Personal Details                                                                                                 NAME: Ali                                                  SURNAME: Beitollahi ACCADEMIC STATUS: Professor in IUST  Fields of Research Interests Ceramics, Electro Ceramics, Magnetic Materials, Nano-Materilas.
Contact Address School of Metallurgy & Materials Engineering Iran University of Science and Technology (IUST), Narmak, Tehran, Iran Tel: +9821-7724540-550 , Ext: 2830 Fax: +9821-77240480 E-mail: Beitolla@iust.ac.ir
Publications A.Beitollahi, H.Hosseini-bay, H.Sarpoolaki" Synthesis and characterization of Al2O3-ZrO2 nanocomposite powder by sucrose process" j. of materials science.mater electron,2009 R.Sani,A.Beitollahi" Phase evolution and magnetic properties of Co/a/Fe2O3 powder mixtures with different molar ratio treated by mechanical alloying" j.of non-crystalline solids,2008 N.Gharehaghaji, M.A.Oghabian,S.Sarkar,F.Darki,A.Beitollahi" How size evaluation of lymph node is protocol dependent in MRI when using ultrasmall superparamagnetic iron oxide nanoparticles" J.of magnetism  and magnetic materials,2009   F. Shahri, A. Beitollahi, S. G. Shabestari, 6 others, “Stuructural characterization and magnetoimpedeance effect in amorphous and nanocrystalline Al-Ge substituted FeSiBNbCu ribbons”, J. of magnetism and magnetic materials (312), pp. 35-42, 2007.   R. Sani, A. Beitollahi, Yu. V. maksimur, I. P. suzdalev, “Snnthesis, phase formation study and magnetic properties of CoFe2O4 nanopowder prepared by mechanical milling”, J. of material science, 2007.   B. Alinejad, H. Sarpoolaky, A. Beitollahi, A. Saberi, Sh. Afshar, “Synthesis and characterization of nanocrystalline MgAl2O4 spinel via sucrose process”, Materials research bulletin, 2007.   F. Shahri, A. Beitollahi, “Effect of superheat treatment and quenching wheel speed on the structure and magnetic properties of Fe-Si-Nb-Cu-B-Al-Ge melt spun ribbons”, J. of non-crystalline solids, 2007.   R. Gholamipour, A. Beitollahi, V. K. Marghussian, T. Ohkubo, “Cu effect on coercivity and microstructural features in nanocrystalline Nd-Fe-Co-B annealed melt-spun ribbons”, Physica B 398, pp. 51-54, 2007.   F. Shahri, A. Beitollahi, S. Shabestari, 6 author, “Structural characterization and magneto impedance effect in amorphous and nanocrystalline AlGe-substituted FeSiBNbCu ribbons”, J. of materials and magnetic materials, 2006.   A. Beitollahi, R. Gholamipour, V. K. Marghussian, 7 other author, “Magnetic and structural properties of rapidly quenched Nd-Fe-Co-Ge-B alloys”, The physics of metals and Metallography, No. 102, pp. 24-31, 2006.   A. Beitollahi, S. M. Bafghi, S. M. A. Jazayeri, H. Ghanbari, “Synthesis and Characterization of nm-sized PbTiO3 crystallites”, J. of material sci., 2006.   A. Beitollahi, M. Abedini, “Effect of the level of the addition of Pb(Y0.5Nb0.5)O3 on the structure, microstructure and ferroelectric properties of PZT (53/47)”, j. of materials science, 2006.   M. Mirkazemi, V. K. Marghussian, A. Beitollahi, “Crystallisation behaviour, microstructure and magnetic properties of BaO-Fe2O3-B2O3-SiO2 glass ceramics”, Ceramics int., No.32, pp.43-51, 2006.   R. Gholamipour, A. Beitollahi, V. K. Marghussian, “Microstructure – magnetic properties relationships in nanocrystalline Nd-Fe-Co-Ge-B annealed ribbons”, Phys. Stat. Sol (a), 2006.   V. K. Marghusian, A. Beitollahi, M. Haghi, “The effect of SiO2 and Cr2O3 additions on the crystallization behaviour and magnetic properties of a B2O3-BaO-Fe2O3 glass”, Ceramics International, pp. 455-462, 2003.   مقالات ارائه شده در مجامع علمی – لاتین S.Mirzaei, A.Beitollahi,S.G.Shabestari, F.Shahri" Effect of heat treatment on the GMI effect and Domain structures of amorfous and nanocrystalline soft magnetic Fe72Si12.5B9Nb3 Cu1Al1.5Ge1 alloy"2nd int. cong. on nanotech. ( ICNN2008),2008 A.Beitollahi" A glance " size effect" in magnetic materials" Iran-India joint conference in nano-technology,2008 L.Samiee,A.Beitollahi,M.M.Akbarnejad" Evaluation of synthetic procedure of titania mesoporous powder from initial solution" Nano hybrid conference,2008 L.Samiee, A.Beiollahi, M.m.Akbarnejad, N.Faalnazari" Effect of sol treatment on the TiO2 mesostructure prepared by copolymer tempelating" Nano hybrid conference,2008 H.Golpayegani, A.Beitollahi" Synthesis and magnetic properties of CoFe2O4 nano powder prepared by mechanical milling"2nd int. congress on nanoscience and nanotechnology,2008   F. Shahri, A. Beitollahi, S. G. Shabestari, “Effect of processing parameters and additives on magnetic, microstructure and kinetic of nanocrystallization of Fe-Si-B-Nb-Cu alloy”, 3th student conference of nanotechnology, Shiraz, 2007.   