|
Educational Records:
| Degree |
Major |
Year of Graduation |
University |
Country |
| B.Sc |
Casting |
1985 |
Iran University of Science and Technology |
Iran |
| M.Sc |
Materials Selection and Properties |
1989 |
Iran University of Science and Technology |
Iran |
| Ph.D |
Metallurgy, Casting Process |
1999 |
Birmingham University |
UK |
Title of MS.c and Ph.D Thesis:
MSc Thesis: Production and Properties of Al Alloyed (20-25 W% Al) Spheroidal Graphite Cast Iron
PhD Thesis: The Mechanism of Bubble Damage in Castings
Fields of Research Interests:
1- Effect of various alloying elements on the microstructure of cast iron, such as Al, Cu, Ni, Si, Cr alloyed cast iron.
2- Designing of running system of casting component using simulation softwares.
3- Composite of Al and Mg alloys
4- Bi-metal of various couples using casting and joining process. Centrifugal casting.
5- Dynamic and short time oxidation of melts of Al, Mg, Zn and their alloys.
6- Porous and cellular materials, specially metal foams.
7- Welding and joining of dissimilar metals and alloys.
Teaching Experience:
1- Casting, undergraduate student
2- Pattern and Mold Design, undergraduate
3- Casting and solidification Labs, undergraduate.
4- Non-destructive test, undergraduate.
5- Solidification, undergraduate.
6- Advanced Casting, postgraduate.
7- Engineering design in the casting of metal, postgraduate.
8- Casting defects, postgraduate.
9- Special Course in Metal foams (porous materials), postgraduate.
Publications:
| Journals: ISI and ISC |
| 53- Mohammadi, K. , Divandari, M. , Shabestari, S.G., " Investigation on the flow limitation during copper electroplating of polyurethane foam", Journal of Materials Research and Technology, 2021, 14, pp. 1532–1538 |
| 52- Taheri Bagh, N. , Divandari, M. , Shahmiri, M. , Akbarifar, M., " Characteristics of Dynamically Formed Oxide Films in Al–Zn Melt", International Journal of Metalcasting, 2021, 15(3), pp. 747–762 |
| 51- Pourgharibshahi, M. , Saghafian, H. , Divandari, M. , Golestannejad, F., " A Critical Conception of Hot-Tearing Susceptibility: Shape Casting with Wrought Aluminum Alloys", International Journal of Metalcasting, 2021 |
| 50- Khalvan, M.M. , Divandari, M., " Microstructure of spheroidal graphite aluminum-alloyed cast irons (SGAACI) containing up to 7.5 wt% produced via in-mold process", International Journal of Metalcasting, 2021, 15(1), pp. 271–280 |
| 49- Akbarifar, M. , Divandari, M. , Boutorabi, S.M.A. , ... Yoon, Y.-O. , Kim, S.K., " Short-Time Oxidation of Al–Mg in Dynamic Conditions", Oxidation of Metals, 2020, 94(5-6), pp. 409–429 |
| 48- Jalilvand, M.M. , Bagh, N.T. , Akbarifar, M. , Divandari, M., " A New Insight to Dynamic Oxidation of Molten Metals by the Parametric Study of Oxide/Metal/Oxide Sandwich Formation", International Journal of Metalcasting, 2020, 14(4), pp. 949–961 |
