[Home ]   [ فارسی ]  
Main Menu
Home::
About M. E at IUST::
People::
Academics::
Research::
Research Areas::
News::
Facilities Web::
::
Search in website

Advanced Search
..
Polling
How do you Evaluate this Site:
Excellent
Good
Average
   
..
Contact Information

AWT IMAGE

Addresses: School of Mechanical Engineering, Iran University of Science & Technology, Narmak, Tehran, Iran

Zip Code: 16846-13114

Mail Box: 16765-163

Tel : +98(21) 77491228-29

Fax : +98(21) 77240488

Email: meresearch@iust.ac.ir

..
:: Conferences ::

  Akhlaghi, Mohammad

  • Gas Turbine Power Augmentation By High Fogging. Proceeding Of Second International Conference On Applied Thermodynamics, Istanbul, Turkey – May 18-20 2005.
  • Investigation Of Compressor Inlet Air Cooling Effects On The Industrial Gas Turbines Performance, Using Thermo-Kinematics Modelling Of Injected Water Droplets. Presented To The 13th Annual International Conference Of Mechanical Engineering (Isme 2005).
  • Gas Turbine Power Augmentation By Inlet Fogging. The 13th Annual International Conference Of Mechanical Engineering (Isme 2005). Isfahan, Iran – May 17-19, 2005.
  • Effects Of A Vane-Recessed Tubular-Passage Passive Stall Control Technique On A Multistage, Low-Speed, Axial-Flow Compressor: Results Of Tests On The First Stage With The Rear Stages Removed, Proceeding Of Asme/ Igti, Usa, 2003
  • Throttling Nozzle Adaptive Stage For A 25 Mw Steam Turbine, Iranian Society Of Mechanical Engineers, 2nd Seminar, Shiraz, Iran, June, 1996.
  • Population Growth And Water Supply Problems In Tehran; The Capital Of Iran, Journal Of Iran Scientific And Industrial Research Organisation, No. 46, Tehran, Iran, March, 1991.

 

  Atefi, Gholamali

  • Khani,.Sina, Atefi. Gh, (2009)" A Cosserat Continuum Mechanical Approach to Pulsatile, Unsteady Blood Flow in a Tapered Femoral Artery" 3rd International Cnference on Mechanical Engineering and Mechanics, China, 21-23 October
  • Atefi. Gh , Khadem. Sh, (2008)" Analytical Solution Of Temperature Field In A Spherical Powder Particle Subjected To Gaussian Heat Flux" WCE2008 , london. U.K.2-4-July
  • Maddah. S, Atefi. Gh ,(2008)" Analysis Of Couette And Poiseuille Flows For Fourth –Grade Fluid And Oldroyd 6-Constant Fluids With The Perturbation Technique" ISME2008 , Kerman, Iran, 13-15 May
  • Atefi. Gh, Ganjeh Kaviri. A.S, Abdos. M.A, (2008)" 1D Temperature field in hallow sphere under fully periodic boundary conditions" ISME2008 , Kerman, Iran, 13-15 May
  • Maddah. S, Atefi. Gh , (2008)" Extension of second-grade non-local material theory based on classical continuum model and second-order local material theory based on Cosserat continuum model for analysis of blood flow through Artery" ISME2008 , Kerman, Iran, 13-15 May
  • Atefi. Gh , Zavar. M, (2008)" Analytical solution of inertial force effect on oil film of axial bearings" ISME2008 , Kerman, Iran, 13-15 May
  • Mohammadkhani. H, Atefi. Gh, Fardad.A.A, Jamil. M, (2008)" Optimization of position of wind turbine in a wind farm with genetic algorithm" National and environment fuel congress ,Iran, karaj,May
  • Atefi. Gh , (2007)" analysis of channel turbulent flow with application of micro polar models of fluid" ISME2007 ,Iran, May
  • Atefi. Gh , (2007)" a Analysis of channel turbulent flow with application of non-local continuum mechanics" ISME2007 ,Iran, May
  • Atefi. Gh , (2006)" Analytical Solution Of Turbulent Problems Using Governing Equation Of Cosserat Continuum Model " ASME , Chicago, November
  • Atefi. Gh , (2006)" Analytical Solution Of Turbulent Coquette Flow By Cosserat Continuum Model And Gradient Theory " ASME , Chicago, November
  • Atefi. Gh , (2006)" Analytical Solution Of Temperature Field In Hollow Sphere Under Periodic Boundary Condition " ISME2006 , Isfahan, Iran, May
  • Atefi. Gh , (2006)" Analysis of turbulent flow in channel with respect to second and third order fluid " ISME2006 , Isfahan, Iran, May
  • Atefi. Gh , (2006)" analysis of oil flo in a sliding bearing with study of inertial and viscous forces" 10 th conference of fluid dynamics , Yazd, Iran, November
  • Atefi. Gh , (2006)" Modifying material equation of third order rotary flow with respect of classical continuum model and linear irreversible thermodynamics" 10 th conference of fluid dynamics , Yazd, Iran, Novembe
  • Atefi, Gh., Shirmohammadi, R. & Sunden, B., "Temperature Distribution in a Hollow Sphere Subject to Arbitrary Dependent Boundary Conditions", Proc. of the 13th International Conference on Mechanical Engineering, Isfahan, Iran, 2005.
  • Atefi, Gh., & Moosaie, A., "Analysis of Blood Flow Through Arteries Using the Theory of Micropolar Fluids", Proc. of the 12th Iranian Biomedical Engineering Conference, Tabriz, Iran, November 2005.
  • Atefi, Gh. & Shirmohammadi, R., "Analytical Solution of One-Dimensional Temperature Field in Hollow Cylinder with Periodic Boundary Condition Using Fourier Expansion", Proc. of the Int. Conf. on Recent Advances in Mechanical & Materials Engineering, Malay
  • Moosaie, A. & Atefi, Gh., "Analytical Solution to Slow Flow of a Cosserat Fluid Past a Sphere Using Slip Boundary Condition", Proc. of the 3rd WSEAS/IASME Int. Conf. on Fluid Mechanics and Aerodynamics, Corfu, Greece, August 2005.
  • Moosaie, A. & Atefi, Gh., "An Analytical Approach to Turbulent Flow Through Smooth Pipes", Proc. of the 3rd WSEAS/IASME Int. Conf. on Fluid Mechanics and Aerodynamics, Corfu, Greece, August 2005.
  • Atefi, Gh. & Moosaie, A., "Solution to d’Alembert’s Paradox in Hydrodynamics Using Cosserat Continuum Model", Proc. of the 13th Annual International Conference on Mechanical Engineering, Isfahan, Iran, May 2005.
  • Atefi, Gh. & Shirmohammadi, R., "Analytical Solution to Temperature Field in a Solid Sphere under Time-Varying Boundary Condition", Proc. of the 4th International Conference on Aerospace Engineering, Tehran, Iran, 2002.
  • Atefi, Gh. & Moosaie, A., "Analytical Solution to Turbulent Couette Flow Using Cosserat Continuum Model", Proc. of the 13th Annual International Conference on Mechanical Engineering, Isfahan, Iran, May 2005.
  • Atefi, Gh. & Meigoonpoori, M. R., "The Effect of Slip Theory on Characteristics of Flow around a Sphere", Proc. of the 10th International Conference on Mechanical Engineering, Tehran, Iran, 2002.
  • Astiri, H. A., Atefi, Gh. & Meigoonpoori, M. R., "Numerical Analysis of Effect of Slip Boundary Condition on Mass Concentration Contours", Proc. of the 9th International Conference on Mechanical Engineering, Rasht, Iran, 2001.
  • Atefi, Gh., Meigoonpoori, M. R. & Astiri, H. A., "Analytical Investigation of Effect of Trostel Number on Inflection Point of Velocity Profiles", Proc. of the 9th International Conference on Mechanical Engineering, Rasht, Iran, 2001.
  • Astiri, H. A., Atefi, Gh. & Meigoonpoori, M. R., "Trostel Number and its Effect on Mass Transfer Parameters", Proc. of the 9th International Conference on Mechanical Engineering, Rasht, Iran, 2001.
  • Atefi, Gh. & Meigoonpoori, M. R., "Numerical Investigation of Simultaneous Effect of Reynolds and Trostel Numbers on Streamlines around a Cylinder at Moderate Reynolds Numbers", Proc. of the 9th International Conference on Mechanical Engineering, Rasht, I
  • Atefi, Gh. & Meigoonpoori, M. R., "Numerical Investigation of Fluid Flow around a Sphere with Slip Boundary Condition at Moderate Reynolds Numbers", Proc. of the 1st International Conference on Aerospace Engineering, Tehran, Iran, 2000.
  • Atefi, Gh. & Meigoonpoori, M. R. & Astiri, H. A., "Numerical Solution to Fluid Flow around a Cylinder with Slip Boundary Condition at Moderate Reynolds Numbers", Proc. of the 1st International Conference on Aerospace Engineering, Tehran, Iran, 2000.
  • Atefi, Gh. & Gorji, M. S., "Temperature Field in Finite Cylinder under Inhomogeneous-Periodic and Exponential Boundary Condition and Representation of its Airy Stress Function", Proc. of the 2nd International Conference on Applied Mathematics, Tehran, Ir
  • Oseen’s Boundary-Value Problem of the Navier-Stokes Equations", Proc. of the 2nd International Conference on Applied Mathematics, Tehran, Iran, 2000.
  • Atefi, Gh., Fardad, A. A. & Namakian, M., "Temperature Field on Cross-Section of Turbine Blade Using Analogy and Numerical Methods", Proc. of the 6th Annual International Conference on Mechanical Engineering, Tehran, Iran, 1998.
  • Atefi, Gh. & Movahhed, M., "Numerical Solution to Flow Past a Sphere with Slip Boundary Condition at Moderate Reynolds Numbers", Proc. of the 6th Annual International Conference on Mechanical Engineering, Tehran, Iran, 1998.
  • Atefi, Gh. & Bandeh, M., "The Evolution of Material Constitutive Equation of a Second-Grade Fluid Based on the Classical Continuum Model", Proc. of the 6th Annual International Conference on Mechanical Engineering, Tehran, Iran, 1998.
  • Atefi, Gh. & Bandeh, M., "Investigation of Replacement of non-Freon Refrigerants in Refrigeration Cycles and its Effect on Emvironment", Proc. of the 1st Iranian National Conference on Energy, Tehran, Iran, 1997.

 

 

  Ayatollahi, Majidreza

  • Aliha M.R.M. And Ayatollahi M.R. (2007) "Combined Mode Fracture Toughness Assessment For A High Strength Cement Mortar" Proceedings Of Damas Conference, Turin, Italy.
  • Ayatollahi M.R., Azad H. And Hashemi R. (2007) "Analysis Of Cracked Pipes Reinforced By Composite Patching" First Iranian Pipe And Pipeline Conference, Tehran, Iran.
  • Akbardoost J., Ayatollahi M.R. And Aliha M.R.M. (2007) "Strength Evaluation Of Oil And Gas Pipes Under External Explosive Loading" First Iranian Pipe And Pipeline Conference, Tehran, Iran.
  • Aliha M.R.M. And Ayatollahi M.R. (2007) "A Fracture Mechanics Approach For Analyzing Spiral Weld Pipes Containing Crack" First Iranian Pipe And Pipeline Conference, Tehran, Iran.
  • Ayatollahi M.R. And Khorramishad H. (2007) "Stress Intensity Factors For Cracked Buried Pipes - 3d Finite Element Analysis" Proceedings Of 15th Annual International Conference On Mechanical Engineering, Tehran, Iran.
  • Ayatollahi M.R. Aliha M.R.M. And Khademi S. (2007) "On Determination Of Tensile Strength Of Rock Materials Using Disk-Type Specimens" Proceedings Of 15th Annual International Conference On Mechanical Engineering, Tehran, Iran.
  • Ayatollahi M.R. And Khorramishad H. (2007) "Two-Dimensional Analysis Of Cracks In Buried Oil And Gas Pipes" Proceedings Of Third National Conference On Civil Engineering, Tabriz, Iran.
  • Ayatollahi M.R. And Saravani M. (2007) "Finite Element Analysis Of Cracks Existing In Root Of A V-Notch" Proceedings Of Third National Conference On Civil Engineering, Tabriz, Iran.
  • Aliha M.R.M., Ayatollahi M.R. And Ashtari R. (2007) "Experimental Investigation Of Brittle Fracture In A Cracked Marble Specimen" Proceedings Of Third National Conference On Civil Engineering, Tabriz, Iran.
  • Ayatollahi M.R. And Tiznobeik H. (2007) "A Review Of Numerical Techniques Used For Photoelastic Analysis Of Cracks", Proceeding Of 6th Conference Of Iranian Aerospace Society, Tehran, Iran.
  • Ayatollahi M.R. And Saravani M. (2007) "Experimental Determination Of Stress Intensity Factors In Cracked V-Notches Using Photoelasticity", Proceeding Of 6th Conference Of Iranian Aerospace Society, Tehran, Iran.
  • Ayatollahi M.R., Rokhy H. And Hashemi R. (2007) "Free Vibration Analysis Of A Cracked Timoshenko Beam" Proceeding Of 6th Conference Of Iranian Aerospace Society, Tehran, Iran.
  • Ayatollahi M.R. A., Shakeri And M. Zakeri (2006) "A Fracture Criterion For Strength Analysis Of Cracked Drills Under Drilling Torsional Moments" Proceedings Of The First Iranian Petroleum Engineering Congress, Tehran, Iran.
  • Ayatollahi M.R., Aliha M.R.M. And Takaffoli, M. (2006) "Application Of Fracture Mechanics For Determination Of In-Situ Stresses During Hydraulic Fracturing Process" Proceedings Of The First Iranian Petroleum Engineering Congress, Tehran, Iran.
  • Aliha M.R.M. And Ayatollahi M.R. (2006) "A Theoretical Investigation Of Hydraulic Fracturing In Horizontal Wells Using Fracture Mechanics Approach" Proceedings Of The First Iranian Petroleum Engineering Congress, Tehran Iran.
  • Ayatollahi, M.R. And Mostafavi, M. (2006) “Mode I Preloading – Mode Ii Fracture In Warm Prestressing” Proceedings Of The 16th European Conference On Fracture- Ecf16, Alexandroupolis, Greece.
  • Ayatollahi, M.R. And Aliha, M.R.M. (2006) “Predictions Of Mixed Mode Fracture Toughness For A Soft Rock” Proceedings Of The 16th European Conference On Fracture- Ecf16, Alexandroupolis, Greece.
  • Ayatollahi, M.R. And Mostafavi, M. (2006) ”Warm Pre-Stressing Effects On Mechanism Of Fracture In A Central Angled Crack Specimen” Proceedings Of The 10th International Isme Conference, Isfahan, Iran.
  • Ayatollahi, M.R., Aliha, M.R.M And Poursaeedi, E (2006) ”Failure Evaluation Of A Fractured Turbine Shaft In A Gas Power Plant Using Finite Element Analysis” Proceedings Of The 10th International Isme Conference, Isfahan, Iran.
  • Ayatollahi, M.R. And Hashemi, R. (2006) “Mixed Mode Brittle Fracture In Cracked Components Reinforced By Composite Patching” Proceedings Of 7th Icce International Conference, Tehran, Iran. (In Persian)
  • Ayatollahi, M.R. And Hashemi, R. (2006) “Optimized Fiber Angle For Composite Reinforcement Of A Crack On A Rivet Hole” Proceedings Of 7th Icce International Conference, Tehran, Iran. (In Persian)
  • Ayatollahi, M.R. And Takaffoli, M. (2006) “Finite Element Modeling For Hydraulic Fracturing In Oil And Gas Wells” Proceedings Of 7th Icce International Conference, Tehran, Iran. (In Persian)
  • Ayatollahi, M.R. And Hassani, M.M. (2005) “Fracture Initiation Angle For A Cracked Plate Under Pure Shear” Proceedings Of 2nd National Conference On Thin-Walled Structures, Kerman, Iran, Pp. 301-310. (In Persian)
  • Ayatollahi, M.R. And Hashemi, R. “Effects Of Composite Reinforcement On A Thin-Walled Plate Containing A Central Crack” Proceedings Of 2nd National Conference On Thin-Walled Structures, Kerman, Iran, Pp. 293-300. (In Persian)
  • Ayatollahi, M.R. And Aliniaziazi, A. (2005) “Finite Element Analysis Of A Warm Pre-Stressed Center Crack Plate” Proceedings Of 2nd National Conference On Civil Engineering, Tehran, Iran. (In Persian)
  • Ayatollahi, M.R. And Raghebi, M. (2005) “In-Plane Vibrations Of Curved Timoshenko Beams Using Finite Element Method” Proceedings Of 2nd National Conference On Civil Engineering, Tehran, Iran. (In Persian)
  • Ayatollahi, M.R. And Hassani, M.M. (2005) “Path Of Crack Growth In A Crack Specimen Subjected To Pure Mode Ii” Proceedings Of 2nd National Conference On Civil Engineering, Tehran, Iran. (In Persian)
  • Ayatollahi, M.R. And Ashtari, R. (2005) ”Statistical Analysis Of Fracture Toughness Results For Two Concrete Materials Using Weibull’s Model” Proceedings Of The 9th International Isme Conference, Isfahan, Iran. (In Persian)
  • Ayatollahi, M.R. Zakeri, M. (2005) ”Evaluation Of Iso-Chromatic Fringes Around Mode Ii Cracks Using Theory Of Photoelasticity” Proceedings Of The 9th International Isme Conference, Isfahan, Iran. (In Persian)
  • Ayatollahi, M.R. Mostafavi, M. (2005) ”Effects Of Preloading Level On A Warm Pre-Stressed Crack Specimen” Proceedings Of The 9th International Isme Conference, Isfahan, Iran
  • Ayatollahi, M.R., Aliniaziazi, A. And Mostafavi, M. (2005) “Warm Pre-Stress Effects On Cleavage Fracture In Center Crack Specimen” Proceedings Of The 11th International Conference On Fracture- Icf11, Turin, Italy.
  • Ayatollahi, M.R. Zakeri, M. And Hassani, M.M. (2005) “On The Presence Of T-Stress In Mode Ii Crack Problems” Proceedings Of The 11th International Conference On Fracture- Icf11, Turin, Italy.
  • Ayatollahi, M.R., And Aliha, M.R.M. (2005) “Applications Of Fracture Mechanics In Rock Cutting Processes In Drilling Operation” Iranian Drilling Conference, Arak, Iran. (In Persian)
  • Ayatollahi, M.R., Ashtari, R. And Mohammadabadi, M. (2005) “Finite Element Analysis Of Cnsr Specimen For Fracture Toughness Testing In Rock Materials” The Iranian Mining Engineering Conference, Tehran, Iran, Vol. 3, Pp. 1439-1450. (In Persian)
  • Ayatollahi, M.R. And Bagherifard, S. (2005) “A Review Of Mixed Mode Test Specimens For Rock And Ceramic Materials” The Iranian Mining Engineering Conference, Tehran, Iran, Vol. 3, Pp. 1451-1464. (In Persian)
  • Ayatollahi, M.R., And Aliha, M.R.M. (2004) “Fracture Initiation Angle In The Centrally Cracked Circular Disk Specimen” Proceedings Of The 15th European Conference On Fracture- Ecf15, Stockholm, Sweden.
  • Ayatollahi, M.R. (2004) “J-T Characterization Of Elastic-Plastic Stress Fields In A Mode Ii Crack Specimen” Proceedings Of The 15th European Conference On Fracture- Ecf15, Stockholm, Sweden.
  • Ayatollahi, M.R. And Zakeri, M. (2004) “In-Plane Modes Of Deformation In Crack Problems” Proceedings Of The 8th International Isme Conference, Tehran, Iran.
  • Ayatollahi, M.R. And Khojeh, A. (2004) “Effect Of Traverse Load On Fractyure Behavior Of A Cracked Specimen” Proceedings Of The 8th International Isme Conference, Tehran, Iran.
  • Ayatollahi, M. R. And Nikoobin, A. (2004) “An Experimental Method For Determination Of T-Stress” Proceedings Of The 5th Iranian Aerospace Society Conference, Pp. 379-386.
  • Ayatollahi, M.R. And Shokrani A.R. (2003) “Shear Geometry Factor For A Four-Point-Bend Crack Specimen” Proceedings Of The 7th International Isme Conference, Mashhad, Iran, Vol. 3, Pp 1159-1167.
  • Ayatollahi, M.R. And Nasr-Esfahani, M. (2003) “A Modification On The Minimum Distortional Strain Energy Density Criterion” Proceedings Of The 7th International Isme Conference, Mashhad, Iran, Vol. 3, Pp 1122-1128.
  • Ayatollahi, M.R., Aliniaziazi, A. And Aliha, M.R.M. (2003) “Stress Intensity Factors For A Weld Toe Crack In A Tubular Joint” Proceedings Of 6th International Conference On Civil Engineering (Icce 2003), Isfahan, Iran, Vol. 6, Pp 361- 366.
  • Ayatollahi, M.R. And Abbasi, H. (2003) “Effects Of Higher Order Strains On Brittle Fracture Based On Lefm” Proceedings Of The 4th Iranian Aerospace Society Conference, Tehran, Iran, Vol. 1, Pp 87-94.
  • Ayatollahi, M.R. And Ashtari, R. (2003) “Shear Deformation Effects In Blade Vibrations” Proceedings Of The 4th Iranian Aerospace Society Conference, Tehran, Iran, Vol. 1, 495-504.
  • Ayatollahi, M.R. And Asadkarami, A., (2002) “Finite Element Study Of A Double Edge Crack Specimen” Proceedings Of 14th European Conference On Fracture, Krakow, Poland, Vol. 1, Pp 153-160.
  • Ayatollahi, M.R., Pavier, M.J. And Smith, D.J. (2002) “A New Specimen For Mode Ii Fracture Tests” Proceedings Of 14th European Conference On Fracture, Krakow, Poland, Vol. 1, Pp 161-168.
  • Ayatollahi, M.R. (2002) “Evaluation Of Brittle Fracture In Spiral Weld Pipes” Proceedings Of International Conference On Helical Seam Submerged-Arc Welded Pipe In Oil And Gas Industry, Tehran, Iran.
  • Ayatollahi, M.R. And Zanbilbaf, A. (2002) “Fracture Trajectory In Shear Loading” Proceedings Of The 6th International Isme Conference, Tehran, Iran, Vol. 4, Pp 2111-2117.
  • Ayatollahi, M.R. And Ghandchi-Tehrani, M. (2002) “Dynamic Analysis Of A Straight Blade With Asymmetrical Cross-Section” Proceedings Of The 6th International Isme Conference, Tehran, Iran, Vol. 5, Pp 64-71.
  • Ayatollahi, M.R. And Smith D.J. (2001) “Lateral Load Effects In Brittle Fracture Of Internal Cracks” Proceedings Of The 6th International Conference On Biaxial And Multi-Axial Fatigue And Fracture, Lisbon, Vol. 2, Pp 983-990.
  • Ayatollahi, M.R., Mohammad-Aliha, M.R., Aliniaziazi, A. (2001) “ The Near-Tip Parameters For A Few Cracked Specimens” Proceedings Of The 5th International Isme Conference, Rasht, Iran, Vol. 1, Pp 441-448.
  • Ayatollahi, M.R. And Safari, G.H. (2001) “On The Determination Of The Stress Intensity Factors Using The Method Of Photoelasticity” Proceedings Of The 5th International Isme Conference, Rasht, Iran, Vol. 1, Pp 239-245.
  • Ayatollahi, M.R. And Abbasi, H. (2000) “A Modified Criterion For Mixed Mode Fracture” Proceedings Of The 1st International Aerospace Conference, Tehran, Iran, Vol. 3, Pp. 975-983.
  • Ayatollahi, M.R. And Abbasi, H. (2000) “Crack Growth Prediction Based On The Maximum Hoop Strain Criterion” Proceedings Of The 8th International Nmcm Conference, Slovakia, Paper No 94.
  • Ayatollahi, M.R. (2000) “Crack Tip Parameters For A Tension-Shear Specimen” Proceedings Of The 4th International Isme Conference, Tehran, Iran, Vol. 3, Pp. 61-66.
  • Smith D.J., Swankie, T.D., Ayatollahi, M.R. And Pavier, M.J. (1998) "Brittle And Ductile Failure Under Mixed Mode Loading", Proceedings Of 12th European Conference On Fracture (Ecf12), Sheffield, Uk, Vol. 2, Pp 661-666.
  • Ayatollahi, M.R., Smith D.J. And Pavier, M.J. (1997) "Displacement Based Approach To Obtain T-Stress Using Finite Element Analysis", Proceedings Of Asme-Pressure Vessel And Piping Conference, Orlando, Fl, Vol. 346, Pp 149-154.
  • Ayatollahi, M.R. And Fuladi, M., (1993) "Nonsymmetrical Vibration Of Thin Cylindrical Shells - An Energy Approach", Proceedings Of Iranian Society Of Mechanical Engineers Annual Conference, Tehran, Iran.
  • Ayatollahi, M.R. And Shahani, A.R., (1993) "Thermally Induced Vibrations Of Circular Plates", Proceedings Of Etce`93, Asme, Houston, Tx, Pd-Vol. 52, Pp. 45-49.
  • Ayatollahi, M.R. And Aghili, J., (1992) " Galerkin Approach In Finite Element Solution Of Asymmetrically Loaded Circular Plates ", Proceedings Of The Third National Congress On Mechanics, Vol. 2, Pp. 699-706, Athens, Greece.
  • Ayatollahi, M.R. (1991) " Static, Free And Forced Vibration Analysis Of Shell Of Revolution On Elastic Foundation ", Smirt 11 Transaction Vol. J, Pp. 165- 70.
  • Eslami, M.R. And Ayatollahi, M.R., (1991) " Dynamic Analysis Of Shell Of Revolution By Modal Analysis", Proceedings Of Asme-Pressure Vessel And Piping Conference, 23-27 June, San Diego, Ca., Vol. 218, Pp. 151-156.
  • Eslami, M.R., Ahmadian, H. And Ayatollahi, M.R., (1990) " Static And Dynamic Finite Element Solution Of Shell And Plate Of Revolution On Elastic Foundation", Proceedings Of Asme-Pressure Vessel And Piping Conference , Nashville, Tn., Vol. 194, Pp. 21-

