Modified A356 Aluminum Alloy", International Journal of Cast Metals Research, Vol. 16,No. 6, 2003, PP.541-548 |
|
S. Shabestari, S.M. Miresmaeili, S.M.A. Boutorabi , " Effect of Sr-Modification and Melt Cleanliness on Melt Hydrogen Absorption of 319 Aluminium Alloy ", Journal of Material Science, 2003, pp. 1901-1907
|
| S.M. Miresmaeli , S. Shabestari, S.M.A. Boutorabi, " The effect of SR-Modification Treatment on Porosity Formation of Reduced Pressure 319 Aluminum Alloy Castings ", Canadian Metallurgical Quarterly, 2003 |
| Proceedings and International Conferences |
| M. Abdi, S.G. Shabestari, “Semi-Solid Slurry Casting Using Gas Induced Semi-Solid Technique to Enhance the Microstructural Characteristics of Al-4.3Cu Alloy”, the proceedings of 15th International Conference on Semi-Solid Processing of Alloys and Composites (S2P2018), October 22-24, 2018, Shenzhen, China |
| S.G. Shabestari, F. Rikhtegar, H. Saghafian, “The Effects of Processing Methods on Mechanical Properties of Al-CNT Nanocomposite Products”, 5th Annual International Conference on Materials Science, Metal and Manufacturing (M3 2018), 12-13 March 2018, Singapore |
| S.G. Shabestari,M. Abdi, “Effect of Magnesium and Solution Heat Treatment To Produce High Strength Al-10.5Si-3.4Cu Alloy”, InternationalConference on Advances in Materials andProcessing Technology, AMPT 2014, November 16-20, 2014, Dubai, UAE
|
| M.R. Rezaei, S.G. Shabestari, S.H. Razavi, “Grain Refinement and Formation of Ultrafine Grained Structure in a Metallic Glass Reinforced Aluminum Matrix Composite Through Equal Channel Angular Pressing (ECAP)”, The 6th Biennial International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM2017), 12-13 November 2017, Kish Island, Iran |
| M.R. Rezaei, S.H. Razavi, S.G. Shabestari, “Investigation on the Production of an Al matrix Composite Reinforced with Metallic Glass Particles Using Equal Channel Angular Pressing (ECAP)”, Proceedings of Iran International Aluminum Conference (IIAC2016), May 11-12, 2016, Tehran, Iran, PP. 53 |
| S.G. Shabestari, M. Abdi, “Effect of Magnesium and Solution Heat Treatment To Produce High Strength Al-10.5Si-3.4Cu Alloy”, International Conference on Advances in Materials and Processing Technology, AMPT 2014, November 16-20, 2014, Dubai, UAE |
| S.G. Shabestari ,M. Honarmand, H. Saghafian, “Microstructural Evolution of A380 AluminumAlloy Produced by Gas Induced Semi-Solid Technique (GISS)”, InternationalConference on Advances in Materials andProcessing Technology, AMPT 2014,November 16-20, 2014, Dubai, UAE |
| H. Gheisari,S.G. Shabestari, H. Saghafian, H. Momeni, M. Amne Elahi, “Investigation onTransient Liquid Phase Bonding in Al2024 Aluminium Alloy with Ga Interlayer”,Proceedings of Iran International Aluminum Conference (IIAC2014), May 25-26,2014, Tehran, I.R. Iran |
| M. Shakouri,M.Esmailian, S.G. Shabestari, A. Mottahedi, “Effect of Retrogression Time of RRA Heat treatment on Mechanical Properties of 7055 Aluminum Alloy”,Proceedings of Iran International Aluminum Conference (IIAC2014), May 25-26,2014, Tehran, I.R. Iran |