| 47- Pourgharibshahi, M. , Divandari, M. , Saghafian, H. , Timelli, G., " Eutectic Nucleation in 7xxx Series Aluminum Alloys from a Non-classical Viewpoint", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020, 51(9), pp. 4572–4583 |
| 46- Jalilvand, M.M. , Akbarifar, M. , Divandari, M. , Saghafian, H., " On the dynamically formed oxide films in molten Mg", Journal of Magnesium and Alloys, 2020, 8(1), pp. 219–230 |
| 45- Jalilvand, M.M. , Saghafian, H. , Divandari, M. , Akbarifar, M., " Surface oxidation study of molten Mg–Al alloys by oxide/metal/oxide sandwich method", Journal of Magnesium and Alloys, 2020 |
| 44- Pourgharibshahi, M. , Divandari, M. , Saghafian, H. , Fabrizi, A. , Timelli, G., " Increasing the Liquidus Temperature by Employing the Controlled Diffusion Solidification (CDS) Process: A Potential Route to Improved Castings", IOP Conference Series: Materials Science and Engineering, 2019, 529(1), 012044 |
| 43- Pourgharibshahi, M., Saghafian, H., Divandari, M., Timelli, G., "Controlled Diffusion Solidification Pathway of an AA 7xxx Series Aluminum Alloy", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(1), pp. 326-335, 2019 |
| 42- Mohammadi, M., Javid, A.A.S., Divandari, M., "Introducing a method to determine nonautoclaved aerated concrete air content based on packing theory", Journal of Materials in Civil Engineering, 30(3),04017312, 2018 |
| 41- Morteza Gholami, Mehdi Divandari, "Interfacial Phases and Defects Characteristics of Al/Cu-Zn Bimetal Produced via Centrifugal Casting Process " Iranian Journal of Materials Science and Engineering" Volume 15, 2018 |
| 40-Mohammadi, Mohsen; Shirzadi Javid, Ali Akbar and Divandari Mehdi, “Packing theory application to determine non-autoclaved aerated concrete (NAAC) air pores content”, Journal of Materials in Civil Engineering Volume 30 Issue 3 - March 2018 |
| 39-M. H. Zamani, M. Divandari *, M. Tamizifar "On the Characteristics of Friction Stir Welding lap Joint of Magnesium and Aluminum" Iranian Journal of Materials Science and Engineering, Vol. 15, Number 1, 2018, DOI: 10.22068/ijmse.15.1.8 |
| 38-M. Divandari, M. Mehrabin "A Comparative Study on Characteristics of Dynamic Oxide Film of Molten Zn-Al Alloys" Iranian Journal of Materials Science and Engineering, Vol. 14, Number 3, 2017, pp 34-47. DOI: 10.22068/ijmse.14.3.34 |
37-Mohammad Pourgharibshahi, Mehdi Divandari, Hassan Saghafian Larijani, Peyman Ashtari, "Controlled Diffusion Solidification Processing: A Review" Journal of Materials Processing Technology, 2017, https://doi.org/10.1016/j.jmatprotec.2017.07.018,
Link for download |
|
36-S. G. Shabestari, M. Divandari, M. H. Ghoncheh, V. Jamali. “Interplay among Coating Thickness, Strip Size, and Thermal and Solidification Characteristics in A356 Lost Foam Casting Alloy” Metallurgical and Materials Transactions B, 2017, In press.
