Showing 3 results for Supercapacitor
Z. Abasali Karaj Abad, A. Nemati, A. Malek Khachatourian, M. Golmohammad,
Volume 17, Issue 4 (12-2020)
Abstract
The graphene oxide -TiO2 (GO-TiO2) and pre-reduced graphene oxide -TiO2 (rGO-TiO2) nanocomposites were fabricated successfully by hydrothermal method. The microstructure of synthesized nanocomposites was investigated using field emission scanning electron microscopy (FESEM) equipped with energy dispersive spectroscopy (EDS) analysis. Moreover, galvanostatic charge/discharge (GCD), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) methods in three electrode system were applied to evaluate electrochemical properties. The results revealed that nanoparticles distributed more uniformly on graphene sheets, at lower concentrations of TiO2. The rGO-TiO2 and GO-TiO2 nanocomposites showed 224 and 32 F/g specific capacitance at 5 mV s-1 scan rate in 1 M KOH aqueous electrolyte, respectively. The pre-reduction of graphene oxide is the main reason for the better electrochemical performance of rGO-TiO2 nanocomposite compared to GO-TiO2 nanocomposite.
Ayça Tanrıverdi, Saniye Tekerek,
Volume 20, Issue 3 (9-2023)
Abstract
In this study, zinc chloride (ZnCl) was used as a precursor chemical to form boron reinforced zinc oxide (ZnO:B) particles. The supercapacitor performance of the reduced graphene oxide/boron reinforced zinc oxide (RGO/ZnO:B) composite electrodes produced by hydrothermal methods, and the impact of different boron doping ratios on the capacitance, were both examined. The characterization of the RGO/ZnO:B composites containing 5%, 10%, 15% and 20% boron by weight were performed using X-Ray diffraction (XRD) and scanning electron microscopy (SEM). The capacitance measurements of the electrodes produced were conducted in a 6 M KOH aqueous solution with a typical three electrode setup using Iviumstat potentiostat/galvanostatic cyclic voltammetry. The specific capacitance value of the 20% reinforced RGO/ZnO:B composite electrode was 155.88 F/g, while that of the RGO/ZnO composite electrode was 36.37 F/g. According to this result, the capacitance increased four-fold with a 20% boron doping concentration. Moreover, a longer cycle performance was observed for the RGO/ZnO:B electrodes with higher boron doping concentrations.
Zeinab Abbasali Karajabad, Adrine Malek Khachatourian, Mohammad Golmohammad, Ali Nemati,
Volume 22, Issue 1 (3-2025)
Abstract
Hybrid asymmetric supercapacitors using distinct cathode/anode materials offer enhanced energy density by expanding operational potential windows compared to symmetric configurations. In this work rGO/α-Fe₂O₃ and rGO/TiO₂ nanocomposites were synthesized via hydrothermal method for hybrid asymmetric supercapacitors applications. Field emission scanning electron microscope (FESEM) revealed uniform distribution of spherical α-Fe₂O₃ and TiO₂ nanoparticles on rGO sheets. The X-ray diffractometry (XRD) analysis confirmed the presence of the hematite and anatase in the rGO/α-Fe2O3 and rGO/TiO2 nanocomposites, respectively. Additionally, in the XRD spectra of both nanocomposites, a broad peak corresponding to the (002) crystalline planes of rGO was observed. Electrochemical testing showed specific capacities of 130 F/g (rGO/α-Fe₂O₃) and 253 F/g (rGO/TiO₂) at 5 mV/s in 1M KOH. The assembled hybrid asymmetric supercapacitors (rGO/α-Fe₂O₃//rGO/TiO₂) achieved a 1.6 V operational potential window. Power density and energy density of 1066 W kg-1 and 9.7 Wh kg-1 were achieved at a current density of 1 A/g, respectively.