| M. Salehi, S.G. Shabestari, S.M.A. Boutorabi, “Nanocrystallization andMechanical Properties ofRapidly Solidified Amorphous Al86Ni6Y6Ce2 (at.%) Alloy”, InternationalBi-annual Conference on Ultrafine Grained and Nano-Structured Materials, UFGNSM2013, 5, 6 Nov. 2013, University of Tehran, Tehran, Iran |
| S.G.Shabestari, P. Ghaemmaghami, H. Saghafian, A. Osanlo, "MicrostructuralEvaluation of Semi-solid and Thixoformed Parts of LM28 Aluminum Alloy",12th International Conference on Semi-Solid Processing of Alloys andComposites, S2P2012, 8 - 11 October 2012, Cape Town, South Africa |
| M. Amne Elahi, H.Gheisari, S.G.Shabestari, "Effect of Deformation on the Microstructure andHardness of A356 Aluminum Alloy during SIMA Process", Proceedings of Iran International AluminumConference (IIAC2012), 15-16 May, 2012, Arak, Iran |
| S. Ghadami, S.G. Shabestari, H.Saghafian, V. Abouei, “The Effect of Manganese and Cooling Rate on theMicrostructure of Piston`s Alloy in the Excess Percentage of Iron”, Proceedings of Iran InternationalAluminum Conference (IIAC2012), 15-16 May, 2012, Arak, Iran
|
| P. Moinpour, S. H. Seyedein, S. G.Shabestari, H. Pakzad, A. Shekarian, M. Adeli, “A Numerical Study on the Effect of Air Gap on the Solidification ofA356 Alloy”, Proceedings ofIran International Aluminum Conference (IIAC2012), 15-16 May, 2012, Arak, Iran |
| S.G. Shabestari, R. Gholizadeh, “Investigation on the Microstructure and Mechanical Properties of New Al-Si Piston Alloys”, 14th International Conference on Advances in Materials and Processing Technologies, AMPT 2011, 13-16 July 2011, Istanbul, Turkey |
|
S.G. Shabestari, E. Parshizfard, F. Sahihi, "Effect of Semi-Solid Forming on the Microstructure and Mechanical Properties of the Iron Containing Al-Si Alloys", IMMC 2010, 15th International Metallurgy and Materials Congress, November 11-13, 2010, Istanbul, Turkey, PP. 1283-1292
|
|
H. Barati, M.R. Aboutalebi, S. Shabestari, S.H. Seyedein, "Phase Field Simulation of Dendritic Solidification of a Binary Alloy in Presence of Melt Convection", IMMC 2010, 15th International Metallurgy and Materials Congress, November 11-13, 2010, Istanbul, Turkey, PP. 278
|
|
S. Ketabchi, R. Mahmudi, S. Shabestari, "Impression creep behavior of AlSiCuMgNi piston alloys", the Proceedings of 12th International Conference on Aluminium Alloys (ICAA12), September 5-9, 2010, Yokohama, Japan, PP. 1573-1578
|
|
S.G. Shabestari, M. Ghanbari, "Effect of Plastic Deformation on Intermetallic Compounds and Semi-Solid Microstructure of Al-8Si-3Cu-4Fe-2Mn Alloy", The International Conference on Advances in Materials and Processings Technologies (AMPT) 2009, 26 - 29 October 2009, International Islamic University Malaysia, Kuala Lumpur, Malaysia
|
|
M. Malekan, S.G. Shabestari, "Computer-Aided Cooling Curve Thermal Analysis Used to Predict the Quality of Aluminum Alloys", The International Conference on Advances in Materials and Processings Technologies (AMPT) 2009, 26 - 29 October 2009, International Islamic University Malaysia, Kuala Lumpur, Malaysia
|
|
S.G. Shabestari, M.M. Hejazi, M. Bahramifar ,"Effect of Magnesium and Artificial Ageing on the Microstructure and Mechanical Properties of Al-Si-Mn-Mg Alloys", the Proceedings of International Conference on Advances in Materials and Processing Technology, AMPT 2008, 2-5 November, 2008, Manama, Bahrain