|
| 35-M Akbarifar, M Divandari, "On the Interfacial Characteristics of Compound Cast Al/Brass Bimetals", International Journal of Metalcasting, July 2017, Volume 11, , Issue 3, pp 506–512 |
| 34-M Akbarifar, M Divandari, "Study of Al/cast iron interface and graphite behavior" Journal of Mining and Metallurgy B: Metallurgy, 2017, vol. 53, iss. 1, pp. 53-59, doi:10.2298/JMMB160108027A |
| 33-AM Fathi Dehkharghani, M. Divandari, "Investigation of electroless cooper plating on polyurethane foam, as an initial step of open cell foam production process" Transaction of IMF, 00202967 15Z 000000000248, 2015, DOI |
| 32-SSM, SHAFIEI, M. DIVANDARI, SMA BOUTORABI, R. NAGHIZADEH "COMPARISON OF PROPERTIES OF TiN/TiCN AND PLASMA NITRIDING/TiCN FILMS DEPOSITED ON THE STEEL BY PULSED DC-PACVD" IRANIAN JOURNAL OF MATERIALS ENGINEERING, 12(2), 47-55, 2015. |
| 31-SSM, Shafiei, M. Divandari, SMA Boutorabi, Naghizadeh, " Effect of gas mixture on the characteristics of PACVD TiN coating hot-worked tool steel", Journal of Ceramic Processing Research, 15(5), 308-311, 2014 |
| 30-SMM Shafiei, M. Divandari, SMA Boutorabi, R. Naghizadeht "Characterization of TiCN thin films deposited by DC-Pulsed PACVD using methane precursor", Materials Research 17 (6), 1651-1657. 2014. |
| 29-A. Rasooli, MA Boutoarbi, M. Divandari, A. Azarniya, " Effect of high heating rate on thermal decomposition behavior of titanium hydride (TiH2) powder in air", Bulletin of Materials Science, 36(2), 301-309, 2013. |
| 28-G. R. Zare; M. Divandari; H. Arabi, "Investigation on interface of Al/Cu couples in compound casting", Materials Science and Technology, 2012. DOI |
| 27-S. M. Emami, M. Divandari, E. Hajjari, H. Arabi, "Comparison between conventional and lost foam compound casting of Al/Mg light metals ", International Journal of Cast Metals Research, 2012 |
| 26-S. A. Azarmehr, M. Divandari, H. Arabi, "Investigation on thickness of short time oxide films in Al– 1Mg and Al– 2Mg alloys",Materials Science and Technology, 2012 |
| 25-B Nayebi, M. Divandari, "Characteristics of dynamically formed oxide films on molten aluminium", International Journal of Cast Metals Research, 2012 |
|
24-A. R. Mirak, M. Divandari, S. M. A. Boutorabi and J. A. Taylor "Effect of oxide film defects generated during mould filling on mechanical strength and reliability of magnesium alloy castings (AZ91) " , International Journal of Cast Metals Research, 2012
|
|
23-Ali Rasooli , M. Divandari, Hamid Reza Shahverdi , and Mohammad Ali Boutorabi, " Kinetics and mechanism of titanium hydride powder and aluminum melt reaction " International Journal of Minerals, Metallurgy and Materials , Vol. 19 , No. 2 , P-165, (2012)
|
|
22-H. Sharifi, A.R. Khavandi, M. Divandari, and M.I. Hasbullah, " Effect of magnesium and nickel coatings on the wetting behavior of alumina toughened zirconia by molten Al-Mg ", International Journal of Minerals, Metallurgy and Materials , Vol.19, No. 1, P- 77, (2012)
|
| 21-S. M. Emami, M. Divandari, H. Arabi, E. Hajjari, "Effect of Melt-to-Solid Insert Volume Ratio on Mg/Al Dissimilar Metals Bonding", Journal of Materials Engineering and Performance, 2012 |
| 20-E. Hajjari, M. Divandari, S. H. Razavi, T. Homma, S. Kamado, "Microstructure characteristics and mechanical properties of Al 413/Mg joint in compound casting process", Metallurgical and Materials Transactions A, 2012 |
|
19-E. Hajjari, M. Divandari, S.H. Razavi, S.M. Emami, S. Kamado, " Estimation of the transient interfacial heat flux between substrate/melt at the initiation of magnesium solidification on aluminum substrates using the lumped capacitance method ", Applied Surface Science , Vol. 257, Issue 11, pp 5077-5082, 2011.
|
|
18-Hajjari, E., Divandari, M., Arabi, H. , "Effect of applied pressure and nickel coating on microstructural development in continuous carbon fiber-reinforced aluminum composites fabricated by squeeze casting" Materials and Manufacturing Processes 26 (4) pp. 599-603, 2011.
|
|
17-E. Hajjari, M. Divandari, S.H. Razavi, T. Homma, S. Kamado, "Intermetallic compounds and antiphase domains in Al/Mg compound casting", Intermetallics , pp, 1-5, 2011.