 

  Bazdidi Tehrani, Farzad

  • Bazdidi-Tehrani, F., And Rajabi-Zargarabadi, M., 2008 , " Effect Of Turbulent Heat Flux Models On Prediction Of Film Cooling Characteristics, Proceedings Of Cht-08 (Ichmt) International Symposium On Advances In Computational Heat Transfer, Marrakech, Morocco, May.
  • Bazdidi-Tehrani, F., And Pezeshkpour, P., 2008, "Influence Of Compound Angle Injection On Film Cooling Through Two Staggered Rows Of Holes," International Conference On Fascinating Advancement In Mechanical Engineering (Fame2008), Mepco Schlenk Engineering College, Sivakasi, Tamilnadu, India, December.
  • Bazdidi-Tehrani, F., Jahromi, M., Karami, M., And Javadi, A., 2008, " Numerical Analysis Of A Zero Net Mass Flux Jet In A Quiescent Medium", 16th Annual Conference Of The Cfd Society Canada, University Of Saskatchewan, Saskatoon, May.
  • Bazdidi-Tehrani, F., Foroutan, H., Rajabi-Zargarabadi, M., 2008, "Film Cooling Heat Transfer Predictions: Effects Of Variable Turbulent Prandtl Number", 16th Annual Conference Of The Cfd Society Canada, University Of Saskatchewan, Saskatoon, May.
  • Bazdidi-Tehrani, F., And Houshfar, E., 2006, “Numerical Analysis Of Temperature & Flow Fields In The Single Row Film Cooling Technique Using Shaped (Elliptic) Holes,” The 10th Annual Fluid Dynamics Conference, The Physical Society Of Iran.
  • Bazdidi-Tehrani, F., And Houshfar, E., 2006, “Single Row Of Film Cooling Shaped (Elliptic) Holes: A Numerical Simulation,” The 14th Annual Conference And The 10th International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., Feizollahi, H., 2005, “Numerical Analysis Of Opposed Rows Of Coolant Jets Injected Into A Heated Crossflow,” Proceedings Of 3rd Int. Conference On Advanced Computational Methods In Engineering (Acomen2005), Ghent, Belgium, May.
  • Bazdidi-Tehrani, F., And Sabbaghi, M., 2005, “Two-Dimensional Axisymmetric Analysis Of Flow In The Diffuser-Combustor Region Of Gas Turbine Engine,” 13th Annual Conference And The 9th Int. Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., Feizollahi, H., And Jahromi, M., 2005, “Numerical Simulation Of Flow And Temperature Fields For Opposed Rows Of Coolant Jets,” 13th Annual Conference And The 9th Int. Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., Moslehishad, H., Rajabi-Zargarabadi, M., And Jahromi, M., 2005, “Numerical Simulation Of Effects Of Blowing Rate And Momentum Flux Ratios On Film Cooling Effectiveness,” 13th Annual Conf. & 9th Int. Conf. Of Iranian Society Of Mech. E
  • Yuan, Z., Mucciardi, F., And Bazdidi-Tehrani, F., 2004, “A Sensor For Continuous Temperature Measurement In Steel Making Environments," Proceedings Of The 16th World Conference On Nondestructive Testing (16wcndt), Montreal, Canada, August 30-September 3.
  • Bazdidi-Tehrani, F., And Rajabi-Zargarabadi, M., 2003, “Numerical Simulation Of Combustion Phenomenon In A Model Combustion Chamber,” Proceedings Of The Third Mediterranean Combustion Symposium, Marrakech, Morocco, June 8-13.
  • Bazdidi-Tehrani, F., And Jahromi, M., 2003, “Three-Dimensional Numerical Simulation Of The Flow Inside A Model Gas Turbine Combustor,” Proceedings Of The Eleventh Annual Conference Of The Cfd Society Of Canada (Cfd 2003), Vancouver, Bc, Canada, May 28-30
  • Bazdidi-Tehrani, F., And Naderi, M., 2003, “Numerical Analysis Of Laminar Heat Transfer In The Entrance Region Of A Finned Horizontal Channel,” The 11th Annual Conference And The 7th International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Rajabi-Zargarabadi, M., 2003, “Numerical Simulation Of Combustion Phenomenon In A Sample Combustion Chamber Together With Radiation Modelling,” The 11th Annual Conference And The 7th International Conference Of Iranian Society Of
  • Bazdidi-Tehrani, F., Haghparast-Kashani, A., And Shahmir, A., 2003, “Numerical Analysis Of Flowfield In The Dilution Zone Of A Sample Gas Turbine Annular Combustion Chamber,” The 4th Iranian Aerospace Society Conference.
  • Bazdidi-Tehrani, F., And Argian, J., 2002, “Numerical Analysis Of Viscous 3-D Turbine Cascade Flow In A Gas Turbine,” The 10th Annual Conference And The 6th International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Shahmir, A., 2002, “Turbulent Mixing Of A Single Row Of Coolant Jets With A Hot Confined Crossflow: A Numerical Simulation,” Proceedings Of The Ninth Asian Congress Of Fluid Mechanics, Isfahan, Iran, May 27-31.
  • Bazdidi-Tehrani, F., And Jahromi, M., 2002, “Numerical Simulation Of A Confined Swirling Flow In A Model Gas Turbine Combustor,” Proceedings Of The Ninth Asian Congress Of Fluid Mechanics, Isfahan, Iran, May 27-31.
  • Bazdidi-Tehrani, F., And Haghparast-Kashani, A., 2002, “Cfd Analysis Of A Single Three-Dimensional Jet Injected Normally Into A Crossflow,” Proceedings Of The Ninth Asian Congress Of Fluid Mechanics, Isfahan, Iran, May 27-31.
  • Bazdidi-Tehrani, F., And Zaman, S., 2001, “Two-Phase Heat Transfer On An Isothermal Vertical Surface : A Numerical Simulation,” Proceedings Of 2nd International Symposium On Advances In Computational Heat Transfer, Palm Cove, Queensland, Australia, May 20
  • Bazdidi-Tehrani,F., And Ghasemi, M., 2001, “Thermodynamic Analysis Of A Heat Pipe,” The 9th Annual Conference And The 5th International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Simonian, R., 2001, “Numerical Analysis Of Condensation In Annular Flow In A Horizontal Tube,” The 9th Annual Conference And The 5th International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Salehizadeh Manshadi, A., 2000, “Numerical Solution Of Fluid Flow In The Entrance Region Of A Finned, 2-D Channel,” The 8th Annual Conference And The 4th International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Mahmoodi, A.A., 2000, “Analysis Of Flow And Temperature Fields In The Single Hole Film Cooling Technique,” The 8th Annual Conference And The 4th International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Rezaei, M.T., 1998, “Numerical Analysis Of Boiling Heat Transfer In Annular Flow In Vertical Tubes,” The 6th Annual Conference And The 3rd International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Andrews, G.E., 1997, “Full Coverage Discrete Hole Film Cooling: Investigation Of The Effect Of Variable Density Ratio: Part-Ii,” Presented At The Asme Turbo Exposition, Orlando, Florida, June 2-5, Asme Paper No. 97-Gt-341.
  • Bazdidi-Tehrani, F., And Dashti, A., 1997, “Numerical Analysis Of Condensation Heat Transfer In Stratified Flow In Horizontal Tubes,” The 5th Annual Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Ahmadian, M.T., 1997, ”Numerical Analysis Of Slot Film Cooling In Turbulent Flow With Tangential Injection,” The 5th Annual Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Haghighi, A., 1996, ”The Effect Of Hole Size And The Number Of Holes On The Cooling Of Gas Turbine Combustors,” The 4th Annual Conference And The 2nd International Conference Of Iranian Society Of Mechanical Engineers.
  • Bazdidi-Tehrani, F., And Sarmadi, A., 1995, ”Heat Pump Design And Calculations With An Emphasis On Heat Transfer ,“ The 3rd Annual Conference Of Iranian Society Of Mechanical Engineers.
  • Andrews, G.E., Khalifa, I.M., Asere, A.A., And Bazdidi-Tehrani, F., 1995, “Full Coverage Effusion Film Cooling With Inclined Holes,” Asme Paper No. 95-Gt-274.
  • Rezaei, B., Bazdidi-Tehrani, F., And Ektesabi, M.R., 1992, “A Computer Program For Evaluation Of Radiative Heat Flux In The Water-Tube Boilers,” The Annual Conference On Pressure Vessels & Boilers.
  • Andrews, G.E., And Bazdidi-Tehrani, F., 1992, “Impingement/ Effusion Cooling,” Agard-Cp-527, 1992
  • Andrews, G.E., Bazdidi-Tehrani, F., Hussain, C.I., And Pearson, J.P., 1991, “Small Diameter Film Cooling Hole Heat Transfer: The Influence Of The Hole Length,” Asme Paper No. 91-Gt-344.
  • Andrews, G.E., And Bazdidi-Tehrani, F., 1989, “Small Diameter Film Cooling Hole Heat Transfer: The Influence Of The Number Of Holes,” Asme Paper No. 89-Gt-7.
  • Andrews, G.E., Alikhanizadeh, M., Bazdidi-Tehrani, F., Hussain, C.I., And Khoshkbar Azari, M.S., 1987, “Small Diameter Film Cooling Holes: The Influence Of Hole Size And Pitch,” Asme Paper No. 87-Ht-28.

  Bisadi, Hossein

  • Analysis Of Dynamic Loading In Plates By High Strain Rate,10thannual(International)Conference Of Mechanical Engineering,ISME2002
  • Experimental Study Of Explosive Welding And Forming Of Inhomogeneous Plates, 13thannual(International)Conference Of Mechanical Engineering,ISME2005,Mav 17-19,IUT,Isfahan,Iran
  • Regenerative Chatter Analysis In Turning Process Using Frequency Response Control Methods, Manufacturing Engineering Timce 2007
  • Study Of The Effect Of Spark Energy Distribution Surface On Mrr In The Electrical Discharge Mashining, Manufacturing Engineering Timce 2007
  • Experimental And Numerical Study Of Steel Plates Under A Mixture Of H2 +O2 Detenation, 10th INTERNATIONAL COMBUSTION SYMPOSIUM, 2008 ,Sakarya TURKEY
  • Aluminum Dome-Shape Bowls Production By Gas Detonation In Die-Less Forming,4th National Conference Of Metals Metals And Materials Forming MATFORM`87 ,Sharif University Of Technology 3-4 Dec. 2008-Tehran,Iran
  • Gas Detonation Forming By A Mixture Of H2+O2 Detonation, WCSET 2009 AMSTERDAM, September 23-25, 2009 Amsterdam
  • Finite Element Simulation Of Copper T-Branch Bulge Forming Using A Solid Bulging Medium, International Conference On Automotive And Mechanical Engineering,Oslo 2009 ICAME 2009

 

  Davaei Markazi, Amirhossein

  • M. Seidi And A. H. D. Markazi, "Model-Based Fuzzy Control Of Flexible Joint Manipulator: A Lmi Approach," In Mechatronics And Its Applications, Ieee Isma, 2008, Pp. 1-5 .
  • B. Rahmani, A. H. D. Markazi, And N. Mozayani, "Real Time Prediction Of Time Delays In A Networked Control System," In Communications, Control And Signal Processing (Isccp), 2 008, Pp. 1242-1245 .
  • B. Rahmani And A. H. D. Markazi, "A New Delay Prediction And Variable Gain Method For Control Of Systems Through Networks," In Iasted, Quebec, Canada, 2008 .
  • M. Askari And A. H. D. Markazi, "Multi-Objective Optimal Fuzzy Logic Controller For Nonlinear Building-Mr Damper System," In Systems, Signals And Devices, Ieee Ssd Amman, Jordan , 2008, Pp. 1-6 .
  • M. Askari And A. H. D. Markazi, "Application Of A New Copmact Optimized T-S Fuzzy Model To Nonlinear System Identification ," In Ieee Mechatronics And Its Applications, Amman, Jordan, 2008, Pp. 1-6 .
  • M. Kalantari, A. H. D. Markazi, And M. Riahi, "Failures In Elevators: Statistical Study And Redesign Of Failure Prone Subsystems," In Ticme2007, Tehran, 2007 .
  • S. Hayati , A. H. D. Markazi, And H. Rokni, "Robust Active Control Of Structures Under Seismic Excitations," In 9th Canadian Conf. On Eartquake Engineering, Ottawa, Canada, 2007 .
  • H. Rokni, A. H. D. Markazi, And S. Hayati, "A Semi-Active H2-Optimal Control Of A Seismically Excited Building Using Mr Dampers," In 14th International Mechanical Engineering Conference, Isfahan, 2006 .
  • S. Hayati, A. H. D. Markazi, And H. Rokni, "A Semi-Active H-Inf Optimal Control Of A Seismically Excited Building Using {Mr} Dampers," In 14th International Mechanical Engineering Conference, Isfahan, 2006 .
  • H. D. Markazi, "Optimal Pim Digital Redesign Method," In International Conference On Modeling, Simulation And Applied Optimization, Sharjah, Uae, 2005 .
  • Tadayoni And A. H. D. Markazi, "A New Software For Dynamic Energy Simulation Of Buildings Based On Autocad And Modelica Language," In 11th International Mechanical Eng. Conf., Mashad, 2003, Pp. 438-443 .
  • R. Solasi, "Dynamic Modeling Of An Internal Combustion Engine Using Modelica Language," In 4th Iranian Aerospace Society Conference, Tehran, 2003, Pp. 189-196 .
  • H. Davaie-Markazi, "A New Algorithm For Matched Pole/Zero Discretization," In 9th Ieee International Conference On Methods And Models In Automation And Robotics, Miedzyzdroje, Poland, 2003, Pp. 387-391 .
  • H. D. Markazi, N. Hori, K. Kanai, And T. Ieko, "A New Discretization Of Continuous-Time Control Systems And Its Application To The Design Of Flight Control Systems," In Society Of Instrument And Control Engineers (Sice) Conf., Kanazawa, Japan, 1993, Pp. 1199-1203 .
  • N. Hori, A. H. D. Markazi, N. P., K. K., And I. T., "Digital Model-Reference Flight Control Of Aircraft With Unstable Sampling Zeros," In 12th World Congress Of Ifac, Sydney , Australia, 1993, Pp. 297-302 .
  • H. D. Markazi And N. Hori, "A New Method With Guaranteed Stability For Discretization Of Continuous-Time Control Systems," In American Control Conference, Chicago, Usa, 1992 .
  • N. Hori And A. H. D. Markazi, "A New Approach To Digital Control Design," In Motion And Vibration International Conference (Movic), Yokohama, Japan, 1992

 

  Daneshjoo, Kamran

  • “Analysis Of Viscoelastic Boundary Conditions On Vibration Of A Beam”, 13th International Mechanical Engineering Conference, May 2005.
  • “Sound Transmission Analysis From Cylindrical Isotropic Shells With Infinite Length”, 13th International Mechanical Engineering Conference, May 2005.
  • “Calculation Of Rms Von-Mises Stress In Structures Under Random Vibration Using Svd Method”, 13th International Mechanical Engineering Conference, May 2005.
  • “An Efficient Algorithm For Failure Analysis Of Mechanical Structures Under Random Loading”, 12th International Mechanical Engineering Conference, May 2004.
  • “Estimation Of Propulsion System Acoustic Loads”, 12th International Mechanical Engineering Conference, May 2004.
  • “Computation Of Von-Mises Stress Distribution On Structures Under Random Loading Using Monte Carlo Simulation”, 12th International Mechanical Engineering Conference, May 2004.
  • “Flexible Satellite Simulator Design”, 12th International Mechanical Engineering Conference, May 2004.
  • “Structural Design And Modeling Of An Electromagnetic Launcher”, 11th International Mechanical Engineering Conference, May 2003.
  • “Simulation And Frequency Response Calculation Of A Space Structure Due To Random Vibration”, 11th International Mechanical Engineering Conference, May 2003.
  • “Conceptual Design Of Attitude Control Simulators For Rigid And Flexible Satellites”, Second Aero Space Industries Conference, Jan 2004.
  • “Conceptual Design Of Solar Array Mechanism”, Second Aero Space Industries Conference, Dec 2004.
  • “Design Of Satellite’s Acoustic Test Room”, Second Aero Space Industries Conference, Dec 2004.
  • “Random Vibration Analysis Of A Small Satellite”, Second Aero Space Industries Conference, Dec 2004.
  • “Design And Fabrication Of E-Glass / Silicone Composite With Elastic Properties, Using In Expandable And Retractable Space Structures”, 6th Iranian Metallurgy Conference, Nov 2002.
  • “Study Of Al 2024 Thermomechanical Aging And It’s Affects On Satellite Structural Weight”, First Metal Forming Conference, May 2002.
  • “Mathematical Model For Natural Frequencies Of A Satellite Structure”, Iranian Aero Space Conference, May 2002.
  • “Physical - Mechanical Property Optimization Of Tungsten - Copper Composites For Using In The Structure Of A Railgun E.M.L.”, 10th International Mechanical Engineering Conference, May 2002.
  • “Design Of Coil-Able Control Boom With Simple Mechanical Structure”, 10th International Mechanical Engineering Conference, May 2002.
  • “Dynamic And Shock Analysis Of A Satellite Structure”, 10th International Mechanical Engineering Conference, May 2002.
  • “Study Of Thermomechanical Aging In Tensile Properties Of Al 2024”, 5th Iranian Metallurgy Conference, Nov 2001.
  • “Study Of Infiltration Process In Optimizing The Tungsten - Copper Composite”, 5th Iranian Metallurgy Conference, Nov 2001.
  • “Design And Optimization Of A Satellite Stabilization”, 9th International Mechanical Engineering Conference, May 2001.
  • “Design And Static Analysis Of An Eml Structure With F.E. Method”, 9th International Mechanical Engineering Conference, May 2001.
  • “Integration Of Satellite Stabilization Control System”, First Iranian International Aero Space Conference, Jan 2001.
  • “Design Of Control Boom In Gravity Gradient Stabilization”, 8th International Mechanical Engineering Conference, May 2001.
  • “Analytical Model Of Sound Transmission Through Orthotropic Cylindrical Shells”, 13th Annual (International) Mechanical Engineering Conference May 2005 Isfahan University Of Technology. Isfahan, Iran.
  • “Developing An Efficient Method In Small Satellite’s System Integration In The Phase Of Conceptual Design”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
  • “Design, Analysis And Modeling Of An Electromagnetic Launcher (Hpel)”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
  • “Reliability And Failure Analysis Of A Small Satellite Under Random Loading”, 12th Annual (International) Mechanical Engineering Conference, May 2004.
  • “Effect Of Spin Stabilized Attitude Control System On Small Satellite’s Configuration In The Conceptual Design Phase”, International Aerospace Conference, Feb 2004.
  • “Structural Analysis Of Space Vehicle Using Tresca Stress Criterion In Random Vibration Environment”, International Aerospace Conference, Feb 2004.
  • “Tribological Problems In Space Mechanisms”, International Aerospace Conference, Feb 2004.
  • “Formulization Of Satellite Structure Conceptual Design”, 11th International Mechanical Engineering Conference, May 2003.
  • “Design, Fabrication And Testing Of A Coil-Able Control Boom In Scaled Laboratory Model For A Small Satellite”, International Aerospace Conference, Feb 2003.
  • “Design And Analysis Of Z-Sat Control System”, 10th International Mechanical Engineering Conference, May 2002.
  • “Faragam Algorithm In Satellite Layout”, The 6th Apc-Mcsta, Sep 2001.
  • “Design And Analysis Of Zs3-Sat Structure”, 9th International Mechanical Engineering Conference, May 2001.
  • “Satellite Simultaneous Attitude Orbit Determination Via Kalman Filtering Of Magnetometer Data”, 9th International Mechanical Engineering Conference, May 2001.
  • “Effects Of Orbital Perturbation On Trajectory Of The L.E.O Satellite”, International Aerospace Conference, Dec 2000.
  • “Dynamic Modeling And Stability Analysis Of Z-Sat”, Aiaa Modeling And Simulation Conference, August 2000.
  • “Control Boom Design Of Z-Sat”, Aiaa Modeling And Simulation Conference, August 2000.
  • “Structural Design Of Z Satellite”, 5th Apc-Mcsta, 1999