A. Beitoollahi, F. Shahri, S. G.Shabestari, S.Kamali, “Effect of heat-treatment on the structure and magnetic properties of Al-Ge-added FINEMENT alloys”, Knowledge based industries & nanotechnology conference, 2007.   A. Beitollahi, R. Sani, Y. Manximof, P. Suzdalev, “Structural and magnetic properties study of CoFe2O4 nanopowder prepared by mechanical milling using metallic cobalt and hematite powder blend”, Nanotech, 2006.   B. Alinejad, H. Sarpoolaky, A. Beitollahi, S. Afshar, ”The low temperature synthesis of nanocrystalline MgAl2O4 spinel via sucrose process”, First int. congress on nanoscience and nanotechnology, Tehran University, 2006.   A. Beitollahi, S. A. M. Haghgo, “Synthesis and characterization of ceria nanopowder by solution combustion method”, Nano, India-Bangalore, 2006.   A. Beitollahi, F. Shahri, S. G. Shabestari, “Structural and magnetic properties relationship in amorphous and nanocrystalline Al-Ge substituted FeSiBNbCu ribbons”, Nano, India-Bangalore, 2006.   A. Beitollahi, R. Gholamipour, V. K. Marghussian, T. Ohkubo, K. Hono, “Near atomic scale analysis of nanocrystalline NdFeCoMb (M = Ga, Ge) alloys: an improved understanding of microstructure-Magnetic properties relationship”, Nano, India-Bangalore, 2006.   A. Beitollahi, S. Jafari, M. A. Oghabian, S. Sarkar, “Synthesis and characterization of Fe3-xZnxO4 (x = 0 and 0.2) Nanoparticles for medical applications”, Int. Conf. on Bio-Nanotechnology, 2006.   S. M. Rezayat, S. M. Hosseinalipour, S. G. Ghamami, A. Khalilzadeh, E. Biazar, B. Beitollahi, “A Comparative study of liver toxicity effects of normal and reduced size (C100)”, Int. Conf. on Bio-Nanotechnology, 2006.   Taherkhani, Mosadeghi, Beitollahi, Hosseinalipour, “Biocompatible coating superparamagnetic iron oxide nanoparticle for medical application”, Nanobiotechnology, 2006.   Rezaei, Hosseinalipour, Ghamami, Khalizadeh, Biazar, beitollahi, “A comparative study of liver toxicity effects of normal and reduced size acetaminophen crystallites on rats”, Int. conf. on bio-nanotechnology, 2006.   R. Shahkooei, A. Beitollahi, H. Sarpoolaki, H. Ahmadi, S. Sotudeh, “Synthesis of Al2O3-ZrO2 nanocomposite powder by solution combustion synthesis method”, 1st Iran-Russia, 2005.   H. Hosseinibay, A. Beitollahi, H. Sarpoolaki, H. Ahmadi, S. Sotudeh, “Synthesis of Al2O3-ZrO2 nanocomposite powder by a modified sol-gel process”, 1st Iran-Russia, 2005.   R. Gholamipour, A. Beitollahi, T. Ohkubo, V. K. Marghussian, K. Hono, “Effect of Ge addition on the magnetic properties and microstructure of nanocrystalline Nd-Fe-Co-B annealed ribbons”, 1st Iran-Russia, Russia, 2005.   N. Kudrevatykh, S. Andrerv, A. Beitollahi, V. K. Marghussian, “Structural and magnetic properties of rapidly quenched Nd-Fe-Co-Ge-B and Y-Fe-B alloys of 2-14-1 phase compositions”, 1st Iran-Russia, 2005.   R. Gholamipour, A. Beitollahi, T. Ohkubo, V. K. Marghussian, K. Hono, “Microstructural study of Nd-Fe-Co-M-B (M=Ga, Ge) nanocrystalline ribbons and its relation to coerdirity”, 1st Iran-Russia, Russia, 2005.   R. Sani, A. Beitollahi, Yu. V. Maksimov, I. P. Suzdalev, M. Sh. Bafghi, “Synthesis and characterization of CoFe2O4 nanoparticles prepared by high energy milling”, 1st Iran-Russia, 2005.   F. Shahri, S. E. Roozmeh, S. M. Mohseni, A. Beitollahi, S. G. Shabestari, “Structural, magnetic properties and MI effect in amorphous and nanocrystalline AlGe-Substituted FeSiBNbCu ribbons”, 1st Iran-Russia, 2005.   A. Beitollahi, M. Moravej, “Phase formation study of PZT nanopowder by mechanical activation method at various conditions”, INCOME, 2003.