|
|
16-E. Hajjari , M. Divandari, A.R. Mirhabibi, " The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting", Materials and Design, Vol, 31, Issue 5, pp, 2381–2386, 2010.
|
|
15-E. Hajjari, M. Divandari, S.H. Razavi, S.M. Emami, T. Homma, S. Kamado , " Dissimilar joining of Al/Mg light metals by compound casting process ", J. of Materials Science , Vol. 46, Issue 11, pp 6491-6499, 2011.
|
|
14-H. Sharifi, M. Divandari, A. Khavandi, and M.H. Idris, " Effect of Al powder and silica sol on the structure and mechanical properties of Al2O3-ZrO2 foams " Acta Metallurgica Sinica (English Letters) , 23 (4), pp. 241-247, 2010.
|
|
13-Divandari, M. , Jamali, V. , Shabestari, S.G. " Effect of strips size and coating thickness on fluidity of A356 aluminum alloy in lost foam casting process " , International Journal of Cast Metals Research, 23 (1), pp. 23-29 , 2010.
|
|
12-M.M.Hejazi, M.Divandari, E.Taghaddos" Effect of copper insert on the microstructure of gray iron produced via lost foam casting" Materials and design, 2009
|
| 11-M. Divandari, A.R.Vahid golpayegani, " Study of Al/Cu rich phases formed in A356 alloy by inserting Cu wire in pattern in LFC process" Materials and design, 2009 |
|
10-M. Divandari, H. Arabi, H. Ghasemi, "Thermal fatigue resistances of 356 and 413 cast Al alloys" Iranian j. of materials science and engineering, vol 5, No 3, 2008
|
|
9-E. Hajari, M. Divandari, " An investigation on the microstructure and tensile properties of direct squeeze cast and gravity die cast 2024 wrought Al alloy", Materials and design, 2008
|
|
8-A. R. Mirak, M. Divandari, S. M. A. Boutorabi, J. Compbell, “Oxide film characteristics of AZ91 magnesium alloy in casting conditions”, Int. J. of cast metals. Res., Vol. 20, No. 4, 2007 pp- 215-220. DOI 10.1179/136404607X256042
|
|
7-H. Arabi, M. Divandari, A.H.M. Hosseini, "The effect of Ti contents on the amounts of inclusions formation and mechanical properties of c300 high strength steel", Iranian J. of mat. Sci. & eng., No. 2, 2006
|
|
6-Y. H. Kharrazi, M. Divandari, S. Saghi, "Mold filling behaviour of double gating system in Aluminum LFC process”, Iranian J. of materials Sci. and Eng., No.2 , 2005
|
|
| 5-M. Divandari, J. Compbell, “Morphology of oxide films of Al–5Mg alloy in dynamic conditions in casting " Int. J. of cast metals. Res., Vol. 18 No. 3, 2005. DOI 10.1179/136404605225023000 |
| 4-M. Divandari, J. Compbell, “Oxide film characteristics of Al-7Si-Mg alloy in dynamic conditions in casting " Int. J. of cast metals. Res., Vol. 17 No. 3, 2004. DOI 10.1179/136404604225017546 |
| 3-S. Saghi, M. Divandari, Y. H. Kharrazi, " Flow behaviour of molten metal in Aluminum LFC process ”, Iranian J. of materials Sci. and Eng., Vo.1, Number 2 (6-2004) |
| 2-E. Hajjar, M. Divandari, A. R. Mirhabibi, "The study of electroless coating of nickel on carbon fibers”, Iranian J. of Materials Science & Eng., Vol. 1, No. 1, 2003 |
|
1-M. Divandari, J. Compbell, “A new technique for the study of aluminum oxide films " Aluminum Transaction, 1999, pp,233-238
|
|
Postgraduate Thesis:
| PhD Thesis |
| Rev. No. |
Title |
Researcher |
Result/ Publications |
Joint Supervisor |
| 8 |
Thesis title under review |
A. Khirabi |
Working |
Dr. SMA. Boutorabi |