  Derakhshan, Shahram

  • Nourbakhsh A., Derakhshan S., Bagheri S. 2008. Mini and Micro Hydropower Stations for Production Inexpensive Energy. HIDROENERGIA 2008-05-04, International Conference and Exhibition, "Small Hydropower", 11-13 June, Bled-Slovenia.
  • Riasi A., Mirian R., Derakhshan S., "Frequency Analysis of Francis Hydropower Plant Using Characteristics Method with the Aid of Unit Impulse Response", HYDRO 2006 ~ Maximizing the benefits of Hydropower, Porto Carras, Greece, 25- 28 September 2006.
  • Nourbakhsh A., Derakhshan S., "Prediction of Pump as Turbine's(PAT) best efficiency point(BEP) by theoretical method”, WSEAS/IASME International Conference on Fluid Mechanics and Heat and Mass Transfer,2004, August 17-19, Corfu Island, Greece.
  • Nourbakhsh A., Derakhshan S., “Pump used as Turbine in Small Hydropower Stations”, The First Cappadocia International Mechanical Engineering Symposium (CMES1-04), 2004, July,14-16 Cappadocia-Uerup, Turkey.
  • Shokouhmand H., Derakhshan S., “Gas Turbine Cycle with Steam Water Injection Recuperation Cycle (SWIR) and Inter Cooling (IC)”, The First Cappadocia International Mechanical Engineering Symposium (CMES1-04), 2004, July, 14-16 Cappadocia-Uerup, Turkey.
  • Nourbakhsh A., Derakhshan S., “Prediction of Pump as Turbine Performance in Small Hydropower Stations”, pp.31, Conference of Iran Society of Mechanical Engineering, 2004, May, 18-20 Tehran Iran.

 

  Djavanroodi, Faramarz

  • F. Djavanroodi and M. Ebrahimi, [2010]. “Computational analysis of sheet via continuous equal channel angular pressing”, 10th Iranian Conference on Manufacturing Engineering – ICME, 2010, Babol Noshirvani University of Technology . Babol, Iran
  • F. Djavanroodi and M. Ebrahimi, [2009]. “Effect of die channel angle in equal channel angular pressing”, 9th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran
  • F. Djavanroodi and M. Ebrahimi, [2009]. “Mechanical properties of commercial pure aluminum in the ECAP process”, 9th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran
  • K. Asghari, F.DJavanroodi, R. Madoliat, H.Shahabbaspour, [2009]. “Prediction the Fracture Mechanics Parameter Using Artificial Neural Networks” ISME international mechanical engineering congress, Tehran University, 19-21-May, 2009.
  • P. Koochebaghi, R. Madoliat, F.Djavanroodi and S. Eskandari, [2007]. “ Prediction of cold rolling force in 1100 aluminium sheet using Artificial Neural Networks ” 2 nd Tehran international congress on manufacturing engineering, - ICME, 2007, Iran University of Science and Technology, Tehran, Iran.
  • M.Gheisary, F.Djavanroodi, [2007]. “Friction and Strain Hardening Coefficient on Double Bulge Tube Hydroforming” 2 nd Tehran international congress on manufacturing engineering, - ICME, 2007, Iran University of Science and Technology, Tehran, Iran.
  • Djavanroodi, F. Derogar, A. [2009]. “Experimental evaluation of forming limit diagram for Ti6Al4V titanium alloys sheets using floating disc” 8th International conference of Iranian Aerospace Society, - IAS2009, Malek Ashtar University, Isfahan, Iran
  • Djavanroodi, F. Derogar, A. [2009]. “ Calculation of Forming Limit Diagram (FLD) for Ti-6Al-4V sheet with Experimental Data & Finit Element Method & Artificial Neural Network ”, 9th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran.
  • Djavanroodi, F. Nosrati, M. Derogar, A. [2008]. “Application of neural network in calculating stress intensity factor for three point bend test” 7th International conference of Iranian Aerospace Society, - IAS2008, Sharif University of Technology, Tehran, Iran
  • Djavanroodi, F. Nosrati, M. Derogar, A. [2008]. “Stress intensity factor calculation using numerical and neural network” ISME2008 international mechanical engineering congress, Shahid Bahonar University, Kerman, Iran.
  • H.R. Molladavoudi 1, F. Djavanroodi, [2009]. “Experimental study of the effects of thickness reduction on Mechanical properties and spinning accuracy for aluminum 7075-O , during flow forming”, 9th Iranian Conference on Manufacturing Engineering, – ICME, 2009, The University of Birjand, Birjand, Iran
  • H.R. Molladavoudi 1, F. Djavanroodi, [2009]. “Influence of feed rate on Mechanical properties and spinning accuracy for aluminum 7075-O , during flow forming” 8th International conference of Iranian Aerospace Society, - IAS2009, Malek Ashtar University, Isfahan, Iran
  • Sh. Abbasnejad D, H. Nezami.E, F. Djavanroodi, [2008]. “EXPERIMENTAL AND NUMERICAL ANALYSIS FOR HYDROFORMING OF ALUMINUM ALLOY, Al 7075, ASSISTED BY FLOATING DISK”, The 13th International Conference on Machine Design and Production 03-05 September 2008, Istanbul, Turkey.
  • H. Nezami. E, Sh.Abbasnejad. D, F. Djavanroodi, [2008]. “A NEW EXPERIMENTAL METHOD FOR HYDROMECHANICAL DEEPDRAWING OF TITANIUM ALLOY, TI6Al4V”, The 13th International Conference on Machine Design and Production 03-05 September 2008, Istanbul, Turkey.
  • Sh. Abbasnejad D, H. Nezami.E, F. Djavanroodi, [2009] . “ A New Method of Ti6Al4V Hydroforming, Used in Aerospace Structures ” 8th Iranian Aerospace Society Conference Feb. 2009, Malek-e-Ashtar University of Technology, Isfahan, Iran.
  • Sh. Abbasnejad D, H. Nezami.E, F. Djavanroodi, [2009] . “ Obtaining the flow stress curve of Aluminum alloy sheet, Al7075, from hydraulic bulge test ”, 5th International Conference and Exhibition on Design and Manufacturing of Machines and Dies/Molds, June 2009, Kushadasi, Turkey.
  • Djavanroodi, F. Nikbin, K. Kargar-nejad, S. Hamrang, A. [2007]. “Three dimensional stress analysis and life assessment of gas turbine blade“ 15th International Conference on mechanical engineering- ISME 15-17, May 2007 Amir Kabir University of Technology, Tehran, Iran.
  • Djavanroodi, F. Abrinia, K. and Pirgholi, A. [2007]. “Clearance and die V- ring radius effects on fine blanking using finite element method“ 15th International Conference on mechanical engineering- ISME 15-17, May 2007 Amir Kabir University of Technology, Tehran, Iran.
  • Djavanroodi, F. Kargar-nejad, S. and Hamrang, A. [2006]. “ Numerical determination of Limit Load using Elastic Modulus Reduction (E.M.R . ) method“ The Third International Conference On Advances In Mechanical Engineering And Mechanic 24-26, Dec. 2006, Tunesia .
  • Djavanroodi, F. Sabeghi, M. [2006]. “ Analysis of parameters affecting warping in radial forging process ’’. 7th world congress on computational mechanics 16-22, July , 2006 USA.
  • Djavanroodi, F. Rahmani, V. [2006]. “ Fatigue failure and life estimation of a cold forging die using a Finite element analysis ’’ . 14th International Conference on mechanical engineering- ISME Apr 2006 Esfahan University of Technology, Esfahan, Iran.
  • Djavanroodi, F. and Sabeghi, M. [2005]. “ Analysis of the effective parameters on the radial process by a 2D finite element method“ Tehran International Congress on Manufacturing Engineering (TICME 2005) 12-15, Dec. 2005 , Tehran, Iran.
  • Djavanroodi, F. Gowhari-Anaraki, A. R. [2005]. “ Low cycle fatigue life prediction for spot-weld joints’’. 5th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics 18-20 May 2005, USA.
  • Djavanroodi, F. and Soltani, A. [2001]. “Life Assessment and Extension of 1%Cr1/2%Mo Pipe Steel.”5th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P11 - 21.
  • Djavanroodi, F. and Shariari, D. [2001]. “Design and Analysis Using Finite Element Method For Fixture used in Production of Turbine Blade.” 5th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P595 - 607.
  • Djavanroodi, F. and Nikbin, K. [2001]. “Prediction of Crack Growth and Residual Life under Creep Loading”. 5th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P93 - 107.
  • Djavanroodi, F. and Karimi, H. [2001]. “Life Assessment and Extension of Nickel Base Supre Alloy IN738L.C. used in Gas Turbine Blades”. 5th International Mechanical Engineering Conference, isme2001, Tehran, Iran. P521 - 531.
  • Ahmadian, H. and Djavanroodi, F. [2001]. “Sensitivity of Geometrical Tolerances on Turbine Blades Natural Frequencies”. 5th International Mechanical Engineering Conference, ISME2001, Tehran, Iran. P741 - 746.
  • Djavanroodi, F [1998]. “Remnant Life Assessment of Super Alloy IN 738 L.C. Gas Turbine Blades” Proceedings of the sixth International Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
  • Djavanroodi, F. [1998]. “Analytical Behaviour of Multi-Layer Springs Used in Military Applications”. Proceedings of the sixth International Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
  • Djavanroodi, F. [1998]. “Fatigue Life Assessment of Dies used in Manufacturing Car Components” Proceedings of the sixth International Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
  • Djavanroodi, F. [1995]. “Manufacturing of Steam Turbine Blades from Recycled Material” Proceedings of the third Annual Conference, Institute of Mechanical Engineers, Tehran, Iran.
  • Djavanroodi, F. Nikbin, K. and Webster, G.A. [1994]. “Prediction of Transient Effect During Early Stages of Creep Crack Growth’’. 10th European conference of Fracture Mechanics 20 - 23 September 1994, Berlin, FRG.
  • Djavanroodi, F. Nikbin, K. [1994] “High Temperature Crack Growth in Low Alloy steels and Nickel - Base super Alloy Steel Under Static and Cyclic Loading.” Localized Damage 94 - 21 to 23 June 1994, Udine, Italy.
  • Djavanroodi, F. Nikbin, K. and Webster, G.A. [1994]. “Influence of Service Exposure Frequency and Size Effect on High Temperature Crack Growth on A 1%Cr 1%Mo 1/4%V Rotor Steel and 21/4%Cr 1%Mo Pipe Steel.” Material For Advanced Power Engineering 3 - 6 October 1994, Liege, Belgium.
  • Djavanroodi F. Nikbin, K. [1993]. “Engineering Concepts in High Temperature Design and Life Prediction Extension Procedure in the Power Generation Industry.” 8th International Power system Conference, Tehran, Iran, pp.219 - 227.
  • Djavanroodi, F. [1993]. “Mechanical Behavior of Alloy Steel Used in Steam Turbines Under Static and Cyclic Loading at High Temperatures.” 2nd Annual Conference, Institute of Mechanical Engineers 1993, Tehran, Iran.
  • Djavanroodi, F., Etemad, M. and Nikbin, B. [1992]. “A High Temperature Life Prediction Crack Growth Methodology for the Power Generation Industry.” 7th International Power system Conference, Tehran, Iran, pp.182 - 193.
  • Djavanroodi, F., Abrinia, K. and Blourbar, A. [1992]. “Determination of the Crack Growth Behaviour Pre-Exposed 14MoV63 Steel” Proceedings of the first Annual Conference, Institute of Mechanical Engineers, Tehran, Iran. pp.61 – 63
  • Djavanroodi, F. and Webster, G.A. [1990]. “Influence of Service Exposure on High Temperature Crack Growth in Low Alloy Steels.” High Temperature Materials for Power Engineering, part I (Ed) E. Bachelet et al, Kliwer academic Publishers, Liege, Belgium. pp. 705 - 714
  • Hollstein, T., Webster, G.A. and Djavanroodi F. [1990]. “Creep crack Growth in a 1%CrMoV Steel and a 32%Cr Alloy”. Proceedings of the 8th European Conference on Fractures, Torino, Italy. Published in Fracture Behaviour and Design of Materials and Structures, Vol. III, EMAS, Warley. pp. 1249 - 1256.
  • Hollstein, T., Webster, G.A. and Djavanroodi F. [1989]. “Creep Crack Growth in 1%CRMOV Steel” An elevation of Cost 505 Creep Crack Growth Round Robin, prepared for the European Economic Community.
  • Hollstein, T., Webster, G.A. and Djavanroodi F. [1989]. “Creep Growth in 1%CrMoV Steel and Alloy 800H” The Results of an EGF Round Robin, IWM Report.
  • Hollstein, T., Webster, G.A. and Djavanroodi F. [1988]. “High Temperature Crack Growth in Alloy 800H and a 1%CrMoV Steel - The Results of a Round Robin” Proceedings of the 7th European Conference of Fracture, Budapest, Hungary, Published in Failure Analysis - Theory and Practice, Vol.II, EMAS. pp. 656 – 668

 

 

  Habibnejad, Moharam

  • Inertial Measurement Unit Error Handling For Mobile Robot:Expert Algorithms Approach
  • Determination Of Maximum Load Of Flexible Manipulators Imposing Residual Vibration Constraint
  • Modeling, Simulation, And Experimental Analysis Of 6r Robot
  • Dynamic Simulation Of Nanoparticle Manipulation Based On Afm Nano-Robot
  • Maximum Payload Of Flexible Manipulators
  • Simulation Of Nan-Manipulation: Force Analysis
  • A Vision System Based On Neural Network For A Mobile Robot And Statistical Analyses Of Its Errors
  • Location Estimation Of A Mobile Robot By Neural Network
  • Infulence Payload On Residual Vibation Of Flexible Manipulators
  • Simulation Of Nan-Norobot (Afm)
  • Maximum Dynamic Load Carrying Capacity In Flexible Joint Robots Using Sliding Mode Control
  • Maximum Dynamic Load Carrying Capacity Of 6ups-Stewart Platform Flexible Joint Manipulator
  • Application Of Painting Robot In Car Industry
  • Metal Forming And Effect Of Different Parameters On Tesion
  • Determination Of Optimal Load For A Given Path Using Optimal Control
  • Dynamic Modeling Of Nan-Norobot (Afm)
  • Optimum Design Process Of Robot Using Fmea Analysis
  • Modeling And Experimental Analysis Of Flexible Mobile Robotic Manipulator
  • Design, Manufacture And Experimental Analysis Of 3r Robotic Manipulator
  • Maximum Dynamic Payload Carrying Capacity Of 6ups-Stewart Platform Manipulator
  • Maximum Dynamic Load Carrying Capacity In Flexible Joint Robots Using Sliding Mode Control
  • Design & Manufacturing Of A Robot Wrist: Performance Analysis
  • Design & Manufacturing Of A Robot Wrist And Experimental Analysis
  • Modeling, Design And Simulation Of Mechanical Manipulator And Experimental Analysis
  • Feedback Linearization Of Flexible Joint Manipulator
  • Analysis And Design Of Robot For Participating In Robo Contest
  • Dynamic Load Carrying Capacity Of Flexible Joint Robot With Feedback Linearization
  • Mechanical Design And Modeling Of An Omni-Directional Mobile Robot
  • Performing Laboratory Tests For 3p Robot Using Vision
  • Design, Modeling And Experimental Analysis Of Wheeled Mobile Robots
  • Design Of Mechanism For Nut Feeder
  • Design And Simulation Of Manipulator For Carrying Of Automobile Petrol Tank
  • Modeling, Simulation And Odometry Test Of Differential Mobile Robot
  • Dynamic Load Carrying Capacity Of Flexible Joint Mechanical Manipulator
  • Training Of Medium Size Robot Using Neural Network
  • Training Of Vision System Of Soccer’s Robot By Using Neural Networks
  • Modeling, Simulation And Control Of Robot By Programmable Logic Controllers
  • Dynamic Load Carrying Capacity Of Mobile Base Flexible Robots
  • Applied Multimedia System For Analysis And Mechanical Design Of Robot
  • Hardware Control Of Mobile Robot In Anonymous Environments
  • Effect Of Base Replacement On Maximum Load Of Mechanical Manipulator
  • Manufacturing Of 3p Sealer Robot
  • Simulation And Experimental Test Of Robot Using Vision
  • Localization Of Medium Size Robot
  • Design And Manufacturing Of Prismatic Robot For Assembly Line
  • Design And Manufacturing Of Succor Robot
  • Application Of Plc In Robotic Work Cell
  • Application Of Robot In Hospital
  • Robotic Educational Software Using Multimedia System
  • Distributed Modeling Of Flexible Mechanical Manipulator
  • Modelling Of Prismatic Robot On Sealing Station
  • Robotics Intelligent Data Base
  • Feasibility Study Of Glass Making Robot
  • Application Of Standard In Research Managements
  • Flexible, Distributed Mechanical Arm Design
  • Mathematical Modeling And Simulation Of Differentially Wheeled Mobile Robots Using Lagrange’s Approach
  • Robotics Multimedia Software For Conceptual Understanding
  • Multimedia Software For Engineering Mathematics
  • Numerical And Experimental Analysis Of Flow On Car
  • Mathematical Analysis Of Constraint And Redundancy Of Mobile Robots
  • Mathematical Modeling And Simulation Studies Of Mobile Robots
  • Effect Of Mathematica On Teaching And Learning
  • Industrial Application Of Plc
  • Path Planning Of Mobile Robot
  • Modeling And Simulation Of Autonomous Mobile Robot
  • Sequential Integration Method For Solution Of Flexible Manipulator Dynamics
  • Kinematics And Dynamics Of Flexible Manipulator Using Rls Method
  • Intelligent Mobile Robot For Disables
  • Kinematics And Dynamic Modeling Of The Human Shoulder: A Robotic Approach
  • A Novel Simulation And Experimental Setup For Mobolab Robot
  • Numerical Control Of Emco Turn 220
  • Optimization Of Mechanical Manipulator Subject To Load Carrying Capacity
  • Multimedia Training Materials For Mechanical Manipulator
  • Design Of Non-Holonomic Wheeled Mobile Robot
  • Motion Planning For Mobile Robots In The Presence Of Stationary Obstacles
  • Dynamic Equation Analysis Of Atlas Ii Robot
  • Design And Modelling Of Gas Turbine Blade Using Rapid Prototyping Cad/Cam/Sla
  • Modeling And Simulation Of Cement Kiln
  • Control Of Gripper Position Of Atlas Ii Robot
  • A Novel Experimental Set Up For Atlas Ii Robot Using Visual Basic
  • Computer Animation Of Mechanical Manipulators Using Mathematica
  • Maximum Load Of Elastic Joint Robot For A Given Dynamic Trajectory
  • Light Weight Robot Dynamic Using Equivalent Rigid Link
  • Recursive Formulation Of Robot And Its Application On Maximum Load
  • Optimum Tool Path Generation For Machining Of Sculptured Surfaces
  • Design And Modelling Of Gas Turbine Blade Using Cad/Cam/Sla
  • Experimental Design Of Atlasii Robot Using Visual Basic
  • Design And Modelling Of Gas Turbine Blade Using Rapid Prototyping Cad/Cam/Sla
  • Optimal Time Control Of Robot For A Given Trajectory
  • Symbolic Derivation Of Dynamic Equation Of Motion Of Motion For Flexible Manipulators
  • Efficient Elastic Robot Inverse Dynamics Algorithm Using Pc-Based Symbolic Manipulation
  • Synthesis Of Flexible Manipulator Dynamic Motions With Maximum Load Carrying Capacities
  • Effect Of Dynamic Of Load And Joint Flexibility On The Recursive Lagrangian Dynamics Of Flexible Arm
  • Dynamic Load Carrying Capacity For A Multi-Link Flexible Arm
  • Symbolic Derivation And Dynamic Simulation Of Flexible Manipulators
  • Load Carrying Capacity For A Two-Link Planer Flexible Arm

