Iranian Journal of Materials Science and Engineering

Mendeley  

Zotero  

Kakaravada I, Mahamani A, Pandurangadu V. High Temperature Tensile Behavior of A356-TiB2/TiC in-situ Composites. IJMSE 2020; 17 (1) :56-68
URL: http://ijmse.iust.ac.ir/article-1-1547-en.html

In the present investigation, A356-TiB₂/TiC composites with a various weight fractions (0, 2.5, 5 and 7.5%) were synthesized through a K₂TiF₆-KBF₄-Graphite (C) reaction system. Formation of TiB₂ and TiC particulates and their distribution are confirmed by various characterization techniques. The tensile properties such as ultimate strength, yield strength, young's modulus and percentage of elongation in addition to their failure behavior of these composites were studied at ambiance and high temperatures (100, 200 and 300⁰C). The increment in the volume fraction of the composite raises the hardness and the enhancement of hardness was reported up to 49% at 7.5% reinforced composite due to the strengthening effect. The density and porosity of fabricated composites were investigated. The rise in volume fraction of reinforcement phase declines the density and increase the porosity of composites. Further, the ultimate strength, yield strength, young's modulus is declining by raising the temperature. Result analysis illustrates that the 7.5% reinforced composite retaining the ultimate strength up to 84.4% and the ductility is raised by 27% at 300⁰C. Yield strength and young's modulus are also retained 74.31% and 71.09% respectively at the similar material and experimental conditions. The fracture surface analysis of the composites illustrates that, the ductile nature of failure appearance microscopically with the formation of fine dimples and voids on fracture surface at elevated temperatures. Cleavage facets and tear crumples observation indicates the brittle kind of failure at the ambient temperature. Findings from the experimental study provide the tensile behavior of the composites at the regular working temperature of the automobile engine piston.