| 7 |
Thesis title under review |
E. Porgharib |
Working |
Dr. H. Saghafian |
| 6 |
Study of interface and mechanical properties of Al/Mg joint using FSW process |
MH. Zamani |
Working |
Dr. M. Tamizifar |
| 5 |
Effects of various parameters on the characteristics of PACVD TiCN coating of a hot-worked tool steel |
SMM. Shafiei |
Working |
Dr. SMA. Boutorabi |
| 4 |
Effect of manufacturing parameters on interface and mechanical properties of Al-ZTA composite |
H. Sharifi |
Graduated |
Dr. AR. Khavandi |
| 3 |
Study of the Effective Parameters on Bonding of Al/Mg Interface in Compound Casting Process. |
E. Hajjari |
Graduated |
Dr. H. Razavi |
| 2 |
Investigation on the kinetic and mechanism of interaction of Titanium Hydride powder and Aluminum melt |
A. Rasooli |
Graduated |
Dr. SMA. Boutorabi, Dr. HR. Shahverdi |
| 1 |
Investigation on critical gate velocity of AZ91 Mg alloy in sand casting |
AR. Mirak |
Graduated |
Dr. SMA. Boutoarbi |
| M.Sc. |
| Rev. No. |
Title of Research work |
Student |
Co-workers University/student condition |
Joint supervised by |
| 63 |
Effect of nodular agent percent and in-gate location on the microstructure of casting produced by in-full mold mold process |
Mohsen. Mehdifar |
IUST/ Starting |
* |
| 62 |
Effect of Al percent (1-10 w%) on the microstructure and mechanical properties of Al alloyed spheroidal cast iron produced by in-mold process |
Mohammad Mahdi. Khaloavan |
IUST/Starting |
* |
| 61 |
Study of pouring time, modules and effective head on solidification characteristics of a hollow cylindrical casting with constant weight |
Amir. Moradi |
IUST/Starting |
Dr. SMA. Boutorabi |
| 60 |
Effect of process variables on the characteristics of Ni coating on a polyurethane foam |
Mahsa. Iranshahi |
IUST/working |
Dr. M. Divandari |
| 59 |
Study of interface characteristics of Al/Brass bimetal produced via vertical centrifugal casting process |
Morteza. Gholami |
IUST/working |
Dr. MT Salehi |
| 58 |
An investigation on the morphology of dynamic oxide films in Zn alloys. |
Mehdi. Mehrabian |
IUST/working |
|
| 57 |
Investigation of copper plating on polymeric foam (For meat foam production) |
Saeeid. Esfandiari |
IUST/Graduated (2013-2015) |
Dr S. Rastegari |
| 56 |
Study of 1-5 w% Si on the heat resisting of grey cast iron. |
Ali. Moazampor |
IUST/Graduated (2012-2015) |
|
| 55 |
Effect of interlayer on the microstructure and mechanical properties of Mg/Al joint by FSW process |
Majid Shirabadi Farhani |
Islamic Azad University/Graduated |
|
| 54 |
|
Siyed M. Amin Sadat Akhavi |
Azad University Student/working |
|
| 53 |
|
Ali. Mirzaeei Novin |
Azad University Student/working |
|
| 52 |
|
Hosien Mokhlesian |
IUST/Graduated |
|
| 51 |
|
Emir Karacam |
Istanbul Technical University/Graduated |
Prof. H. Cimenoglu, |
| 50 |
|
Morteza Sarvari |
Graduated |
|
| 49 |
|
Mehran Salavatbakhsh |
IUST/Graduated |
Dr. AR. Khavandi, Dr. M. Divandari |
| 48 |
|
Mohsen Mohammadi |
IUST/Graduated |
Dr. B. Eftekhari Yekta |
| 47 |
|
Fatemeh Ferdosi |
IUST/Graduated |
Dr. AR. Khavandi |
| 46 |
|
Abbas Khoshkharam |
IUST/Graduated |
Prof. SMA Boutorabi |
| 45 |
|
Mehdi Akbarifar |
IUST/Graduated |
|
| 44 |