 

  Hosseinalipoor, S. Mostafa

  • Hosseinalipour, S. M. And Mohaghegh, F.,“Parametric Study Of Propagation And Vaporization Of Droplets Flow In Free Atmosphere And Their Effects On The Distribution Of Droplet Vapor Density”, 5th Iranian Aerospace Society Conference, Pp. 425 – 434, 2004
  • Hosseinalipour, S. M. And F.,“The Simulation Of Flow And Combustion In A Missile Liquid Engine”, 5th Iranian Aerospace Society Conference, Pp. 435 – 444, Hesa, Esfahan, Iran, 2004.
  • Aslani, S. M. Hosseinalipour,”A Review On Dynamic Simulation Methods For Si Engines” Internal Cmbustion Engines Conference, Tehran, Iran, 2004.
  • Hosseinalipour, S. M. And F. Mohaghegh, “A Parametric Study For The Propagation And Evaporation Of Droplets Flow And Its Effects On The Distribution Of Droplet Vapor Density In Free Atmosphere” 8th Fluid Dynamics Conference, Pp>, Tabriz, Tehran, 2003.
  • Bidabadi M., S. M. Hosseinalipour And S. A. Fakr Tabatabaei, “The Numerical Investigation Of Different Equilibrium And Non-Equilibrium Models Of The Droplet Evaporation For Two-Phase Flows Simulation” 8th Fluid Dynamics Conference, Tabriz, Tehran, 2003
  • Amoli A. And S. M. Hosseinalipour, “The Analytical Simulation Of One Dimensional Flow In An Grooved Turbo-Molecular” 8th Fluid Dynamics Conference, Pp>, Tabriz, Tehran, 2003.
  • Hosseinalipour, S. M., M. T. Shervanitabar And J. Ghafori, “The Experimental Investigation Of Initiation Of Cavitation In A Centrifugal Pump” 8th Fluid Dynamics Conference, Pp>, Tabriz, Tehran, 2003.
  • Mirsajedi S. M., Hosseinalipour, S. M. And R. Ebrahimi, “The Study Of Velocity And Pressure On Teylor Circulations Between Two Rotating Cylinders” 8th Fluid Dynamics Conference, Pp>, Tabriz, Tehran, 2003.
  • Doustdar M. M., K. Mazaheri And Hoseinalipour, S. M., “A Study Of Initial Conditions Effects On The Detonability Of Confined Fuel-Air Cloud” 4th Iranian Aerospace Society Conference, Pp. 152-160, Tehran, Jan. 2003.
  • Hoseinalipour, S. M., Ebrahimi, R., Zarbafian, A. H., “Modeling Of Liquid Propellant Rocket Engines, Part I: Simulation Of Transient Flow In Feed System,”4th Iranian Aerospace Society Conference, 228-235, Tehran, Jan. 2003.
  • Ebrahimi, R., Hoseinalipour, S. M., Zarbafian, A. H., “Modeling Of Liquid Propellant Rocket Engines, Part Ii: Transient Simulation Of Engine Component,” 11th Isme Conference, Mashhad, May 2003
  • Aslani, A., Hosseinalipour, S. M., Shahbakhti, M., Jazayeri, S. A., Ohadi, A., And Azady, S., “Dynamic Modelling Of Pfi Ingector Engines For Air Fuel Ratio Assesment” Vol. 2, Pp. 773 – 785, Isme 11th Conference, Mashhad, May 2003.
  • Hoseinalipour, S. M., Ebrahimi, R., Mohammadpour D., M., “Simulation Of Vapor Disublimation Rate From Vapor-Gas Stream In Horizontal Channel,” Vol. 2, Pp. 605 – 611, 11th Isme Conference, Mashhad, May 2003.
  • Hoseinalipour, S. M., Ebrahimi, R., Shahrokhi. A., “Temperature Estimation Of The Internal Part Of A Supersonic Rocket” Vol. 2, Pp. 561 – 570, Isme 11th Conference, Mashhad, May 2003.
  • Amoli, A., Hoseinalipour, S. M. And, Ebrahimi, R., “Direct Simulation Of Free Molecular Flow In Fully 3-D Axial Rotor”, Aiaa Paper 2003-3777, 36th Aiaa Thermophysics Conference, Orlando, Florida, Jun. 2003.
  • Hoseinalipour, S.M , Doustdar M. M, Mazaheri, And, “Numerical Study Of Ground Effect On The Detonability Characteristics The Rotor-Stator Performance Of A Turbomolecular Pump With A Real Topology”, 11th Annual Conference Of The Cfd Society Of Canada, 2003
  • Amoli, A., Ebrahimi, R., And Hoseinalipour, S.M., “The Rotor-Stator Performance Of A Turbomolecular Pump With A Real Topology”, 11th Annual Conference Of The Cfd Society Of Canada (Cfd03), Vancouver, 2003.
  • Hoseinalipour, S. M., Amoli, A., Ebrahimi, R., “3-D Simulation Of Free Molecular Flow Within Spiral-Grooved Molecular Pump,” 10th Annual Conference Of The Cfd Society Of Canada (Cfd02), Pp. 456-461, Windsor, Canada, June 2002
  • Doustdar, M. M., S. M. Hoseinalipour And K. Mazaheri “Numerical Study Of Two-Phase Unconfined Fuel-Air Cloud Charastristics To Consider Its Detonability” 10th Annual Conference Of The Cfd Society Of Canada (Cfd02), 204-210, Windsor, Canada, June 2002.
  • Hoseinalipour, S. M., Amoli, A., Ebrahimi, R., “Effect Of Non-Parallel Blades On Axial-Turbo Molecular Pump Performance” 9th Asian Congress Of Fluid Mechanics, Isfahan, 2002.
  • Doustdar M. M., K. Mazaheri And S. M. Hoseinalipour, “A Numerical Solution For Far-Field Regime In Fuel-Air Explosive Devices” 9th Asian Congress Of Fluid Mechanics, Isfahan, 2002.
  • Hoseinalipour, S. M., Amoli, A., Ebrahimi, R, “3-D Simulation Of Free Molecular Flow Within Axial- Turbo Molecular Pump,” 10th Isme Conference, Vol. 3, Pp 2000- 2006, Khajehnasir University Tehran, 2002.
  • Hoseinalipour, S. M., Haghroosta M. R., “Mathematical Modelling Of Drum Dryers” P.P, 123 - 132, The Second Asian-Oceania Drying Conference, Adc’01, Pinang, Malaysia Aug. 2002.
  • Forozani, H. And S. M. Hoseinalipour, “The Study Of Flame Temperature In Industrial Gas Turbine Combustion Chamber On Nox Production”, 10th Isme Conference, Vol. 3 , Pp 1402- 1409, Khajehnasir University, Tehran, Iran, 2002.
  • Hosseinalipour, S. M. And Behzad, M., “An Investigation Of The Simulation Of Momentum Sinks For A Row Of Squared Pipes In Laminar Regimes”, 10th Isme Conference, Vol. 3 , Pp 1703- 1710, Khajehnasir University, Tehran, Iran, 2002.
  • Hosseinalipour, S. M. And Behzad, M., “An Investigation Of The Turbulent Kinetic Energy Sink Effects Of The Porous Medium In The Flow Through A Row Of Squared Channels ”, 10th Isme Conference, Vol. 3 , Pp 1703- 1710, Khajehnasir University, Iran, 2002
  • Hayatbakhsh, A., And S. M. Hosseinalipour, “Simulation And Performance Investigation Of Internal Ballistic Of Power Plant Water Tube Boiler”, 9th Isme Conference, Vol. 2, Pp 103- 108, Gylan, Iran, 2001.
  • Forozani, H. And S. M. Hoseinalipour, “Injection Of Steam Into Gas Turbine For Power And Efficiency Augmentation”, 9th Isme Conference, Vol. 2, Pp 371- 378, Gylan, Iran, 2001.
  • Hosseinalipour S. M., And Zarbafyan, A. H., “The Design Of A Solid Fuel Starter” First International And Third Iranian Aero-Space Conference, Vol. 1, Pp 465- 473, Sharif University,Tehran, Iran, 2000.
  • Hosseinalipour S. M., Navaei Motlagh, K., “ A Mathematical Model For Once-Through Electrical Power Plant Boiler” 9th Isme Conference, Vol. 2 , Pp 699- 705, Isme 2000, Sharif University, Tehran, Iran, 2000.
  • Salmanian, O., K. Mazaherie, K. And S. M. Hosseinalipour, “The Investigation And Simulation Of Erosive Burning Of Homogenuous Solid Propelants”, First Scientific- Applied Conference Of Aerospace Organization, Vol. 6, Pp. 176 – 187, Tehran, Iran, 2000
  • Hoseinalipour, S. M. And Baharei, M., “The Study Of Flow Through Axial Flow Comperessor”, 7th Isme Conference, Vol. 2, Pp. 599 – 605, Systan University, Systan, Iran, 1999.
  • Hoseinalipour, S. M. And Deilami D., “Injection Simulation For Determination Of Droplets Size And Velocity Distribution”, 7th Isme Conference, Vol. 2, Pp. 669 – 676, Systan University, Systan, Iran, 1999.
  • Hosseinalipour, S. M. “The Simulation Of Flow And Heat Transfer In Opposing Jets”,5th Fluid Dynamics Conference, Pp. 214 – 221, Mashhad University, Mashhad, Iran, 1998.
  • Hosseinalipour, S. M., A. S. Mujumdar, R. Nassef, “A Two Phase Model Simulation For Drying Of Solid Particles In Confined Two Dimensional Impinging Streams”, Pp 495 – 502, Cfd96, Fourth Annual Conference Of The Cfd Society Of Canada, Ottawa, Ontario,1996

 

  Hosseini Hashemi, Shahrokh

  • Hosseini Hashemi Sh., Maduliat R., and Kalhor R., (2010) "Combined effects of shear deformation and permanent indentation on impact response of rectangular Mindlin plates wiyh two opposite edges simply supported ", Proceedings of 18th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., Azim zadei M.,and Rokni damavandi H. (2010) "3-D free vibration analysis of piezoelectric coupled circular/anuular thick plates via Chebyshev-Ritz method ", Proceedings of 18th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., and Ruhii H., (2010) "A closed-form solution for fully simply supported rectangular thin plates containing crack",Proceedings of 18th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., Maduliat R., and Kalhor R., (2010) "Low velocity impact on relatively thick rectangular plate under in-plane loads resting on Pasternak elastic foundation ", International Conference on Lightweight Construction and Earthquake, Kerman, Iran.
  • Hosseini Hashemi Sh., Ruhi H., and Azim zadei M., (2010) "Analytical solution for free vibration of moderetly thick rectangular plates containing crack ", Proceedings of 9th Annual International Conference of Iranian Aerospace Society, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Amini M., (2010) "Three dimensional vibration analysis of functionally graded super-elliptical plates on Pasternak foundation", Proceedings of 9th Annual International Conference of Iranian Aerospace Society, Tehran, Iran.
  • Hosseini Hashemi Sh., Amini M., and Omidii H., (2010) "Analysis of the vibrational behavior of the composite elliptical plates reinforced with non-uniform distributed carbon nanotubes using micro-mechanical approach ", Proceedings of 9th Annual International Conference of Iranian Aerospace Society, Tehran, Iran.
  • Hosseini Hashemi Sh., Fadaie M., and Musavi H., (2009) "Acoustic resulting from forced vibration of moderetly anuular thick plate using the third order shear deformation theory", Proceedings of 17th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., Eshaghi M., and Rokni Damavandi H., (2009) "An analytical solution for freely vibrating annular Mindlin plates coupled with piezoelectric", Proceedings of 17th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., Amini M., and Omidii H., (2009) "3-D vibration analysis of thick elliptical plates on Pasternak foundation", Proceedings of 17th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., and Rokni Damavandi H. (2009) "An analytical solution for free vibration analysis of smart FGM annular Mindlin plates", Proceeding of 8th Conference of Iranian Aerospace Society, Isfahan, Iran.
  • Hosseini Hashemi Sh., and Mohamadi M. (2009) "Investigation of increase in wing's flutter velocity via state feedback applied on pizoelectric composite operator", Proceeding of 8th Conference of Iranian Aerospace Society, Isfahan, Iran. (in persian)
  • Hosseini Hashemi Sh., (2009) "Flutter of rotatory blades in hover flight subjected to subsonic flow", Proceeding of 8th Conference of Iranian Aerospace Society, Isfahan, Iran. (in persian)
  • Aghamiri S.M.R., Hosseini Hashemi Sh., Omidi M., and Rokni Damavandi H. (2008) "Irradiation effect on the behavior of 3-D free vibrations of solid and hollow circular cylinders via p-Ritz method", Proceedings of 16th Annual International Conference on Mechanical Engineering, Kerman, Iran.
  • Hosseini Hashemi Sh., (2008) "Acoustic power and efficiency of out of plane free vibration of moderately thick annular plate", Proceedings of 16th Annual International Conference on Mechanical Engineering, Kerman, Iran. (in persian)
  • Hosseini Hashemi Sh., (2008) "Determination of the critical dynamic pressure for cantileverd rotatory plate subjected to aerodynamical supersonic flow", Proceedings of 16th Annual International Conference on Mechanical Engineering, Kerman, Iran. (in persian)
  • Hosseini Hashemi Sh., and Mohamadi M. (2008) "Calculation of flutter velocity for 3 DOF aircraft wing's model by Rayleigh-Ritz method", Proceedings of 16th Annual International Conference on Mechanical Engineering, Kerman, Iran. (in persian)
  • Mirzaie Y., Hosseini Hashemi Sh., and Khorshidi K. (2008) "Effect of Pasternak foundation on buckling force of moderately thick rectangular plate using FSDT", Proceeding of 7th Conference of Iranian Aerospace Society, Tehran, Iran. (in persian)
  • Khorshidi K., Sadeghi A., and Hosseini Hashemi Sh. (2008) "Analytical and numerical investigations of efficiency of radiated sound resulting from the free vibration of moderately thick rectangular plate", Proceeding of 7th Conference of Iranian Aerospace Society, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., Mehdipur H., and Razavi M. (2007) "Free vibrations of multi-span rectangular plates using Rayligh-Ritz method", Proceeding of the 2nd Tehran International Congress on Manufacturing Engineering (TICMF), Tehran, Iran. (in persian)
  • Hezavehi E., Shaikhzadeh S. and Hosseini Hashemi Sh. (2007) "A unique approach to wrinkle force of wrosted fabrics under different torsional strains", 5th International Conference Innovation & Modeling of Clothing Engineering Processes, Toplice, Slovenia
  • Moalamzade A., Bisadi H. and Hosseini Hashemi Sh. (2007) "Combined effect of damage geometry and crack on variations of stress intensity factor" Proceedings of 15th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh. and Khorshidi K. (2007) "Axi-symmetric vibration of Mindlin circular plates with variable thickness under different B.Cs." Proceedings of 15th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Khorshidi K. (2007) "The effect of step, ramp and sinusoidal forces on response of multi step Thimoshenko beam", Proceeding of the 2nd International operational modal analysis conference (IOMAC), Copenhagene, Denmark.
  • Hosseini Hashemi Sh. and Khorshidi K. (2007) "Buckling of moderetly thick rectangular plates using the first order shear deformation theory and Reyligh-Ritz method" Proceeding of 6th conference of Iranian Aerospace Society, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh. and Khorshidi K. (2007) "Free vibration of Mindlin triangular plates using the first order shear deformation theory and Reyligh-Ritz method" Proceeding of 6th conference of Iranian Aerospace Society, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh. and Khorshidi K. (2007) "vibrations of solid and hallow circular plates with variable thickness" Proceeding of 6th conference of Iranian Aerospace Society, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh. and Khorshidi K. (2007) "Bucking of Mindlin rectangular plates under bi-axial inplan stresses resting on Pasternak elastic fundation" Proceeding of 6th conference of Iranian Aerospace Society, Tehran, Iran. (in persian)
  • Mojabi A., Sheikhzade S. and Hosseini Hashemi Sh. (2006) " compressional creep behavior of wool hand-woven carpet (Gabeh) under different enviromental conditions" 2nd International Conference of Applied Research on Textile (CIRAT-2), Tunisia.
  • Basiri M., Sheikhzade S. and Hosseini Hashemi Sh. (2006) "Study of curling behavior of dry-relaxed cotton using neural network" 2nd International Conference of Applied Research on Textile (CIRAT-2), Tunisia.
  • Mojabi A., Sheikhzade S. and Hosseini Hashemi Sh. (2006) "A simulator apparatus to investigate storing behavior of persian hand-woven carpet under different environmental conditions" Futurotextiles International Conference, Lille, France.
  • Hosseini Hashemi Sh., Khorshidi K., and Sadeghi A. (2006) "Exact acoustical analysis of sound radiation from free vibrations of rectangular Mindlin plates"CAA Annual Conference, Holifax, Nova, Scatia.
  • Hosseini Hashemi Sh., Omidi M., and Rokni H., (2006) "3-D vibration analysis of circular and annular plates of variable thickness with different combinations of boundary conditions" Proceedings of 14th Annual International Conference on Mechanical Engineerin Isfehan, Iran.
  • Hosseini Hashemi Sh., and Khorshidi K., (2006) "Free vibration analysis of thin elliptical plates using Rayleigh-Ritz method" Proceedings of 14th Annual International Conference on Mechanical Engineering, Isfehan, Iran.
  • Hosseini Hashemi Sh., and Khorshidi K., (2005) "Forced vibration of Mindlin rectangular plates under termal and mechanical loads resting on elastical fundation" Proceedings of 13th Annual International Conference on Mechanical Engineering, Isfehan, Iran.
  • Hosseini Hashemi Sh., and Khorshidi K., (2005) "Analysis of termo-mechanical stress and strain on car cylinder head using finite element approach" Proceedings of 13th Annual International Conference on Mechanical Engineering, Isfehan, Iran.
  • Hosseini Hashemi Sh., Sepahi A., and Khorshidi K., (2005) "Free vibration analysis of thin trapzoidal plates by Rayleigh-Ritz method using polynomial function" Proceedings of 13th Annual International Conference on Mechanical Engineering, Isfehan, Iran. (in persian)
  • Hosseini Hashemi Sh., Arsanjani M., and Omidi M., (2004) "Vibrational investigation of a general triangular thin plate by using Rayleigh-Ritz energy method", Proceedings of 12th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., Ahmadifard H., and Khorshidi K., (2004) "Plasto dynamic of cylinderical shell subjected to lateral impact focusing on effect of length and strain hardening", Proceedings of 12th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., Khorshidi K., and Sarikhani M., (2004) "Vibrational analysis of car's model focusing on effects of metal sheet springs", Proceedings of 12th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., Arsanjani M., (2004) "Buckling of triangular plates under uniformly distributed load using Rayleigh-Ritz approach", Proceedings of 12th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Tehrani P., Hosseini Hashemi Sh., Khorshidi K., and Alizadenia S., (2004) "Study of stress and temperature of thermoplastic shock fields in laser surface hardening using BEM", Proceedings of 3rd International Conference on Internal Combustion Engines, Tehran, Iran.
  • Ahmadifard H., Khorshidi K., Hosseini Hashemi Sh., and Hosseini Tehrani P., (2004) "Mechanical properties of steel and aluminum structures under impact loads", 2nd Conference of Aerospace Industries Tehran, Iran. (in persian)
  • Ahmadifard H., and Hosseini Hashemi Sh., (2004) "Crack detection on uniform beams by analysis of its natural frequncies", 2nd Conference of Aerospace Industries Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Ghayemi H., (2003) "3-D free vibrational analysis of finite length hollow cylinder by using Ritz method and beam theories", Proceedings of 11th Annual International Conference on Mechanical Engineering, Mashhad, Iran. (in persian)
  • Hosseini Hashemi Sh., and Soltani P., (2003) "Investigation of effects of cavities on strength and fatigue life of car's piston by using FEM", Proceedings of 11th Annual International Conference on Mechanical Engineering, Mashhad, Iran. (in persian)
  • Hosseini Hashemi Sh., and Ahamadifard H., (2003) "Elastic instability of circular rings under uniformly external radial impact", Proceedings of 11th Annual International Conference on Mechanical Engineering, Mashhad, Iran. (in persian)
  • Hosseini Tehrani P., Hosseini Hashemi Sh., Khorshidi K., and Ahmadifard H., (2003) "Impact of wedge on rectangular plate made of materials sensetive to strain rate", 3rd Student Conference on Mechanical Engineering, Babol, Iran. (in persian)
  • Hosseini Hashemi Sh., Hosseini Tehrani P., Ahmadifard H., and Khorshidi K., (2003) "Behavior of mechanical structures under impact loads", 3rd Student Conference on Mechanical Engineering, Babol, Iran. (in persian)
  • Hosseini Hashemi Sh., and Ahamadifard H., (2002) "Behavior of plasto dynamic of circular rings under external impact load", Proceedings of 10th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Ghayemi H., (2002) "Vibrational investigation of one and two dimensional continuous systems by applying Gram-Schmidth approach in generation of orthogonal functions", Proceedings of 10th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Teymouri Faal R., (2001) "Elastic impact on thin circular plate", Proceedings of 9th Annual International Conference on Mechanical Engineering, Gilan, Iran. (in persian)
  • Hosseini Hashemi Sh., and Abhari P., (2000) "Analysis of natural modes of vibration for detection of crack on metallic plates", Proceeding of 2nd International Conference on Applied Mathematics, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Nuri M., (2000) "Torsional vibration of prolate spheroid" , Proceeding of 2nd International Conference on Applied Mathematics, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Satari M., (2000) "Study of elasto plastic impact's parameters on soft thin rectangulat plates" , Proceeding of 2nd International Conference on Applied Mathematics, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Homaie H., (2000) "Numerical solution of Galerkin equation governing vibrational behavior of toroid" , Proceeding of 2nd International Conference on Applied Mathematics, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Homaie H., (2000) "Inespection of algebraical polynomials as trial functions on study of free vibrations of beam and plates by using Rayleigh-Ritz approach" , Proceeding of 2nd International Conference on Applied Mathematics, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Teymouri Faal R., (2000) "Spheroidal vibration of thick multi-layered spherical shell interchanging heat with environment" , Proceedings of 8th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Epackchi A., (2000) "Collision and penetration of rigid spherical-nose rods in infinite compressible media", Proceedings of 8th Annual International Conference on Mechanical Engineering, Tehran, Iran. (in persian)
  • Hosseini Hashemi Sh., and Samadian Zakaria M., (1999) "Static analysis of truck's chassis with pair of differential gear by FEM", Proceedings of 7th Annual Conference on Mechanical Engineering, Zahedan, Iran. (in persian)
  • Hosseini Hashemi Sh., and Hosseini A.R., (1999) "Investigation of dynamic strain in tubes subjected to moving pressure by using thin and thick pressure vessel's theory and its application on 60 mm cannon tube", Proceedings of 7th Annual Conference on Mechanical Engineering, Zahedan, Iran. (in persian)
  • Hosseini Hashemi Sh., and Samadian Zakaria M., (1999) "Flow induced vibration in heat convertor", Proceedings of 7th Annual Conference on Mechanical Engineering, Zahedan, Iran. (in persian)
  • Hosseini Hashemi Sh., and Teymuri Fall R., (1999) "Transient vibrations due to impact on thin plates", Proceedings of 7th Annual Conference on Mechanical Engineering, Zahedan, Iran. (in persian)
  • Hosseini Hashemi Sh., (1998) "Experimental investigation of sound radiated by a dipole source undergoing a Hertzian acceleration", Proceedings of 6th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., (1998) "Sound radiated by a dipole source undergoing a Hertzian acceleration", Proceedings of 6th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh.,and Javid H., (1998) "Analysis of torsional vibration of hollow cylinder with elliptical cross section", Proceedings of 6th Annual International Conference on Mechanical Engineering, Tehran, Iran.
  • Hosseini Hashemi Sh., (1997) "Spheroidal vibrations of sphere with spherical cavity", Proceedings of 5th Annual Conference on Mechanical Engineering, Tabriz, Iran. (in persian)
  • Hosseini Hashemi Sh., (1997) "Acoustic energy due to impulsive excitation of spherical source of sound", Proceedings of 5th Annual Conference on Mechanical Engineering, Tabriz, Iran. (in persian)
  • Hosseini Hashemi Sh., (1997) "Torsional vibrations of sphere with spherical cavity", Proceedings of 5th Annual Conference on Mechanical Engineering, Tabriz, Iran. (in persian)
  • Hosseini Hashemi Sh., (1992) "Sound generated by accelerated visco elastic sphere due to collision with a metallic sphere", Proceedings of 1st Annual Conference on Mechanical Engineering, Tehran, Iran. (in persian)