|
|
S. Mirzaei, A. Beitollahi, S.G. Shabestari, F. Shahri, "Effect of Heat treatment on the GMI Effect and Domain Structures of Amorfous and Nano Crystalline Soft Magnetic Fe72Si12.5B9Nb3 Cu1Al1.5Ge1 alloys ", 2nd International Congress on Nano Science and Nano Technology (ICNN 2008), 28-30 October 2008, University of Tabriz, Iran
|
|
Z. Seyedraoufi, H. Saghafian, S.G. Shabestari, "Synthesis of Cu-Al2O3 Nano Composite by Thermochemical Method", 2nd International Congress on Nano science and Nano Technology (ICNN 2008), 28-30 October 2008, University of Tabriz, Iran
|
|
S.G. Shabestari, M.M. Hejazi, " Combined Effects of Cooling Rate and Grain Refinement on the Microstructure and Hardness of Modified 319 Aluminum Alloy", Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes, MSE 2008, 1-4 September 2008, Nurenbuerg, Germany
|
|
M.H. Shaeri, S.G. Shabestari, H. Saghafian, "Effect of Austempering and Martempring Heat Treatment on the Amount of Retained Austenite in Cr-Mo Steels (FMU-226) Used in Mills Liner", Materials Science and Engineering Congress and Exhibition on Advanced Materials and Processes, MSE 2008, 1-4 September 2008, Nurenbuerg, Germany
|
|
R. Taghiabadi, H.M. Ghasemi, S.G. Shabestari, "Sliding Wear Behaviour of High Iron F332 Al-Si Alloy", The 3rd International Conference on Application of Traditional and High Performance Materials in Harsh Environments, 2008
|
|
A. Beitoollahi, F. Shahri, S.G. Shabestari, S. Kamali, "Effect of Heat-Treatment on the Structure and Magnetic Properties of Al-Ge-added FINEMENT Alloys", Knowledge Based Industries and Nano Technology Conference, 2007
|
|
H. Abdollahpour, S.G. Shabestari, M.T. Salehi, M. Lieblich, "Manufacturing and Mechanical Properties of Aluminum Matrix Composites Reinforced with NiAl Intermetallic Compound Produced by Hot-Extrusion", Tehran International Congress on Manufactring Engineering (TICME), 2007
|
|
D. Li, S.G. Shabestari, J. Kim, M. Isac, R.I.L. Gutherie, "Studies in the Costing of AA6111 Strip on a Horizontal, Single Belt, Strip Casting Simulator", Light Metals, 2005
|
|
F. Shahri, S.E. Roozmeh, S.M. Mohseni, A. Beitollahi, S.G. Shabestari, "Structural Magnetic Properties and MI Effect in Amorphous and Nano Crystalline AlGe-Substituted FeSiBNbCu Ribbons", 1st Iran-Russia, 2005
|
| S.G. Shabestari, M. Malekan, "Thermal Analysis Study of the Effect of Cooling Rate on the Microstructure and Solidification Parameters of 319 Aluminum Alloy", The Proceedings of Light Metals and Metal Matrix Composites 2004, International Conference of Metallurgists of Canada, CIM, COM 2004, 22-25 August, Hamilton, Canada, PP. 253-268 |
| S.G. Shabestrai, S. Ghodrat, "Thermal Analysis and Microstructural Evaluation of Intermetallic Compounds Formed During Pre- and Post-Eutectic Reactions in 319 Aluminum Alloy", The Proceedings of Light Metals and Metal Matrix Composites 2004, International Conference of Metallurgist of Canada, CIM, COM 2004, 22-25 August, Hamilton, Canada, P.P. 299-313 |
|
S.G. Shabestari, H. Moemeni, "Effect of Copper and Solidification Condition on the Microstructure and Mechanical Properties of Al-Si-Mg", International Advances in Materials and Processing Technology, Irland, 2003
|
|
|