Effect of melt temperature, rotational speed and mold preheating temperature on the characteristics of Al/Cu bimetal produced via centrifugal casting |
Ehsan Hiteh |
Islamic Azad University/Graduated |
Prof. N. Tovhidi |
| 43 |
|
Rasool Mohammadi |
IUST/Graduated |
Dr. M. Divandari, Prof. SMA Boutorabi |
| 42 |
|
Amir Bahraeei |
IUST/Graduated |
Dr. M. Divandari |
| 41 |
|
Amir Mohammad Fathi Dehkhorghani |
IUST/Graduated |
Dr. M. Divandari |
| 40 |
|
Mohammad Khanbiki |
Mine and Industry University/graduated |
Dr. M. Tamizifar |
| 39 |
|
Hadi Baradaran Mehrabadi |
IUST/Graduated |
Dr. H. Saghafian |
| 38 |
|
Golamreza Zare |
IUST/Graduated |
Dr. H. Arabi |
| 37 |
|
Mehdi Hiydari |
IUST/Graduated |
Dr. AR. Khavandi, |
| 36 |
|
Majid Hemati |
IUST/Graduated |
|
| 35 |
|
Amin Porarian |
IUST/Graduated |
|
| 34 |
|
Hamid Reza Pakzaman |
IUST/Graduated |
Dr. AR. Khavandi |
| 33 |
|
Fatemeh Ferdosi |
IUST/Graduated |
Dr. AR. Khavandi |
| 32 |
|
Bashir Ajami |
IUST/Graduated |
Dr. H. Arabi |
| 31 |
|
Siyed Mohsen Emami |
IUST/Graduated |
Dr. H. Arabi |
| 30 |
|
Hamed Khanepaz |
IUST/Graduated |
Dr. M. Shahmiri |
| 29 |
|
Sieyd Amir Azarmehr |
IUST/Graduated |
Dr. H. Arabi |
| 28 |
|
Masoud arghiani |
Sahand University/Graduated |
Dr. M. Azadbeh, |
| 27 |
|
Mehrdad Mehrtash |
IUST/Graduated |
|
| 26 |
|
Ali Delbari |
IUST/Graduated |
Dr. H. Arabi |
| 25 |
|
Behzad Nayebi |
IUST/Graduated |
|
| 24 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Ata Kiapor |
IUST/Graduated |
|
| 23 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Amir Hosein Reshadi |
IUST/Graduated |
|
| 22 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Yase Delavarian |
IUST/Graduated |
Dr. M. Divandari |
| 21 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Ehsan Asadi |
IUST/Graduated |
Dr. M. Divandari |
| 20 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Nasim Divandari |
Islamic Azad University/Ferdosi University |
Dr. Divandari, Prof. M. Mortazavi |
| 19 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Vahab Jamali |
IUST/Graduated |
Dr. M. Divandari, S. G. Shabestari |
| 18 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Siyamak Javadian |
IUST/Graduated |
Dr. M. Divandari |
| 17 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Alireza Baghaeri |
Tarbieat Modares/graduated |
Dr. H. R. Shahverdi, Dr. M. Divandari |
| 16 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Shahab Homayon Amlashi |
IUST/Graduated |
Dr. M. Divandari |
| 15 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Hosien Ghasemi Mieyanaeei |
IUST/Graduated |
Dr. M. Divandari. Dr. H. Arabi |
| 14 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Gholamreza Davaodi |
IUST/Graduated |
Dr. M. Divandari |
| 13 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Satar Dargahi |
IUST/Graduated |
Prof. Y. H. K. KHarazi, Dr. M. Divandari |
| 12 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Reza Khadem Hoseini |
IUST/Graduated |
Dr. M. Divandari, Prof. SMA. Boutorabi |
| 11 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Shariyar Ghasemi |
Semnan University/Graduated |
Dr. A. Habibolah zadeh, Dr. M. Divandari |
| 10 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Mojtaba Chenarani |
IUST/Graduated |
Dr. M. Divandari, Prof. SMA. Boutorabi |