 

  Jahed, Hamidreza

  • Jahed H, Farshi B And Karimi M, 2005, “Optimum Design Of Multi Layer Vessels,” To Be Presented At Asme Pvp 2005 Conference In Denver, Colorado, July 2005.
  • Jahed H, Ahmadi B And Shambouli M, 2005, “Re-Autofrettage, A Fatigue Life Enhancement Method,” Proceedings Of The 2nd Gt Conference, Oxford, England.
  • Jahed H, Farshi B And Karimi M, 2005, “Combined Autofrettage And Shrinkfit In Multi-Layer Cylinders Assembly,” Proceedings Of The 2nd Gt Conference, Oxford, England.
  • Jahed H And Varvani A., 2004, “Plasticity In Low Cycle Fatigue Analysis,” Proceedings Of The 7th International Conference On Biaxial/Multiaxial Fatigue & Fracture, Berlin, Pp 141-7.
  • Jahed H, Tajik A, Shamae K And Rad S, 2004, “Rapid Prototyping Of Starch- Based Bone Tissue Engineering Scaffolds,” International Conference On Biomedical Engineering In Kuala Lumpur, Malaysia, September 2004. Ifbme Proc. 7: 369-372.
  • Jahed H, Rezae S, 2004, “Double Swage Autofrettage Analysis Using Actual Material Unloading Behavior,” Proceedings Of The 8th International Conference Of Isme, Tarbeyat Modares University, Tehran. P 323.
  • Jahed H, Tajik A, Shamae K And Rad S, 2004, “Scaffold Rapid Prototyping,” Proceedings Of The 8th International Conference Of Isme, Tarbeyat Modares University, Tehran, P 211.
  • Jahed H, Noban M, 2004, “A Robust Method For Analysis Of Non-Proportional Loading,” Proceedings Of The 8th International Conference Of Isme, Tarbeyat Modares University, Tehran, P 87.
  • Jahed H, Hosseini M, 2004, “Gun Tubes Fatigue Life Prediction,” Proceedings Of The 8th International Conference Of Isme, Tarbeyat Modares University, Tehran, P 306.
  • Jahed H, Ghafouri R, 2004, “Residual Stress Induced By Deep Drawing On Fatigue Life Of Rim,” Proceeding Of The 2nd Conference On Material Engineering, Sharif University, P 48.
  • Jahed H, Nasr A And Eshraghi A, 2004, “Parameters Influencing Wear In Iranian State Railways,” Proceedings Of The 7th International Conference Of Rail Ways, Sharif University, P 57.
  • Jahed H, Tajik A, Shamae K And Rad S, 2004, “Solid Freeform Fabrication Of Bone Tissue Engineering Scaffolds,” 6th International Symposium On Computer Methods In Biomechanics, Madrid, Spain.
  • Jahed H, Ahmadian H, Khoshnavaz H, 2003, "Hcf Of A Turbine Rotor Blade," Proceedings Of Fourth Aero Conference In Iran, Aerospace Structures Vol., Pp 601-611.
  • Jahed H, Noban M, 2003, “Strain Field And History Of Nonproportional Loadings,” Proceedings Of Fatigue Damage 2003 Conference, Toronto, Pp 230.
  • Jahed H, Bidabadi J, 2003, "First And Second Stage Creep Analysis Of A Rotating Disc Using Time And Strain Hardening Laws," Proceedings Of Fourth Aero Conference In Iran, Aerospace Structures Vol., Pp 611-622.
  • Jahed H, Rahmani O, 2003, "Hot Forging Simulation Based On The Anand Theory Using Ansys," Proceedings Of Smei 2003 Conference, Pp. 545-553.
  • Jahed H, Hamzee M, 2002, "Thermoelastic And Modal Analysis Of Paykan Valve," Proceedings Of The Second International Conference On Internal Combustion Engines, Tehran Iran, Pp. 122-130.
  • Jahed H, Hamzee M, 2002, "Two Spring Valve Design For Paykan," Proceedings Of The Second International Conference On Internal Combustion Engines, Tehran Iran, Pp. 130-139.
  • Jahed H, Karimi M, 2002, "Deep Drawing Simulation Of A Vehicle Rim," Proceedings Of First Metal And Material Forming, Sharif University, Tehran, Iran, Pp. 3-13.
  • Jahed H, Eshraghi A, 2002, "Finite Elastoplastic Deformation Simulation Of 2-D Problems," Proceedings Of First Metal And Material Forming, Sharif University, Tehran, Iran, Pp. 25-39.
  • Farshi B, Jahed H, Mehrabian A, 2002, "Optimum Design Of Rotating Disc At High Temperatures," Proceeding Of Sixth International Conference Of Iranian Society Of Mechanical Engineers, Isme 2002, Kn University, Tehran, Iran, Vol. 4, Pp.2048-2056.
  • Jahed H, Noban M, 2002, " A Fatigue Software Interface," Proceeding Of Sixth International Conference Of Iranian Society Of Mechanical Engineers, Isme 2002, Kn University, Tehran, Iran, Vol. 4, Pp.2305-2313.
  • Jahed H, 2002, "Mechanical Engineering Educational Requirements In Iran Immediate Future," Invited Keynote Speaker, Sixth International Conference Of Iranian Society Of Mechanical Engineers, Isme 2002, Kn University, Tehran, Iran.
  • Jahed H, Ghanbari G, 2002, "Actual Unloading Curve Measurements And Its Significant In Residual Stress Predictions, Proceedings Of Gun Tube Conference, Guns And Pressure Vessels: Design, Mechanics And Materials, Keble College, Oxford, England.
  • Jahed H, Mehrabian A And Motlagh S, 2001, "Buckling Of Cylindrical Shells With Opening And Reinforced Frames," Proceedings Of First International Conference Of Iranian Aerospace Engineers, Sharif University, Tehran, Vol. 3, Pp. 1045-1057.
  • Jahed H, Shahidi Z And Shirian M, 2001, " Elasto-Plastic Analysis Using Elastic Results Of Aerospace Components," Proceedings Of First International Conference Of Iranian Aerospace Engineers, Sharif University, Tehran, Vol. 3, Pp. 985-995.
  • Moalef H, Jahed H, And Arjomand N, 2001, " Static And Dynamic Analysis Of The First Three Stages Of Toloo 4 Compressors," Proceedings Of First International Conference Of Iranian Aerospace Engineers, Sharif University, Tehran, Vol. 3, Pp. 1259-1269.
  • Jahed H., Shamsaie H., 2001, “Residual Stress In Rotating Disc With Variable Thickness At High Temperature,” Proceeding Of Fifth International Mechanical Engineering Conference Of Iranian Society Of Mechanical Engineers,Isme 2001, Guilan, Iran, Vol. 4, Pp
  • Jahed H., Joulae N., 2001, “A Method For Creep Analysis Of Rotating Discs,” Proceedings Of 6th Biaxial/Multiaxial Fatigue And Fracture, Lisbon, Portugal, Vol. 2, Pp 425-431.
  • Jahed H., Shirazi R., 2001, “Loading And Unloading Behavior Of A Thermoplastic Disc,” International Journal Of Pressure Vessel And Piping, Vol. 78, No. 9, Pp. 637-645.
  • Jahed H, Kazemkhani A, Asef A, Zamanisafa A, 2001, " Design Of A Human Hybrid Vehicle," Proceedings Of First Hybrid Vehicles Conference, Iran University Of Science & Technology, Tehran, Iran, Pp.133-143.
  • Jahed, H. & S. Sherkati, 2000, “Thermoplastic Analysis Of Inhomogeneous Rotating Disk With Variable Thickness,” Proceedings Of Fatigue 2000 Conference, Fatigue & Durability Assessment Of Materials, Components And Structures, Eds. Bache, Blakemore, Draper,
  • Jahed H, Arjomand N, 2000, "Residual Stresses In Fitted Rotating Discs," Proceedings Of 4th International Conference Of Iranian Society Of Mechanical Engineers, Isme 2000, Sharif University, Tehran, Vol. 1, Pp. 25-33.
  • Jahed, H., Lambert, S. B. And Dubey R. N., 1998, “A Stress Based Deformation Theory For Linear Nonproportional Loading,” Proceedings Of Six Annual Conference Of Iranian Society Of Mechanical Engineers, Vol. 4, Pp 287- 293.
  • Jahed, H., 1998, “Autofrettage,” Proceedings Of Third International Conference Of Mechanical Engineering, Iust, Tehran, Vol. 4, Pp. 361-369.
  • R. N. Dubey, H. Jahed And A. Kumar, 1997, “A Technique For Solving Nonlinear Problems,” Ans Symposium, Trends In Structural Mechanics, Eds. J. Rorda & N. K. Srivastava, Pp. 15-21, Waterloo, Canada.
  • Jahed, H., Sethuraman, R., And Dubey R. N., 1996, “Variable Material Properties Approach In Elastic-Plastic Solution Of Thick-Walled Cylinders,” Mechanics In Design, Ed. S. A. Meguid, Toronto, Pp. 187-197.
  • Jahed, H., And Dubey R. N., 1996, “Residual Stresses Calculation In Autofrettage Using Variable Material Properties Method,” Asme Pvp-Vol 327, Residual Stress In Design, Fabrication, Assessment And Repair, Pp. 181-188
  • Jahed, H., And Dubey R. N., 1996, “A Consistent Inelastic Formulation Analogous To Elastic Problems With Variable Coefficients,” Asme Pvp-Vol 343, Development Validation, And Application Of Inelastic Methods For Structural Analysis And Design, Pp. 215-223
  • Jahed, H., 1992, “A Way Of Defining Overall Moduli In Orthotropic Materials,” Proceeding Of The First Annual Conference Of Iranian Society Of Mechanical Engineers (Isme), P. 49.

 

  Madoliat, Reza

  • R. Madoliat, R. Narimani And H. Rahrovan, "Investigation Of Sheet Metal Forming Using Rubber Pad Forming.
  • R. Madoliat, A. Milani And R. Taymori, "A New Procedure For The Balancing Of Dynamic Forces Transferred To The Base By A Selected Mechanism., Isme 98.
  • R. Madoliat, A. Milani And R.Taymori, "Analysis Of Impact Of Reflected Moment Of Inertia On Vehicle`S Overdrive., Isme 98.
  • R. Madoliat And R. Abedi, "Time Step Criteria For Time Dependent Heat Conduction Problems By Using Fem., Isme 98.
  • F. Djavanroodi, R. Madoliat, P.Koochebaghi,"Prediction Of Cold Rolling Force In 1100 Aluminium Sheet Using Artificial Neural Networks., Timce 2007.
  • R. Narimani, R. Madoliat, M. Hosseinzadeh,"A Comparison Between Dry And Conventional Finish Turning Process Of 7075 Aluminum Alloy., Timce 2007.
  • R. Madoliat, F. Jafarvand, V. Ehtemam, "Comparison Of Different Training On Performance Of A Feed Forward Neural Network For Prediction Of Surface Roughness., Timce 2007.
  • R. Madoliat, S. Hayati, H. Rokni D.T., "Chatter Control In Turning Process Using Fuzzy Model Based Controller And Energy Dissipater Actuator.,Timce 2007.
  • R. Madoliat, S. Hayati, Rokni D.T., "Robust Control For Regenerative Chatter Suppression Via H∞ Approach Using µ-Analysis And µ-Synthesis., Timce 2007.
  • S. M. Hasheminejad, R. Madoliat, S. Hayati, B. Rahmani, "Analysis Of Self-Excited Stick-Slip Oscillations Of Drill Bits Using Multiple Scale Method.,Timce 2007.
  • R. Madoliat, O. Zarei, P. M. Kashtiban, "Optimization Of Multi-Pass-Milling Using Generic Algorithm Harmony Search Algorithm., Timce 2007.
  • N. M. Noori, R. Madoliat, I. Maleki, A. Shienejad, "Process Optimization In Deep Drilling., Timce 2007.
  • N. M. Noori, R. Madoliat, I. Maleki, A. Shienejad, "A Two Degree Freedom Model For Simulating Chatter Vibration In Drilling., Timce 2007.
  • N. M. Nouri, R. Madooliat, I. Maleki, A. Shie Nejad And M. Mansouri, "Time Domain Simulation Of Chatter Vibration In Drilling., Cadme 2007.
  • N. M. Nouri, R. Madooliat, I. Maleki, A. Shie Nejad And M. Mansouri, "Optimizing Process Time In Deep Drilling., Cadme2007.

 

  Montazeri, Morteza

  • Recent Conference Publications Will Be Presented In Near Future
  • Montazeri-Gh And M. Asadi (2006), "Influence Of The Road Grade On The Optimization Of Fuzzy-Based Hybrid Electric Vehicle Control Strategy", Sae 2006-01-3293
  • Poursamad A. And M. Montazeri-Gh. (2006); “Powerflow Management In Hybrid Electric Vehicles Using Genetic-Fuzzy Control System" Avec 2006, Taipei, Taiwan
  • Montazeri-Gh M. And M. Soleimani (2006); “Simultaneous Simulation Of Hybrid Electric Vehicle Powertrain And Active Suspension Systems For Energy Study” Avec 2006, Taipei, Taiwan
  • Montazeri-Gh M., H. Varasteh And M. Naghizadeh (2005); “Driving Cycle Simulation For Heavy Duty Engine Emission Evaluation And Testing” Sae 2005-1-3796, Powertrain And Fluid Systems Conference And Exhibition, October 2005, San Antonio, Texas, Usa
  • Montazeri-Gh M. And A. Poursamad (2005); “Optimization Of Component Sizes In Parallel Hybrid Electric Vehicles Via Genetic Algorithms” Asme 2005, International Mechanical Engineering Congress & Exposition, Orlando, Usa
  • Montazeri-Gh M., A. Poursamad And B. Ghalichi (2005); “Application Of Ga For Optimization Of Parallel Hev Control Strategy” Proceedings Of The Icmsao 2005, February 2005, Sharjah, Uea
  • B. Ghalichi, M. Montazeri-Gh And A. Poursamad (2005); “Fuzzy-Based Parallel Hev” Proceedings Of The Icmsao 2005, February 2005, Sharjah, Uea
  • Montazeri-Gh M. And A. Poursamad (2005); “Application Of Ga For Optimization Of The Hev Sizing” Isme 2005, May 2005, Isfahan, Iran
  • Montazeri-Gh M. And B. Ghalichi (2004); “Fuel Conservation Optimization In Hev”, Proceedings Of The First Conference On Fuel Conservation In Transportation, October 2004, Tehran
  • Montazeri-Gh M. And M. Naghizadeh (2004); “Development Of The First Tehran Urban Cycle (Teh_Car)” Proceedings Of The First Conference On Fuel Conservation In Transportation, October 2004, Tehran
  • Montazeri-Gh M. And M. Safarabadi-F (2004); “Application Of Fuzzy Logic In The Design Of Turbojet Engine Fuel Control System, 5th Iranian Conference In Fuzzy Systems, September 2004
  • Montazeri-Gh M… Et. Al. (2004); “Comparative Analysis Between 7dof Model And Car Full Model Simulated In Adams” , Isme2004, Tehran
  • Montazeri-Gh M. And M. Safarabadi-F (2004); “Fuzzy-Based Gas Turbine Fuel Control System”, Cdic04, August 2004, China
  • Montazeri-Gh, M. And Hamzehpoor, T. (2004); “Effects Of Electro-Hydraulic Fuel Control System On The Turbojet Engine Performance“ 5th Iranian Aerospace Conference (Aero 2004), Isfahan, January 2004
  • Montazeri-Gh, M. And Hasani, M. (2003); “Parallel Hybrid Electric Vehicle Control Strategy Design Using Fuzzy Logic“ Proceedings Of 11th International Isme Conference, Pp. 1852-1861, Mashhad, Iran, June 2003
  • Montazeri-Gh, M., Kazemi And Behzadi (2003); “Modeling And Simulation Of The Effect Of Izy On The Fuzzy-Based Active Suspension System” Proceedings Of 11th International Isme Conference, Pp. 1965-1972, Mashhad, Iran, June 2003
  • Montazeri-Gh, M., Rostami, Agharazi (2003); “Mahsan Brake System Analysis For Hybridization“ Proceedings Of 11th International Isme Conference, Pp. 187-194, Mashhad, Iran, June 2003
  • Montazeri-Gh, M., Hasani, M. (2003); “Hybrid Electric Vehicle Control From Mechateronics Viewpoint“ First Iranian Mechatronics Engineering Conference, June 2003, Ghazvin
  • Montazeri-Gh, M. And Biravand, B. (2003); “Hybrid Electric Vehicle Components Sizing“ First Iranian Mechatronics Engineering Conference, June 2003, Ghazvin
  • Montazeri-Gh, M. And Hamzehpoor, T. (2003); “Simulation Of Turbojet Electro-Hydraulic Fuel Control System For Sensitivity Analysis Of Parts Manufacturing“ Sixth Manufacturing Engineering Conference, December 2003, Tehran
  • Montazeri-Gh M. And M. Naghizadeh (2003); “Development Of Car Drive Cycle For Simulation Of Emissions And Fuel Economy”, Ess2003, Delft, Netherlands, October 2003
  • Montazeri-Gh M. And M. Kashani-Azad (2002); “Energy Regeneration Of Active Suspension System In Hybrid Electric Vehicle” Avec 2002, Japan, September 2002
  • Montazeri-Gh M. And S. Mojallaj-A (2002); “Modeling And Simulation Of Gas Turbine Performance”, Mesm2002, Sharje, September 2002
  • Montazeri-Gh, M., M. Soleymani, And H. Rahrovan (2002); “Vehicle Ride Evaluation Using Combined Body Motions” Proceedings Of 10th Isme International Conference, June 2002, Tehran
  • Montazeri-Gh, M. And Kazemkhani A. (2002); “Simulation Of Minibus Performance For Hybridization”, Proceedings Of 10th Isme International Conference, June 2002, Tehran
  • Montazeri-Gh, M. And Biravand, B. (2002); “Parallel Hev Control Strategy”, Proceedings Of 10th Isme International Conference, June 2002, Tehran
  • Montazeri-Gh, M. And S. Mojallaj-A. (2002); “Modeling And Simulation Of Turbojet Engine Fuel Control System”, Proceedings Of Aerospace Conference (Aero2002), Tehran
  • Montazeri-Gh, M. And A. Nazari (2002); “Electro-Hydraulic System For Gt Thrust Throttling” Proceedings Of The 5th Manufacturing Engineering Conference, Pp. 321-331, February 2002, Tehran
  • Montazeri-Gh, M., Hasani, M. (2002); “Hybrid Electric Vehicle Control Strategy Design“ Isme Student Conference, 2002
  • Montazeri-Gh M. And M. Kashani-Azad (2001); “Simulation Of Fuzzy-Based Active Suspension System” Ess 2001, France, October 2001
  • M. Kashani Azad, M. Montazeri-Gh (2001); “Active And Passive Car Suspension Systems”, Iran Society Of Mechanical Engineers Magazine, Spring
  • M. Montazeri-Gh And M. Kashani Azad (2001); “Fuzzy Control Of Intelligent Suspension Systems”, 9th Isme National Conference, Gilan University, Iran
  • M. Montazeri-Gh And M. Kashani Azad (2001); “Application Of Active Suspension Systems In The Hybrid Electric Vehicles”, Proceedings Of The First Symposium On Hybrid Vehicles, August 2003, Iust, Tehran
  • M. Montazeri-Gh And A. Kazemkhani (2001); “Hybrid Electric Vehicle Performance”, Proceedings Of The First Symposium On Hybrid Vehicles, August 2003, Iust, Tehran
  • Montazeri-Gh. M. And M. Feiz (2000); ” Turbojet Control System Simulation”; The 4th International Isme Conference, Sharif University Of Technology, Tehran, April 2000
  • Montazeri-Gh. M. And M.Rasouli (2000);”Modelling And Simulation Of Vehicle Dynamic Performance” The 4th International Isme Conference, Sharif University Of Technology, Tehran, April 2000
  • Montazeri-Gh, M. And D. Sanadgol (2000); “Application Of Eigenvalue Analysis For Compressor Surge Prediction”, International Conference In Applied Mathematics (Icam) 2000, Tehran
  • Montazeri-Gh. M. And D. Sanadgol (2000); “Sensor Placement For Active Control Of Surge In Multi-Stage Axial Compressors” Aero 2000, Sharif University Of Technology, Tehran, Iran
  • Sedighi, Montazeri-Gh, And Khoshmaram (2000); “Application Of Cad/Cam In The Design And Manufacturing Of Axial Compressor Blades”, Proceedings Of Aero 2000, Sharif University Of Technology, Tehran, Iran
  • Montazeri-Gh. M. And P. Saedi (1999); ”The Effect Of Compressor Extra Chamber On The Surge Inception” Proceeding Of The 7th Annual Isme Conference, Zahedan, April, 1999
  • Montazeri-Gh. M. And B. Elhami (1999); “Simulation Of Turbojet Transient Performance”; Proceeding Of The 7th Annual Isme Conference, Zahedan, April, 1999
  • Rahmani A And M. Montazeri-Gh. (1999); ”Application Of Fuzzy Logic In Active Suspension System“ Proceeding Of The 7th Annual Isme Conference, Zahedan, April, 1999
  • Montazeri-Gh. M. (1998);”The Effects Of Actuator Characteristics On Active Control Of Surge”, Proceeding Of The 3th International Isme Conference, Tehran, 1998
  • Montazeri-Gh. M. (1998); ”Actuator Failure Investigation For Active Control Of Surge” Proceeding Of The Second Iranian Conference On Aerospace Engineering, Isfahan, 1998
  • Montazeri-Gh. M., D. J. Allerton And E.L. Elder(1996);”Actuatore Placement For The Active Control Of Surge In A Multi-Stage Axial Compressor”, Turbo Expo Asme-96, Birmingham, Uk, June 1996
  • Montazeri-Gh. M., D.J.Allerton And E.L.Elder(1996);”Active Control Of Surge In An Aircraft Compressor”, Ukacc International Conference On Control 96, Exeter, Uk, 1996
  • Montazeri-Gh. M., D. J. Allerton And E. L. Elder(1994); ”Simulation Of Nonlinear One-Dimensional Modeling For Surge Prediction With The Application Of Active Surge Control”, Ess94, European Simulation Symposium, October 1994,Vol 2, Pp.191-195

  Navidbakhsh, Mehdi

  • A.Tanbakoosaz, M.Navidbakhsh, " Influence of stent geometric traits on blood flow hydrodynamic parameters" 14th Iraninan Conference on Biomedical Engineering (ICBME2007)
  • M.Abdolrazaghi, M.Navidbakhsh, K.Hassani," Thoracic Aortic Aneurysm Modeling " 14th Iraninan Conference on Biomedical Engineering (ICBME2007)
  • M.H.Korayem, M.Navidbakhsh, Y.Habibyar, M.Hashemi," Artificial Human Gait Generation with Robotic Multi-Segment Model" 14th Iraninan Conference on Biomedical Engineering (ICBME2007)
  • S.Sadeghian, M.Navidbakhsh,R.Molae," Numerical flow analysis in actual model of human coronary" 3rd WSEAS inter. Conf. appl. and theo. mech.,spain(2007)
  • Z.Rahmdel, M.Navidbakhsh , M.Khalilian," Analysis of Non-Newtonian Blood Flow Through Arteries With Double Symmetric Stenosis "(In Farsi) The 14th Annual (international) conference of Mechanical Engineering, Tehran-Iran(2006)
  • M.Navidbakhsh, H.M.Vafa,"Diagnosis of ST-elevation according to wavelet and nervous system"The 12th ICBME2005,Singapore,(2005)
  • Z.Asgharpour, M.Navidbakhsh,"Simulation of valvular heart disease in combination of two cases including stenosis and insufficiency"The 12th ICBME2005,Singapore,(2005)
  • Z.Asgharpour, M.Navidbakhsh,"Effects of exercise on circulation with the heart rate fixed"The 12th ICBME2005,Singapore,(2005)
  • M.Navidbakhsh, E.Khormali,"Blood-flow study in systemic pulmonary shunt:application of non-newtonian model"14th IASTED Applied Simulation and Modelling,(2005)
  • M.Navidbakhsh,M.R.Naghavi,"Non-Newtonian behavior of blood flow in 3d-simulated model of carotid artery bifurcation"14th IASTED Applied Simulation and Modelling,(2005)
  • M.Navidbakhsh, M.R.Naghavi," Study on carotid artery bifurcation lesions, using CFD"11th Iraninan Conference on Biomedical Engineering (ICBME2004)
  • M.Navidbakhsh, A.Haddadzadeh "Mathematical modeling of electrolytes exchange across the cell membrane during dialysis"(In Farsi) The 10th Annual (international) conference of Mechanical Engineering(2002)
  • S.Najarian,M.Navidbakhsh,P.Taghva," Design of a ultrafilteration control system for hemodialysis machine"(In Farsi) 9th Iraninan Conference on Biomedical Engineering(ICBME2002)
  • M.Navidbakhsh,M.R.Naghavi,B.Firoozabadi," Settling velocity of spherical particles in capillaries" ICBME2002, Singapore(2002)
  • M.Navidbakhsh,K.Hassani," Hydrodynamic simulation of cardiovascular system and flow analysis in system elements by finite element method" EMBEC'02, Vienna-Austria (2002)
  • M.N varag, M.Navidbakhsh ,"Simulation of the cardiovascular system and study of pressure-volume variation "(In Farsi) 10th Iraninan Conference on Biomedical Engineering (ICBME2001)
  • M.Navidbakhsh ,A,Bagherieh,"Modeling of the McKibben artificial muscle by describing the antagonist working principles"(In Farsi) 10th Iraninan Conference on Biomedical Engineering (ICBME2001)
  • M.Navidbakhsh ,A.Arefmanesh,M.Norooz zadeh,H.R.Moghadam, M,"3-D modeling of keratoplasty by finite element method "(In Farsi) 9th Iraninan Conference on Biomedical Engineering (ICBME2000)
  • M.Navidbakhsh ,N.moazeni,"Heat exchange modeling of the oxygenator by finite element method"(In Farsi) 9th Iraninan Conference on Biomedical Engineering (ICBME2000)
  • M.Navidbakhsh,F.Farzad," Determination and monitoring patient respiratory parameters in ventilator system"(In Farsi) 9th Iraninan Conference on Biomedical Engineering (ICBME2000)
  • M.Navidbakhsh,X.Wang, N.Lucius, J.F.Stoltz," Ecoulement permanent dans un aneurisme axisymetrique: importance des proprietes non-newtoniennes du sang"(In French) XXIeme Congres de la Societe de Biomecanique(1996)

  Riahi, Mohammad

  • Riahi,M., Akbarimousavi, A.A.S., Haghparast, A. "Simulation Of Underwater Explosive Forming Of Dome Shaped Sheets And Investigating The Effects Of Stand-Off Distance", International Conference On Metal Forming, University Of Tehran, April 2006, Tehran, Ir
  • Riahi, M., Gholizadeh, H. Fault Detection Of Simulated Servo Hydraulic System By Utilizing Artificial Neural Network (Ann) , 19th International Conference On Hydraulics And Pneumatics, Prag,Check Republic, May 30-31, 2006
  • Riahi, M. Mousavi, A. A. , Haghparast, A. "Simulation Of Explosive Forming Of Deep Drawing Of Thin Sheets", International Conference On Metal Forming, University Of Tehran, April 2006, Tehran, Iran
  • Riah, M. Ghasemi, H. "Failure Analysis Of A Centrifugal Pump By Investigating Mechanical Seal Performance Via Fem, First National Conference On Condition Monitoring, Shareef University Of Technology, Tehran, Iran, March, 2007
  • Riahi, M. Memari, M. Utilization Of Infrared Thermograph Methods For The Study Of Generated Heat In Work Place Under Lathe Process And Detection Of Effective Maximum Heat Generated" 2006 Asnt Digital Imaging Ix Conference At Foxwoods Resort, Connecticut,
  • Riahi, M. & Abdi, M, Residual Stress Analysis Of Structural Steel Parts Via Utilization Of Acoustic Emission (Ae) Testing Method, 14th International Mechanical Engineering Conference, Esfehaun, Iran, April, 2006
  • Riahi, M. And Abdy, M. “Application Of Acoustic Emission Method For The Estimation Of Bearing Wear”, Proceedings Of American Society For Nondestructive Testing, Fall Conference, October, 2005, Columbus, Ohio, Usa.
  • Riahi, M. And Khosrowzadeh, B. “Development Of Acoustic Emission (Ae) Method For The Diagnosis Of Corrosion In Steel Pipes”, Proceedings Of American Society For Nondestructive Testing, Fall Conference, October, 2005, Columbus, Ohio, Usa.
  • Riahi, M. And Abolhasany, M.R. “Utilization Of Time Of Flight Diffraction (Tofd) For In-Service Inspection Of Pressure Vessels”, Proceedings Of American Society For Nondestructive Testing, Fall Conference, October, 2005, Columbus, Ohio, Usa.
  • Riahi, M. And Zarrabian, A.R. “Development Of An Integrated Software System For The Design Of Hollow Extrusion Dies Of Single Pocket Sections”, Proceedings Of The 13th International Mechanical Engineering Conference, May, 2005, Esfehawn, Iran.
  • Riahi, M. And Ansarifard, M. “Prediction Of Ball Bearing Life Estimation Via Practical Equation Based On Effective Parameters”, Proceedings Of The 13th International Mechanical Engineering Conference, May, 2005, Esfehawn, Iran.
  • Riahi, M. And Gholizadeh, H. “Fault Detection Of Simulated Servo-Hydraulic System By Utilizing Artificial Neural Network (Ann)”, Proceedings Of The 13th International Mechanical Engineering Conference, May, 2005, Esfehawn, Iran.
  • Riahi, M. And Bayklar, M.Y. “Health Monitoring Of Electrofusion Weldment Of Polymeric Piping System”, Proceedings Of 3rd Maintenance Engineering Conference, Tehran, Iran, August, 2005.
  • Riahi, M. “Condition Monitoring In Continous Productin Processing”, Proceedings Of 12th International Mechanical Engineering Conference, April, 2004, Tehran, Iran.
  • Riahi, M. And Zarrabian, A.R. “Automated Die Design For Extrusion Processing Of Aluminum”, 2nd International Conference On Aluminum, December, 2004, Tehran, Iran.
  • Riahi, M. And Sharafy, M. “Optimized Maintenance Of A Passenger Helicopter By Preventive Replacement Of Parts”, Proceedings Of 5th International Aerospace Engineering Conference, February, 2004, Tehran, Iran.
  • Riahi, M. And Barooj, B. “Design Analysis And Software Development Of Preventive Mechanized Maintenance Engineering System”, Proceedings Of 2nd National Maintenance Engineering Conference, July, 2003, Tehran, Iran.
  • Riahi, M. And Alimardany, M.A. “Review Of System Engineering In The Maintenance Of Heavy Machinery”, Proceedings Of 2nd National Maintenance Engineering Conference, July, 2003, Tehran, Iran.
  • Riahi, M. And Moghaddam, M.A. “Applications And Review Of Shot Peening Process In Mechanical Parts”, Proceedings Of 11th International Mechanical Engineering Conference,May, 2003, Mashhad, Iran.
  • Riahi, M. And Dehghanpour, M. “Design Of Antilock Brake Syatem By Fuzzy Logic”, Proceedings Of 11th International Mechanical Engineering Conference, May, 2003, Mashhad, Iran.
  • Riahi, M. And Aslanimanesh, M. “Reliability Growth Inmechanical Parts And Its Estimate”, Proceedings Of 11th International Mechanical Engineering Conference, May, 2003, Mashhad, Iran.
  • Riahi, M. And Khateeb, A. “Failure Analysis Of Knuckles In The Suspension System Of Passenger Cars”, Proceedings Of 5th Manufacturing Engineering Conference, February, 2003, Tehran, Iran.
  • Riahi, M. And Charehkhawh, S. “Production Of Passenger Car’s Flywheel By Reverse Engineering Method And Utilization Of Governing Equations”, Proceedings Of 5th Manufacturing Engineering Conference,February, 2003, Tehran, Iran.
  • Riahi, M. “Applying Modern Engineering Concepts In The Maintenance Of Diesel Engines”, Proceedings Of 9th International Mechanical Engineering Conference, May,2003, Rasht, Iran.
  • Riahi, M. “Crack Inspection Of Sour Gas Pipelines Via Conventional Ndt Methods”, Proceedings Of American Society For Nondestructive Testing, Fall Conference, November, 2002, San Diego, California, Usa.
  • Riahi, M. “Reliability Determination Of Magnetic Particles”, Proceedings Of American Society For Nondestructive Testing, Fall Conference, November, 2002, San Diego, California, Usa.
  • Riahi, M. And Habiby, H. “Comparison Analysis Of Three Commuter Jetliners From Maintenance Stand Point", Proceedings Of First Aerospace Engineering Conference, December, 2001, Tehran, Iran.
  • Riahi, M. “Identifying And Evaluating Effective Parameters In Scholastic Teachings In Engineering Schools And Professional Research”, Proceedings Of National Re-Organization Of Research Conference For The Third National Development Plan, November, 2001, T
  • Riahi, M. “Fatigue Life Determination In The Blade Of A Gas Turbine Via Ndt”, Proceedings Of American Society For Nondestructive Testing, Fall Conference, October, 2001, Columbus, Ohio,Usa.
  • Riahi, M. “Predictive Models For The Determination Of Pitting Corrosion In Steel Pipes”, Proceedings Of American Society For Nondestructive Testing, Fall Conference, October, 2001, Columbus, Ohio, Usa.
  • Riahi, M. “Role Of Ndt In Condition Monitoring”, Proceedings Of American Society For Nondestructive Testing Fall Conference, October, 2001, Columbus, Ohio, Usa.
  • Riahi, M. And Aslanimanesh, M. “Estimation Of Reliability Determination In Cracked Specimen Under Fatigue Failure”, Proceedings Of 55th Machinery Failure Prevention Technology Conference (Mfpt), April, 2000, Virginia Beach, Virginia, Usa.
  • Riahi, M. And Zarrabian< A.R. “Condition Monitoring Of Storage Tanks By Acoustic Emission”, Proceedings Of National Conference On Condition Monitoring, March, 2000, Khorasan, Iran.

 

  Sanaye, Sepehr

  • Sepehr Sanaye, Omid Hamidkhani, "Thermoeconomic Optimization Of Heat Recovery Steam Generators", Gt2007-28297, Asme International Gas Turbine Conference, 2007
  • Sepehr Sanaye, Mehdi Darvishi, "Thermodynamic Modeling Of Gas Turbine Blade Cooling", Gt2007-28298, Asme International Gas Turbine Conference, 2007.
  • Sepehr Sanaye, Masoud Mostakhdemi, Hossein Babaie Toski, "Thermoeconomic Optimization Of An Ice Thermal Storage System", Gt2007-28295, Asme International Gas Turbine Conference, 2007
  • Sepehr Sanaye, Maziar Ghazinejad, "Thermoeconomic Optimization Of Gas Turbine Combined Heat And Power System In A Paper Mill", Gt2007-27206, Asme International Gas Turbine Conference, 2007
  • Sepehr Sanaye, Mehdi Aghaee Meibodi, Shahabeddin Shokrollahi, "Number And Nominal Power Of Prime Movers In Combined Heat And Power Systems", Gt2006-90724, Asme International Gas Turbine Conference, 2006
  • Sepehr Sanaye, Moein Rezazadeh, "Thermal Modeling Of Hrsg Transient Behavior In Combined Cycle Power Plants", Gt2006-90718, Asme International Gas Turbine Conference, 2006
  • Sepehr Sanaye, Hossein Rezazadeh, Mehrdad Aghazeynali, "Effects Of Inlet Fogging And Wet Compression On Gas Turbine Performance", Gt2006-90719, Asme International Gas Turbine Conference, 2006.
  • Sepehr Sanaye,Younes Hamzeie, "Thermal And Economic Analysis Of Besat Steam Power Plant Repowering", Gt2006-90720, Asme International Gas Turbine Conference, 2006
  • Sepehr Sanaye, Vahid Mahdikhani, "Thermal And Economic Analysis Of Gas Turbine Steam Injection Plant", Gt2006-90721, Asme International Gas Turbine Conference, 2006
  • Sepehr Sanaye, Omid Hamidkhani, " Thermal And Economic Evaluation Of Heat Recovery Steam Generators (Hrsg)", 18th International Conference On Efficiency, Cost, Optimization, Simulation, And Environment Impact Of Energy Systems, Ecos-2005.
  • Sepehr Sanaye, Abbasali Fardad, Hossein Babaie Touski, " Thermal And Economic Evaluation Of An Ice Thermal Storage System", 18th International Conference On Efficiency, Cost, Optimization, Simulation, And Environment Impact Of Energy Systems, Ecos-2005.
  • Sepehr Sanaye, Abbasali Fardad, Mohsen Ebrahimi, " Thermo-Economic Evaluation Of Evaporative Inlet Cooling Methods For Ray Gas Turbine Power Plant", Gt- 2004- 53717, Asme International Gas Turbine Conference, 2004.
  • Sepehr Sanaye, Shahabeddin Shokrollahi, " Selection And Sizing Of Prime Movers In Combined Heat And Power Systems", Gt- 2004- 53715, Asme International Gas Turbine Conference, 2004.
  • Sepehr Sanaye, Behrooz Farshi, Hashem Tork, " Optimum Turbine Extraction Pressures For Maximum Efficiency In Steam Power Plant Cycle", Ijpgc2003-40205, Asme International Joint Power Generation Conference, 2003
  • Sepehr Sanaye, Arash Moradi, Farid Bashiri, Amir Saeed Dashti, Daryoush Mehranian, Mansoor Mehrara, " Performance Assessment Of A Transient Model For Hrsgs In Combined Cycle Power Plants", Gt- 2003- 38810, Asme International Gas Turbine Conference, 2003.
  • Sepehr Sanaye, Arash Moradi, Farid Bashiri, Abbas Mohajerani, " Gas Turbine Modeling With Air Bleeding Effects", International Power System Conference, Psc- 2002.
  • Sepehr Sanaye, Arash Moradi, "Development Of A New Simulation Program For Combined Cycle System", Gt- 2002- 30467, Asme International Gas Turbine Conference, 2002.
  • Sepehr Sanaye, Parvis Shirvani, "Feasibility Assessment Of Energy Savings In Methanol Production Plant Using The Pinch Method", Iasted International Conference On Power & Energy Systems, Pes-2001.
  • Sepehr Sanaye, Parviz Shirvani, "Thermal Analysis Of Steam Power Plant Cycles Using The Pinch Method", Iasted International Conference On Power & Energy Systems, Pes-2001.
  • Sepehr Sanaye, Majid Vahedi, "Deposition And Propagation Of Particles In Turbulent Flow Over Flat Surfaces", The 9 Th International Mechanical Engineeing Conference – Isme-2001.
  • Sepehr Sanaye, Saied Naraghi, "Finding The Optimum Reheat And Extraction Pressures For Maximum Steam Cycle Efficiency Using Mathematical Relations", Iasted International Conference On Power & Energy Systems, Pes-2000.
  • Sepehr Sanaye, "Measurement Of Shape, Size And Concentration Of Particles Or Bubbles In Multiphase Flows Using Image Analysis Techniques", The 6th International Mechanical Engineering Conference, Isme- 1998.
  • Sepehr Sanaye, "Error Analysis Of Velocity Measurement In Particle Image Velocimetry", The 6 Th Intermational Mechanical Engineering Conference, Isme- 1998

  Malakzadeh, Mohammad

  • Mardanbeigi, D., Mallakzadeh, M., 2010 “Design, and manufacturing of an eye-tracker with imaging method,” Conference of Electronic Health and ICT Application in Iran Medical, February 24, Free Islamic University- Sciences and Researches Unit, School of Biomedical Engineering, Tehran, Iran, pp. 29.
  • Atefi, E., Mallakzadeh, M., 2010 “Studying the optimum conditions of implantation of a dental implant via stress analysis in maxillary tissue around the implant using the design and analysis engineering softwares,” Conference of Electronic Health and ICT Application in Iran Medical, February 24, Free Islamic University- Sciences and Researches Unit, School of Biomedical Engineering, Tehran, Iran, pp. 36.
  • Atefi, E., Mallakzadeh, M., Sababi, F., 2010 “Sensitivity analysis and determining the stress distribution in maxillary tissue due to orthodontic loading using engineering softwares,” Conference of Electronic Health and ICT Application in Iran Medical, February 24, Free Islamic University- Sciences and Researches Unit, School of Biomedical Engineering, Tehran, Iran, pp. 34.
  • Mardanbeigi, D., Mallakzadeh, M., 2009 “Design and fabrication of an eye- tracker to assist disable persons to communicate with computer,” 15th Iranian Conference on Biomedical Engineering, January 2930, Free Islamic University- Mashhad branch, Mashhad, Iran, pp. 602608.
  • Mardanbeigi, D., Mallakzadeh, M., 2009 “Evaluation of an eye-tracker to assist quadriplegic disable persons to communicate with computer,” 16th Iranian Conference on Biomedical Engineering, December 2930, Tehran Medical University, Tehran, Iran, pp. 38.
  • Atefi, E., Mallakzadeh, M., 2009 “Sensitivity Analysis of length and diameter of a dental implant with respect to stress distribution on the adjacent maxillary bone tissue using FEM and a three dimensional model of the implant in the maxilla and determining the optimum region for the design,” 16th Iranian Conference on Biomedical Engineering, December 2930, Medical University of Tehran, Tehran, Iran, pp. 12.
  • Mallakzadeh, M., Sassani, F., Sawatzky, B.J., August 2007 “Effect of Linear Wheelchair Velocity on a New Manual Wheelchair User Joint Injury Index,” American Society of Biomechanics (ASB) Annual Conference (International). Poster Presentation, Stanford University, USA, Number of the pages:2.
  • Mallakzadeh, M., Sassani, F., Oxland, T., October 2005, “Development of an instrumented wheel for three-dimensional analysis of manual wheelchair propulsion dynamics,” Proceedings of International Symposium on Collaborative Research in Applied Science (ISOCRIAS), Vancouver, Canada, pp. 2229.
  • Mallakzadeh, M., Sassani, F., Oxland, T., 2004, “Biomedical Analysis of Manual Wheelchair Propulsion,” Advance System Institute (ASI) of BC, Poster Presentation, pp. 125.
  • Mallakzadeh, M., Mirnajafizadeh, S.A., and Haghpanahi, M., 2002, “Analysis of upper extremity during wheelchair propulsion by optimization techniques,” 9th Iranian Conference on Biomedical Engineering, February 29 March 2, Iran University of Science and Technology, Tehran, Iran.
  • Shirazi, A.R., Nazari, B., Haghpanahi, M., Mallakzadeh, M., 2002, “Biomechanical Analysis of Long Jump for Men Athletes,” 9th Iranian Conference on Biomedical Engineering, February 29 March 2, Iran University of Science and Technology, Tehran, Iran.
  • Haghpanahi, M., Mallakzadeh, M. Riazi, A., 2001, “Determining the muscle forces during wheelchair propulsion for six important for six important muscle of the upper extremities and comparing the results with E.M.G. values,” VIII International Symposium on Computer Simulation in Biomechanics, Milan, Italy, pp.145149.
  • Mallakzadeh, M., Haghpanahi, M., 1998, “Biomechanical Analysis of Knee joint,” First Scientific Biomechanical Congress of Iran, April 2122, Welfare Sciences & Rehabilitation University, Tehran, Iran.
  • Mallakzadeh, M., and Haghpanahi, M., 1997, “Normal Gait Analysis for Young Iranian,” 3rd Congress on Technical Orthopedics of Iran, February 1718, Welfare Sciences & Rehabilitation University, Tehran, Iran.
  • Haghpanahi, M., Firoozbakhsh, J. and Mallakzadeh, M., 1996, “Three dimensional analysis of the trunk and upper extremity during wheelchair propulsion with considering the effect of muscle forces,” 14th International Symposium on Biomechanics in Sports, June 2529, Funchal, Portugal, pp. 565568.