| 9 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Alireza Vahid Golpayegani |
IUST/Graduated |
Dr. M. Divandari |
| 8 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Mahmood Poyamehr |
Tehran University/Graduated |
Dr. A. Halvaeei, Dr. M. Divandarii |
| 7 |
|
Mahmod Kordan |
Semnan University/Graduated |
Dr. A. Habibolah zadeh, Dr. M. Divandari |
| 6 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Amir Hosien Moteshaker Hosieni |
IUST/Graduated |
Dr. M. Divandari. Dr. H. Arabi |
| 5 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Majid Lajvardi |
IUST/Graduated |
Dr. M. Divandari |
| 4 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Ehsan Shojaei |
IUST/Graduated |
Dr. M. Divandari, Prof. SMA. Boutorabi |
| 3 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Saeeid Saghi |
IUST/Graduated |
Dr. M. Divandari, Dr. Y.H.K. Kharazi |
| 2 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite. |
Esmaiel Hajjari |
IUST/Graduated, Sept. 2001 – Jan. 2004 |
Dr. M. Divandari, Dr. AR. Mirhabaibi |
| 1 |
Production and Study of Tensile Strength of Continuous Carbon Fiber Reinforced Aluminum Composite |
Reza Akhlaghi |
IUST/Graduated |
Dr. M. Divandari |
International Conference:
Persian Scientific journal:
Published Books
| Publisher |
Title |
Year |
Co-writters |
Edition |
| Iran University of Science and Technology |
Metal Foams |
2008 and 2012 |
A. R. Vahid Golpayegani, H. R. Shahverdi |
First and second print |
| Bamdad Data Bank |
Polyethylene welding |
2009 and 2013 |
M. Shahedi Asl, M. R. Khadem Hosieni |
First and second print |
|
|
|
|
|
Internal Conference
| H.R. Pakzaman, A.R. Khavandi, M. Divandari, "A study on aluminum matrix composite reinforced with a two-dimensional network of interconnected steel wires fabricated by lost foam casting", New and Advanced Material International Congress, Islamic Azad University, Majlesi Branch, May 30-31, 2012, Azad University, Majlesi Branch, May 30-31, 2012 |
| H.R. Pakzaman, M. Divandari, A.R. Khavandi, "Effect of nickel coating on steel wire reinforcement on mechanical properties of aluminum matrix composites produced via lost foam casting", Proceedings of Iran International Aluminum Conference (IIAC2012), May 15-16, 2012, Arak, I.R. Iran, 2012 |
| Mohammad Khanbeiki, Mahdi Divandari, Morteza Tamizifar, Masoud Hassankhani, "Fading of inoculant particles in 8011 aluminum melt in a Twin Roll Casting production line", Proceedings of Iran International Aluminum Conference (IIAC2012) |
| M. Hemmati, M. Divandari, "The effects of oxide film characteristics on the bubble damage defect in Al5Mg and Al7SiMg alloys", Proceedings of Iran International Aluminum Conference (IIAC2012) |
| P. Sotudeh Bagha, M. Divandari, S. H. Razavi, "Effects of ARB cycles and holding temperature on density of aluminum foam", Proceedings of Iran International Aluminum Conference (IIAC2012) |
| Z. Nouri., M. Divandari, A. Kavandi, "The influence of nickel coating thickness on interlayer morphology of steel wires in A413 matrix composite via lost foam casting", The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), March 6-7, 2012, Tehran, Iran |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/divandari.jpg)