 

  Mirahmadi, Amin

 

  • Manufacturing Time Optimization In Additive And Removal Methods By Acs Approch-- Rapid Prototyping Conference--Portugal-- A.Mirahmadi,S.Sadoddin,J.Shanjani--2006
  • A New Rapid Prototyping Method Based On Metal Powder Sintering--- International Conference On Advanced Research-- A. Mirahmadi, S. Saedodin , J. Shanjani--Portugal September 2007
  • Super_Saturation Drowing-Out Coating Of Metal Particles For Usage In Layered Manufacturing Processes--International Conference On Advanced Research-- A. Mirahmadi, S. Saedoddin, J. Shanjani -- Portugal, September 2007
  • Multi Line Projection 3d Part Scanner-- International Conference Of The Society Of Manufacturing Engineers--Iran--A.Mirahmadi, A. Farshchian, H. Khadivi--2003
  • Design And Measurement With 3d Laser Diode Line Scanner, 13th Annual (International) Conference On Mechanical Engineering--Iran-- A. Mirahmadi, M. Abasi, B. Sarmadi--2003
  • High Frequancy Plasma Aided Rapid Prototyping , Tehran International Congress On Manufacturing Engineering (Ticme2005),A.Mirahmadi, S. Saedodin, Y.Shanjani
  • Analysis Of Conduction Heat Transfer In Spherical Powder Particles By Laplace Transform , 36th Annual Iranian Mathematics Conference Yazd, Iran ,A.Mirahmadi, S. Saedodin, Y.Shanjani M. Seraj
  • Tool Path Preparation In Selective Electrical Discharge Sintering , 13th Annual (International) Conference On Mechanical Engineering,A.Mirahmadi, S. Saedodin, R.Memari
  • Analysis Of Infiltration In Post Processing Stage Of Seds, 13th Annual (International) Conference On Mechanical Engineering,A.Mirahmadi, S. Saedodin, Y.Shanjani,
  • Discretization Of Heat Transfer Pde And Its Boundary Conditions In Sintering Stage Of Seds In Spherical Coordinates , 35th Annual Iranian Mathematics Conference Ahvaz, Iran ,A.Mirahmadi, S. Saedodin, Y.Shanjani
  • Heat Transfer Analysis In Sintering Stage Of Plasma Aided Rapid Prototyping, 35th Annual Iranian Mathematics Conference Ahvaz, Iran ,A.Mirahmadi, S. Saedodin, Y.Shanjani
  • Calculation Of Radiation Shape Factors In Plasma Aided Rapid Prototyping , 35th Annual Iranian Mathematics Conference Ahvaz, Iran , A.Mirahmadi, S.Saedodin, Y.Shanjani
  • Metal Powder Rapid Prototyping With Selective Electrical Discharge Sintering (Seds) , 12th Annual (International) Conference On Mechanical Engineering,A.Mirahmadi, S.Saedodin, Y.Shanjani
  • Magnet Hydro Dynamic Streamline Compution On A Molten Metal Mhd- Pump , 8. International Conference Of The Society Of Mechanical Engineers ,A.Mirahmadi, Mohseni
  • Fundmental Of Production And Solidbody Modeling With Existence Algebra , International Conference Of Manufacturing Engineers,A.Mirahmadi, A. Zarkani
  • Infrasonic Communication And Information Transmission In The Train Brake Pipe , 3. International Conference Of The Society Of Mechanical Engineers ,A.Mirahmadi, T. Jusefy
  • Artificial Intelligence In The Multi Locomotive Control System , International Conference Of Railways Organization,A.Mirahmadi, K.Mohmadi,
  • Multi Locomotive Radio Control System , International Conference Of Railways Organization,K.Mohmadi, A. Mirahmadi, M. Refan, J.Fariborz
  • Breack Air Leackage In The Multi Locomotive Tracks , International Conference Of Railways Organization,A.Mirahmadi
  • Progress In The Development Of Balances With Free Magnetic Suspension, Imeco Acta, Udssr, University Of Moskau,Th. Gast. , A. Mirahmadi
  • Fehler-Reduction Bei Kompensierenden Waegezellen Durch Selbsttaetige Kalibrierung , Imeco Conference, Germany, University Of Braunschweig,Th. Gast, A.Mirhmadi, F.E.Wagner
  • Modelle Und Strukturen In Mesz-Informationssystem , Verein Deutsche Ing. Conference,Germany / Frankfurt,Th,Gast A.Mirahmadi
  • Flow Measurment In A Pulsating Flow By A New Automaticaly Controlled Static Plate Flowmeter, Imeco Conference On Flow Measurement Of Fluid, Netherlands,Th. Gast, A. Mirahmadi
  • Contribution To The Development Of Freely Suspended Top Pan Balances, Thermochemica Acta ,Netherlands,Amsterdam,Th. Gast , A. Mirahmadi, F. Wagner
  • Fortschritte In Der Meszwert-Uebetragung Aus Einer Freischewebend Gewogenen Probe, Gefta / Nsta Symposium, Germany, University Of Kiel,Th.Gast, A.Mirahmadi, F.E. Wagner
  • Der Microprozessor Als Hilfsmittel Zur Loesung Mesz Und Steuerungs-Technischer Aufgaben Bei Einer Hochdruck-Waage , Vdi / Vde, Germany, Frankfurt,Th. Gast, A.Mirahmadi
  • Some New Devices Of Freely Suspended Top Pan Balances For Thermo-Gravimetric Measurements , European Symposium On Thermal Analysis, England, University Of Sal Ford ,Th. Gast , A. Mirahmadi, F. Wagner

  Mohammadi, Bijan 

  •   B. Mohammadi and H. Hosseini-Toudeshky, "Failure analysis of stiffened laminates using continuum damage mechanics with de-cohesive layer", ICCS15, 15th Int. Conf. on Composite Structures,(Porto, 15-17 June 2009).
  •   B. Mohammadi , H. Hosseini-Toudeshky, and M.H. Sadr-Lahijani, 10th Deformation and Fracture of Composites (DFC 10), 15-17th April 2009, Sheffield, UK.
  •   B. Mohammadi , H. Hosseini-Toudeshky, and M.H. Sadr-Lahijani, "Damage analysis of laminated composites using continuum damage mechanics incorporated with a semi-analytical layer-wise theory", 7th Int. Conf. on Composite Science & Technology (ICCST/7), American University of Sharjah , January 20 – 22, 2009 .
  •   B. Mohammadi , H. Hosseini-Toudeshky and M.H. Sadr-Lahidjani, "Effects of Free Edge Interlaminar Stresses on the Damage Evolution of Laminated Composites using Continuum Damage Mechanics ", 1st Int. Conf. of Engineering Against Fracture, 28-30 May 2008, University of Patras, Greece.
  •   B. Mohammadi , H. Hosseini-Toudeshky, and M.H. Sadr-Lahijani , " Prediction of Inelastic Behaviour of Quasi-Isotropic Laminates using Coupled Continuum Damage Plasticity ", Int. Conference on Composites: Characterization, Fabrication, and Application (CCFA-1), December 15-18 (2008), Kish Island-Iran .
  •   B. Mohammadi , H. Hosseini-Toudeshky and M.H. Sadr-Lahidjani, "Damage analysis of laminated plates using continuum damage mechanics", The 7th Conference of Iranian Aerospace Society (Aero2008), 19-21 Feb. 2008, Tehran, Iran.
  •   B. Mohammadi , GhannadPour S. A. M., Najafi A. “The Post-Buckling Analysis of Laminated Composites Containing Elliptical Holes” Proceeding of Fifth International Conference on Composite Science & Technology (ICCST5), American University of Sharjah, 2005.
  •   H. Hosseini-Toudeshky, B. Mohammadi , "Free edge effects stress analysis of laminates using layer-wise finite element method", Sixth Int. Conf. on Composite Science and Technology, ICCST/6, Durban, 22-24 Jan., 2007.
  •   H. Hosseini-Toudeshky, B. Mohammadi and Y. Alinia, "Effects of composite patches on the dynamic and buckling response of repaired aluminum panels", Sixth Int. Conf. on Composite Science and Technology, ICCST/6, Durban, 22-24 Jan., 2007.
  •   H. Hosseini-Toudeshky, B. Mohammadi , "Fatigue crack growth of repaired thick aluminum panels bonded with composite laminates in mixed-mode conditions", Sixth Int. Conf. on Composite Science and Technology, ICCST/6, Durban, 22-24 Jan., 2007.
  •   H. Hosseini-Toudeshky, B. Mohammadi , and M. Musivand-Arazanfudi, "The effects of thermal residual stresses on the fatigue life of aluminum panels repaired with various bonded composite materials", 8th International Conference on Computational Structures Technology (CST/ECT-8), 12-15 September, 2006, Las Palmas de Gran Canaria, Spain.
  •   H. Hosseini-Toudeshky, B. Mohammadi and S. Bakhshandeh, "Fatigue crack trajectory analysis of single-side repaired thin aluminum panels with various composite patch lay-up configurations", III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering (ECCM 2006), 5-8 June 2006, Lisbon, Portugal.
  •   H. Hosseini-Toudeshky and B. Mohammadi , "Mixed-mode experimental fatigue crack growth analyses of thin aluminum panels repaired with composite patches", DFC-8 & ETDCM-7 Conference, 4-6 April 2005, Sheffield, UK
  •   H. Hosseini-Toudeshky, R. Fattahi and B. Mohammadi , "Progressive damage analysis of composite scarf repair", ICCS15, 15th Int. Conf. on Composite Structures,(Porto, 15-17 June 2009).
  •   H. Hosseini-Toudeshky, S. Hosseini, and B. Mohammadi , "Progressive delamination analysis using discontinuous layered elements", ICCS15, 15th Int. Conf. on Composite Structures,(Porto, 15-17 June 2009).
  •   H. Hosseini-Toudeshky, A. Farrokhabadi, B. Mohammadi , "Transverse crack density evolution in a single orthotropic lamina under multi-axial stresses using analytical method", Mesomechanics 2009, 24-26 June 2009, Oxford, UK.
  •   H. Hosseini-Toudeshky, M. Jalalvand, B. Mohammadi ,"Delamination Analysis of Holed Composite Laminates Using Interface Element" Mesomechanics 2009, 24-26 June 2009, Oxford , UK .
  •   H. Hosseini-Toudeshky, S. Hosseini, and B. Mohammadi ,"Prediction of Delamination Initiation and Propagation of Laminated Plates Under Buckling Using De ‐ cohesive Law and Layer ‐ Wise Finite Element Method ", 10th Deformation and Fracture of Composites (DFC 10), 15-17th April 2009, Sheffield, UK.
  •   H. Hosseini-Toudeshky, R. Fattahi, and B. Mohammadi , "Repair of Composite Laminates using Scarf Patch", Accepted for presentation in the International Conference on Composites: Characterization, Fabrication, and Application (CCFA-1), December 15-18 (2008), Kish Island-Iran .
  •   H. Hosseini-Toudeshky, S. Hosseini, and B. Mohammadi , "Progressive delamination buckling analysis using interface element incorporated with full layer-wise plate theory", Accepted for presentation in the International Conference on Composites: Characterization, Fabrication, and Application (CCFA-1), December 15-18 (2008), Kish Island-Iran .
  •   H. Hosseini-Toudeshky, M. Shambooli, and B. Mohammadi , "Effects of Curing Temperature on Fatigue Crack Growth of Repaired Panels Using Various Composite Materials ", Accepted for presentation in Seventh International Conference on Composite Science & Technology (ICCST/7), American University of Sharjah , January 20 – 22, 2009 .
  •   H. Hosseini-Toudeshky, M. Jalalvand and B. Mohammadi , "Effects of various constitutive laws of interface element on delamination initiation and propagation of laminates", 1st Int. Conf. of Engineering Against Fracture, 28-30 May 2008, University of Patras, Greece.
  •   H. Hosseini-Toudeshky, M. Jalalvand and B. Mohammadi , "Delamination analysis using interface elements with various de-cohesive properties", The 7th Conference of Iranian Aerospace Society (Aero2008), 19-21 Feb. 2008, Tehran, Iran.
  •   H. Hosseini-Toudeshky, A. Farrokhabady and B. Mohammadi , "Prediction of interlaminar cracks in symmetric cross-ply laminates", The 7th Conference of Iranian Aerospace Society (Aero2008), 19-21 Fe. 2008, Tehran, Iran (In Persian).
  •   H. Hosseini-Toudeshky, M. Saber and B. Mohammadi , "Fatigue crack growth rate of adhesively repaired thin aluminum panels in general mixed-mode condition", 15th Annual (International) Conference of Mechanical Engineering, ISME 2007, Amirkabir University of Technology, 15-17, May, 2007, Tehran.
  •   H. Hosseini-Toudeshky, M. Saber and B. Mohammadi , "Analysis of repaired aluminum panels in general mixed-mode conditions", ECF16 Conference, Alexandroupolis, Greece, 3-7/7/2006.
  •   H. Hosseini-Toudeshky, B. Hamidi, B. Mohammadi and H.R. Ovesy, "Finite element based prediction of failure in laminated composite plates", ECF16 Conference, Alexandroupolis, Greece, 3-7/7/2006.
  •   H. Hosseini-Toudeshky and B. Mohammadi , S. Bakhshandeh, "A simple approach for crack growth life calculation of single-sided repaired aluminum panels", ICCST/5, 1-3 Feb. 2005, Sharjah, UAE.
  •   H. Hosseini-Toudeshky, B. Mohammadi , and H.R. Daghyani, “Analysis of mixed–mode cracked panels repaired with single-sided composite patch”, Fourth Int. Conference on Thin - Walled Structures, Loughbourough, UK, 22-24 June, 2004.
  •   H. Hosseini–Toudeshky, B. Mohammadi , and H.R. Daghyani, “Mixed-mode fracture analysis of repaired aluminum panels using composite patches”, Experimental Technique and Design in Composite Material 6 (ETDCM-6), Vicenza, Italy, 18–20 June, 2003.
  •   H. Hosseini-Toudeshky, B. Mohammadi , and H. R. Daghyani, “Effects of patch lay-up configuration on fracture parameters and fatigue life of single-sided repaired panels in mixed-mode condition”, The Fourth Iranian Aerospace Society Conference, Aero 2003, Amirkabir Uni. of Tech., Tehran, 25-27 Jan., 2003.
  •   H. Hosseini–Toudeshky, B. Mohammadi , and H.R. Daghyani, “Mixed–mode crack propagation based on various propagation angle criteria”, 11th Annual (International) Conference of Mechanical Engineering of Iranian Society , Mashhad, 13- 15 May, 2003.
  •   A. Najafi, SAM. GhannadPour, B. Mohammadi “The Effect of Circular/Elliptical Cutouts on the Buckling Behavior of Laminated Composite Plates” Proceeding of Fifth International Conference on Composite Science & Technology (ICCST5), American University of Sharjah, 2005.

 

 

  Navidbakhsh, Amin

  • K. Hassani,M. Navidbakhsh, M.Rostami,"Simulation Of The Cardiovascular System Using Equivalent Electronic System"24th Iasted Biomed2006,Innsbruck, Austria,(2006)
  • M.Navidbakhsh, H.M.Vafa,"Diagnosis Of St-Elevation According To Wavelet And Nervous System"The 12th Icbme2005,Singapore,(2005)
  • Z.Asgharpour, M.Navidbakhsh,"Simulation Of Valvular Heart Disease In Combination Of Two Cases Including Stenosis And Insufficiency"The 12th Icbme2005,Singapore,(2005)
  • Z.Asgharpour, M.Navidbakhsh,"Effects Of Exercise On Circulation With The Heart Rate Fixed"The 12th Icbme2005,Singapore,(2005)
  • M.Navidbakhsh, E.Khormali,"Blood-Flow Study In Systemic Pulmonary Shunt:Application Of Non-Newtonian Model"14th Iasted Applied Simulation And Modelling,(2005)
  • M.Navidbakhsh,M.R.Naghavi,"Non-Newtonian Behavior Of Blood Flow In 3d-Simulated Model Of Carotid Artery Bifurcation"14th Iasted Applied Simulation And Modelling,(2005)
  • M.Navidbakhsh, M.R.Naghavi," Study On Carotid Artery Bifurcation Lesions, Using Cfd"11th Iraninan Conference On Biomedical Engineering (Icbme2004)
  • M.Navidbakhsh, A.Haddadzadeh "Mathematical Modeling Of Electrolytes Exchange Across The Cell Membrane During Dialysis"(In Farsi) The 10th Annual (International) Conference Of Mechanical Engineering(2002)
  • S.Najarian,M.Navidbakhsh,P.Taghva," Design Of A Ultrafilteration Control System For Hemodialysis Machine"(In Farsi) 9th Iraninan Conference On Biomedical Engineering(Icbme2002)
  • M.Navidbakhsh,M.R.Naghavi,B.Firoozabadi," Settling Velocity Of Spherical Particles In Capillaries" Icbme2002, Singapore(2002)
  • M.Navidbakhsh,K.Hassani," Hydrodynamic Simulation Of Cardiovascular System And Flow Analysis In System Elements By Finite Element Method" Embec'02, Vienna-Austria (2002)
  • M.N Varag, M.Navidbakhsh ,"Simulation Of The Cardiovascular System And Study Of Pressure-Volume Variation "(In Farsi) 10th Iraninan Conference On Biomedical Engineering (Icbme2001)
  • M.Navidbakhsh ,A,Bagherieh,"Modeling Of The Mckibben Artificial Muscle By Describing The Antagonist Working Principles"(In Farsi) 10th Iraninan Conference On Biomedical Engineering (Icbme2001)
  • M.Navidbakhsh, A.Arefmanesh, M.Norooz Zadeh,H.R.Moghadam, M,"3-D Modeling Of Keratoplasty By Finite Element Method "(In Farsi) 9th Iraninan Conference On Biomedical Engineering (Icbme2000)
  • M.Navidbakhsh ,N.Moazeni,"Heat Exchange Modeling Of The Oxygenator By Finite Element Method"(In Farsi) 9th Iraninan Conference On Biomedical Engineering (Icbme2000)
  • M.Navidbakhsh,F.Farzad," Determination And Monitoring Patient Respiratory Parameters In Ventilator System"(In Farsi) 9th Iraninan Conference On Biomedical Engineering (Icbme2000)
  • M.Navidbakhsh,X.Wang, N.Lucius, J.F.Stoltz," Ecoulement Permanent Dans Un Aneurisme Axisymetrique: Importance Des Proprietes Non-Newtoniennes Du Sang"(In French) Xxieme Congres De La Societe De Biomecanique(1996)

 

  Safizadeh, Mir Saeed

  • M.S. Safizadeh, Z. Liu, C. Mandache, D.S. Forsyth, And A. Fahr, "Automated Pulsed Eddy Current Method For Detection Of Hidden Corrosion", 5th Iwaspnde, 2005, Quebec, Canada.
  • David Forsyth, Saeed Safizadeh, Min Liao, Abbas Fahr , "Ndt Reliability For Multi-Dimensional Discontinuities", 5th Iwaspnde, 2005, Quebec, Canada.
  • Liu, Z., Forsyth, D.S., Safizadeh, S., Genest, M., Fahr, A., And Marincak, "Fusion Of Visual And Eddy Current Inspection Results For The Evaluation Of Corrosion Damage In Aircraft Lap Joints", Spie, 2005, Usa
  • D. Forsyth, And M-S. Safizadeh, "Reliability Of Visual And Enhanced Visual Inspections Of Helicopter Tail Rotor Blade", 8th Joint Nasa/Faa/Dod Conference On Aging Aircraft From 01/31/2005 To 02/03/2005
  • M.S. Safizadeh, Z. Liu, D.S. Forsyth, A. Fahr, "Automatic Classification And Characterization Of Hidden Corrosion Using Pulsed Eddy Current", 16th World Conference On Nondestructive Testing, Montreal, Canada. 2004.
  • M.S. Safizadeh, D.S. Forsyth, Z. Liu, B.A. Lepine, M. Liao, "Pulsed Eddy Current Inspections Of Aircraft Structures In Support Of Holistic Damage Tolerance", , Sae Aerospace Manufacturing Technology Conference (Amtc), Montreal, Canada. 2003.
  • Z. Liu, D. S. Forsyth, M. S. Safizadeh, B. A. Lepine, A. Fahr, "Quantitative Interpretation Of Multi-Frequency Eddy Current Data By Using Data Fusion Approaches", Spie’s 8th Annual International Symposium On Nde For Health Monitoring And Diagnostics, 2003
  • Z. Liu, D.S. Forsyth, B.A. Lepine, S. Safizadeh, A. Fahr, "Quantifying Aircraft Hidden Corrosion By Using Multi-Modal Ndt Techniques", Review Of Progress In Quantitative Nondestructive Evaluation, Vol. 23, Pp. 1355-1362, July 2003
  • Min Liao, D.S. Forsyth, J.P. Komorowski, M. Safizadeh, Z. Liu, And N.C. Bellinger, "Risk Analysis Of Corrosion Maintenance Actions In Aircraft Structures", The Proceeding Of The 22nd Symposium Of The International Committee On Aeronautical Fatigue, 2003
  • M.S. Safizadeh, A.A. Lakis, And M. Thomas, "Time-Frequency Algorithms And Their Applications, Euromech Colloquium 437 Identification And Updating Methods Of Mechanical Structures", 19th – 21th June 2002, Prague, Czech Republic.
  • M.S. Safizadeh, D.S. Forsyth, A. Fahr, "Recent Studies On The Pod Analysis Of A-Hat Versus A Ndi Data", Review Of Progress In Quantitative Nondestructive Evaluation, Vol. 22, Pp. 1846-1853, July 2002
  • Z. Liu, D. S. Forsyth, M. S. Safizadeh, M. Genest, C. Mandache, And A. Fahr, "The Use Of Locally Weighted Regression For The Data Fusion With Dempster-Shafer Theory", 5th Iwaspnde, 2005, Quebec, Canada
  • Z. Liu, M. S. Safizadeh, D. S. Forsyth, B. A. Lepine, "Data Fusion Method For The Optimal Mixing Of Multi-Frequency Eddy Current Signals", Review Of Progress In Quantitative Nondestructive Evaluation, Vol. 22, Pp. 577-584, 2002.
  • D. S. Forsyth, M. S. Safizadeh, A. Fahr, "Issues In The Determination Of Probability Of Detection Using Field Inspection Data", Proceeding Of The 3rd European-American Workshop On The Reliability Of Nde And Demining, Berlin, 10-13 Sept. 2002
  • M.S. Safizadeh, A.A. Lakis, And M. Thomas, ", Rotating Machinery Fault Diagnosis Using Time-Frequency Methods", 20th Machinery Vibration, Reliability And Maintenance Seminar And Annual General Meeting October 21 To 23, 2002 Quebec City.
  • M.S. Safizadeh, B.A. Lepine, D.S. Forsyth And A. Fahr, "Analysis Of Pulsed Eddy Current Signals Using Time-Frequency Method", Proceeding Of The Iv International Workshop On Advances In Signal Processing For Non Destructive Evaluation Of Materials, 2001
  • M.S. Safizadeh, A.A. Lakis, And M. Thomas, "Diagnostic Des Machines Par Les Méthodes Temps-Fréquence", Annual Canadian Machinery Vibration Association Seminar, March 5 To 6, 2000, Ecole Technologie Supérieur, Montréal, Québec.
  • M.S. Safizadeh, A.A. Lakis, And M. Thomas, "Application Of Short-Time Fourier Transform In Machine Fault Detection", Proc. 12th International Congress And Exhibition On Condition Monitoring And Diagnostic Engineering Management, 1999

 

  Shokrieh, Mahmood Mehrdad

  • Shokrieh, M. M., H. Nosrati And M. Akhbari, “Tensile Strength Studies Of Woven Fabric Polyester/ Polyester Composites,” The 8th Asian Textile Conference, Textile And Modern Sciences, P. 94, Tehran, Iran, May 9-11, 205.
  • Shokrieh, M. M., And R. Rafiee, “Extraction Of Mechanical Properties Of Multidirectional Composites Using Classical Lamination Theory”, The Fifth Canadian-International Composites Conference In Vancouver, Bc, Canada. Submitted And Accepted
  • Shokrieh, M. M., And M. Rahmat, “Composite Material Reinforcement Of Concrete Sleepers Under 3-Point Bending Conditions,” The Iv-Th Moscow International Conference, Theory And Practice Of Technologies Of Manufacturing Composite Materials And New Metal All
  • Shokrieh, M. M., And F. Taheri B. And R. Moslemian, “Reinforcement Of Corroded Gas Pipes Using Composite Materials,” In Persian, 13th Annual (International) Conference On Mechanical Engineering In Isfahan, Iran, P. 308, 2005.
  • Shokrieh, M. M., And Ghasemi, A. R., “Calibration Factors Determination For Central Hole Drlling Method To Measure Residual Stresses In Isotropic And Orthotropic Materials,” In Persian, 13th Annual (International) Conference On Mechanical Engineering In I
  • Shokrieh, M. M., And R. Rafiee, “Stochastic Fatigue Analysis Of A Horizontal Axis Wind Turbine Composite Blade,” Fifth International Conference On Composite Science And Technology, American University Of Sharjah, 1-3 February, 2005, Pp. 197-202.
  • Shokrieh, M. M., And A. Najafi, “Damping Characterization Of Polymer Matrix Composites Based On Micromechanics Approach, Theory And Experiment,” Fifth International Conference On Composite Science And Technology, American University Of Sharjah, 1-3 Februa
  • Najafi A., Shokrieh, M. M., , Ghannadpour, S. A. M. And Mohammadi B., “The Effect Of Circular/Elliptical Cutouts On The Buckling Behavior Of Laminated Composites Plates,” Fifth International Conference On Composite Science And Technology, American Univers
  • Mohammadi, B., Ghannadpour, S. A. M., Shokrieh, M. M., And A. Najafi, “The Post Buckling Analysis Of Laminated Composites Containig Circular/Elliptical Holes,” Fifth International Conference On Composite Science And Technology, American University Of Shar
  • Shokrieh, M. M., And Mohammad R. Sareban, “A Method For Internal Reinforcement Of Concrete With Composite Materials Waste,” Conference On Application Of Frp Composites In Construction And Rehabilitation Of Structures, Pp. 19-29, May 4, 2004, In Persian.
  • Shokrieh, M. M., And Rafiee, R., “Life Prediction Of A Composite Horizontal Axis Wind Turbine Blade,” Annual International Mechanical Engineering Conference, Tehran, In Persian, Pp. 240, 2004.
  • Shokrieh, M. M., And Kamali Shahri, S. M., “Residual Stresses In Thermoset Polymer Composites” The Second International Conference On Structural Engineering Mechanics And Computation, 5-7 July 2004, Cape Town,. South Africa, P. 47.
  • Shokrieh, M. M., And A. Rezaee Azariani, “Effect Of Flame On The Fiber Reinforced Polymers,” Proceedings Of Fire Protections Of Buildings, Building And Housing Research Center, Tehran, Iran, Pp. 55-66, 2004, In Persian.
  • Shokrieh, M. M., And Jamal Omidi, M., “Reinforcement Of Aluminum Cracked Plates Using Carbon/Epoxy Composites,” Second International And Fifth National Conference Of Iranian Aerospace Society, 2004, In Persian.
  • Shokrieh, M. M., And Kamali Shahri, S. M., “Study Of Classical Method In Determination Of Residual Stresses In Composite Materials” Aero 2003, The Fourth Iranian Aerospace Society Conference, Pp. 382-391, 2003, In Persian.
  • Shokrieh, M. M., And Ali Babaee S., “Design And Manufacturing Of Hybrid Composite Belt For A Weaving Machine,” In Persian, Proceedings Of The Sixth Conference Of Manufacturing And Production Engineering, 2003.
  • Shokrieh, M. M., And Chahardehi A. E., “Reinforcement Of Spherical Vessels Using Composite Materials,” Proceedings Of The Sixth Conference Of Manufacturing And Production Engineering, 2003, In Persian
  • Shokrieh M. M., Taheri Behrooz, F, And Fadaee Arasi, M., “Measurement Of Hygro-Thermal Properties Of Aramid/Epoxy Composite For Cylindrical Specimens And Evaluation Of Feek Equation,” Proceedings Of The 11 Th Annual Conference (International) Of Mechanica
  • Shokrieh M. M., And Seidi, A., “Design Of Skid Of Bell 214 Helicopter Using Composites,” Proceedings Of The 11 Th Annual Conference (International) Of Mechanical Engineering,” Iran, Mashhad, Pp. 1264-1270, 2003, In Persian.
  • Shokrieh M. M., And Zakeri, M., “Evaluation Of Fatigue Life Of Composite Materials Using Progressive Damage Modeling And Stiffness Reduction,” Proceedings Of The 11 Th Annual Conference (International) Of Mechanical Engineering,” Iran, Mashhad, Pp. 1256-1
  • Shokrieh M. M., And Paryab, N., “Repair And Reinforcement Of Gas Pipes Using Composite Materials,” Proceedings Of The 11 Th Annual Conference (International) Of Mechanical Engineering,” Iran, Mashhad, Pp. 45-52, 2003, In Persian.
  • Shokrieh, M. M., And Hasani, A., “Shear Buckling Of Composite Drive Shafts Under Torsion,” The Sixth International Conference On Flow Process In Composite Materials (Fpcm-6), Auckland, New Zealand, 15-17 July, 2002.
  • Shokrieh, M. M., And Mahmoudi, J., “Shear Creep In Composite Materials,” Proceedings Of The 10th Annual International Mechanical Engineering Conference, Tehran, Vol. 4, Pp. 2321-2328, May 25-27, 2002, In Persian.
  • Shokrieh, M. M., And Ghasemi, A., “Aerodynamic Design And Static Analysis Of A Composite Wind Turbine Blade” Proceedings Of The 10th Annual International Mechanical Engineering Conference, Tehran, Vol. 4, Pp. 2335-2342, In Persian, May 25-27, 2002.
  • Shokrieh, M. M., And Mousavi Malevajerdi S. A., “Study Of Bending Behaviour Of Reinforced Concrete Beams, Strengthened With Glass/Epoxy And Polyester /Epoxy Composites,” The 1st Conference & Retrofitting Of Structures, Submitted And Accepted, In Persian,
  • Shokrieh, M. M., And Mozafari, M., “Residual Compressive Strength Of Composite Plates Under Impact Loading,” Third Canadian International Composites Conference, 21-24 Aug. 2001, Montreal, Quebec, Canada.
  • Shokrieh, M. M., And Rafiee, R., “Structural Design Of Composite Transmission Poles,” International Conference On Materials For Advanced Technologies (Icmat 2001), Singapore, 1-6 July 2001
  • Shokrieh, M. M., And Rafiee, R., “Design And Analysis Of A Composite Transmission Pole,” In Persian, Proceedings Of 5th International & 9th Annual Mechanical Engineering Conference, Iran, Rasht, Vol. 1, Pp. 77-84, 2001.
  • Shokrieh, M. M., Seyed A. Mousavi Malevajerdi, “Strengthening Of Reinforced Concrete Beams Using Composite Laminates,” International Conference On Frp Composites In Civil Engineering, Hong Kong, 12-14 Dec. 2001.
  • Shokrieh, M. M., And Seyed A. Mousavi Malevajerdi, “Strengthening Of Reinforced Concrete Structures Using Composite Plates,” In Persian, Concrete And Development First International Conference, Pp. 235-251, April-May, 2001.
  • Shokrieh, M. M., And Bohlool, A., “Effects Of Mechanical Properties Of Unidirectional Plies On Stress Analysis Of Composite Structures,” Accm-2000, Second Asian-Australasian Conference On Composite Materials, 18-20 Aug. 2000, Korea, Kyongju, Pp.535-542.
  • Shokrieh, M. M., And Haghiri, K., “Effective Parameters On Optimum Design Of Composite Pressure Vessels,” Eccm9, Composites - From Fundamentals To Exploitation, The Premier Composites Conference In Europe, 4-7 June 2000, Brighton, England.
  • Shokrieh, M. M., And Sadrabadi, B. B., “Design Of A Composite Telescopic Mast,” First Seminar On Design, Manufacturing, Installation And Protection Of Radio And Television Masts, Irib Of Islamic Republic Of Iran, Pp. 1-6, 1999.
  • Shokrieh, M. M., And Taheri Behrooz, F., “Wing Instability Of A Full Composite Aircraft,” Third International Conference On Composite Science And Technology, Sampe-2000, Moscow, Russia, Pp. 730-743, 2000
  • Shokrieh, M. M., Maghsoudi, M., And S. M. Tajali Bakhsh, “ A Study On Adhesive Joints Of Laminated Composites,” Sixth Annual Mechanical Engineering Conference And Third International Mechanical Engineering Conference Of The Iranian Society Of Mechanical E
  • Shokrieh, M. M., And Lessard, L. B., “Residual Fatigue Life Simulation Of Laminated Composites,” International Conference On Advanced Composites 98, Egypt,, 1998, Pp. 79-86.
  • Shokrieh, M. M., “Fatigue Damage Modeling Of Mechanical Joints Made Of Composite Materials,” Aviation 2000, International Symposium, Zhukovsky, Moscow, Russia, August 19-24, 1997, Pp. 343-351
  • Shokrieh, M. M., Lessard, L. B., And C. Poon, “Three-Dimensional Progressive Failure Analysis Of Pin/Bolt Loaded Composite Laminates,” Agard Symposium, Meeting On Bolted/Bonded Joints In Polymer Composites Florence, Italy, Pp. 7-1 - 7-10, 1996.
  • Shokrieh, M. M, And Lessard, L. B., “Progressive Fatigue Modeling Of Laminated Composite Pinned/Bolted Connections,” Proceedings Of Iccm-11, 11th International Conference On Composite Materials, Australia, Vol. Ii: Fatigue, Fracture And Ceramic Matrix Com
  • Lessard, L. B., And Shokrieh, M. M., “Overview Of Failure In Composite Materials,” Applied Mechanics In Americas, Vol. Iii, Pp. 255-260., Edited By L. A. Godoy, S. R. Idelsohn, And P. A. A. Laura, And D. T. Mook, Aam, And Amca, Santa Fe, Argentina, 1995,
  • Shokrieh, M. M., Eilers, O. P., And Lessard, L. B., “Determination Of Interlaminar Shear Strength Of Graphite/Epoxy Composite Materials In Static And Fatigue Loading,” Proceedings Of Iccm-10, 10th International Conference On Composite Materials, Whistler,
  • Milette J. F., Shokrieh M. M. And Lessard L. B., “Static And Fatigue Behaviour Of Unidirectional Composites In Compression,” Proceedings Of Iccm-10, 10th International Conference On Composite Materials, Whistler, B. C., Canada, 1995, Pp. I-617 -- I-624.
  • Shokrieh, M. M., And Lessard, L. B., “Residual Strength And Fatigue Life Of Unidirectional Composite Plies Under Multiaxial Fatigue Loading,” Sampe, Atlanta, 1994, Pp. 303-314
  • Shokrieh, M. M., And Lessard, L. B., “Fatigue Behaviour Of Composite Pinned / Bolted Joints - New Modeling Approach,” Cancom 93, Ottawa, Canada, (1993), Pp. 871-877.
  • Lessard, L. B., And Shokrieh, M. M., Esbensen, J. H., “Analysis Of Stress Singularities In Laminated Composite Pinned/Bolted Joints,” 38th Sampe Symposium And Exhibition, May 10-13, (1993), Anaheim, California, Pp. 53-60.
  • Lessard, L. B., Shokrieh, M. M., And Schmit, A. S., “Three Dimensional Stress Analysis Of Composite Plates With Or Without Stress Concentrations,” 9th International Conference On Composite Materials, 12-16 July, (1993) Madrid, Spain, Pp. 243-250.
  • Lessard, L. B., And Shokrieh, M. M., “Failure Of Laminated Composite Materials,” International Conference On Engineering Applications Of Mechanics, Tehran, Iran, (1992), Pp. 475-483.
  • Lessard, L. B., And Shokrieh, M. M., “Pinned Joint Failure Mechanisms, Part I - Two Dimensional Modeling,” First Canadian International Composites Conference And Exhibition, Cancom 91, Montreal, Canada, (1991), Pp. 15d1-15d8.

 

  Taghavi, Reza

  • R. Taghavi-Zenouz, Rafiei Y., Beheshti S. M., Design And Manufacturing Of A Combined Pressure And Temperature Rake For Gas Turbine Engine Testing, 14th Annual (International) Conference Of Mechanical Engineering, Isfahan, 16-18 May 2006.
  • R. Taghavi-Zenouz, Kolaei A., Salari M., Modeling And Analysis Of Transition Phenomenon On Flat Plates And Wind Turbine Blades Based On 3-Equation Model, 14 Annual (International) Conference Of Mechanical Engineering, Isfahan, 16-18 May 2006.
  • Taghavi-Zenouz R., Shahriari M., Boundary Layer Characteristics On Rotor Blades Of Transonic Axial Compressors, 14th Annual (International) Conference Of Mechanical Engineering, Isfahan, 16-18 May 2006.
  • Salari M., Taghavi-Zenouz R., Prediction Of Transition In Boundary Layers Based On Modeling Of Velocity Fluctuations In Laminar Flows, 14th Annual (International) Conference Of Mechanical Engineering, Isfahan, 16-18 May 2006.
  • Taghavi-Zenouz R., Salari M., Prediction Of Bypass Transition In Boundary Layers Using A Physical Model, 13th Annual (International) Conference Of Mechanical Engineering, Isfahan, 2005.
  • Ardakani M. A., Salari M., Taghavi-Zenouz R., Experimental Investigation On Performances Of Hot Wire And Hot Film Anemometries, 13th Annual (International) Conference Of Mechanical Engineering, Isfahan, 2005.
  • Taghavi-Zenouz R., Ghorbani R., Aerodynamic Blading And Performance Map Prediction Of Axial Compressors, Aiaa-2005-1012, 17th International Symposium On Air Breathing Engines (Isabe), Munich, Germany, Sep. 4-9, 2005
  • Taghavi-Zenouz R., Ghorbani R., A Theoretical Investigation On Aerodynamic Loading Effects On Geometry Of Axial Compressor Blades, Isme 2003, 13-15 May 2003.
  • Taghavi-Zenouz R., Ghorbani R., Loss Calculation In A Transonic Axial Compressor Using Through Flow Analysis At Design Point, 5th National And 2nd International Conference Of Iranian Aerospace Society, 18-20 Feb. 2003.
  • Taghavi-Zenouz R., Khorsand M., Numerical Flow Visualization In A Transonic Axial Compressor, 7th Triennial International Symposium On Fluid Control, Measurement And Visualization, Sorrento, Italy, Aug 25-28, 2003.
  • Taghavi-Zenouz R., Babaei H., Drag Reduction Of Passenger Trains, 8th Iranian Fluid Dynamics Conference, Tabriz, Iran, Sep. 8-10, 2003.
  • Taghavi-Zenouz R., Ghorbani R., Design Of Supersonic Axial Compressor Blades Using Streamline Curvature Method, 4th Conference Of Iranian Aerospace Society, 25-27 Jan. 2002.
  • Taghavi-Zenouz R., Ghorbani R., Design Of Supersonic Axial Compressor Blades Using Streamline Curvature Method, 4th Conference Of Iranian Aerospace Society, 25-27 Jan. 2002.
  • Taghavi-Zenouz R., Babaei H., A Wind Tunnel Investigation On Raja Passenger Trains, International Conference On Fluid Mechanics, Mashhad, Iran, 2002.
  • Taghavi-Zenouz R., Numerical Analysis Of Flow In A Transonic Axial Compressor Cascade, 9th Asian Congress On Fluid Mechanics, Isfahan, Iran, May 27-31, 2002.
  • Taghavi-Zenouz R. Growth And Bursting Of A Separation Bubble On An Elliptic Cylinder, 9th Asian Congress On Fluid Mechanics (9acfm), Isfahan, Iran, May 27-31, 2002.
  • Taghavi-Zenouz R., Visualization Of Surface And Wake Flow Patterns Around 2-D And 3-D Elliptic Bodies,10th International Symposium On Flow Visualization, Kyoto, Japan, Aug 26-29, 2002.
  • Lamont P.J., Taghavi-Zenouz R., Poll D.I.A., Reynolds Number Effects On The Flow Around 2-D Elliptic Cylinders, 33rd Aiaa Meeting And Exhibition, Reno-Nev, Usa, 1993

 

View: 49487 Time(s)   |   Print: 7053 Time(s)   |   Email: 248 Time(s)   |   0 Comment(s)
::
School of Mechanical Engineering
Persian site map - English site map - Created in 0.14 seconds with 49 queries by YEKTAWEB 4665