Personal Details NAME: Jafar SURNAME: Javadpour ACCADEMIC STATUS : Professor in IUST Fields of Research Interests: Ceramics, Microstructure Property Relationships in Ceramics
Contact Address School of Metallurgy & Materials Engineering Iran University of Science and Technology (IUST), Narmak, Tehran, Iran Tel: +9821-7724540-550 Fax: +9821-77240480 E-mail: Javadpourj@iust.ac.ir
Publications A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”Viscoelastic properties of multi-walled carbon nanotube composites with different nanotube content”, J. of Nano Research, vol. 13, 2011. A. Montazeri, J. Javadpour, A. Khavandi, A. Tcharkhtchi, and Mohajeri,”Mechanical Properties of multi-walled carbon nanotube/epoxy composites”, Materials and Design, vol.31, 2010. A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”The effect of curing cycle on the mechanical properties of mwnt/epoxy nanocomposites”, Int. J. of Polymer Anal. Charac.,vol. 15, 2010. N. Abudzadeh, M. Imani, M Shokrgozar, A. Khavandi, J. Javadpour,”Fabrication and characterization of poly (D,L-lactide-co-glycolide)/hydroxyapatite nanocomposite scaffolds for bone tissue regeneration”, J. of Biomedical Materials Research Part A, vol. 94A, issue 1, 2010. L. Montazeri, J. Javadpour, M.A. Shokrgozar, S. Bonakdar, and S Javadian,”Hydrothermal synthesis of hydroxyapatite and fluohydroxyapatite nano-size powder”, Biomedical Materials, vol. 5, no. 4, 2010. A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”Viscoelastic properties of multi-walled carbon nanotube composites using two different curing cycles”, Materials and Design, vol. 31, 2010. A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”Viscoelastic properties of multi-walled carbon nanotube/epoxy composites with different nanotube content”, Proceeding of the DSL conference, Paris, France, 2010. M. Ebrahimi-Basabi, J. Javadpour, H. Rezaie, and M. Goodarzi, ”Mechanochemical Synthesis of Alumina Nanoparticles”, Iranian J. of Materials Science & Engineering, Vol. 6, No. 1, 2009 L. Nikzad, A. Mirhabibi, M. Vaezi, and J. Javadpour, ”Tape Casting of Graphite in non-aqueous media”, Materials & Design, Vol. 30, 2009 Z. Salehpour, A.R. Mirhabib, J. Javadpoor, R. Aghababazadeh", A study on the effect of three types of deflocculants and the increase in the pH on the rheological behaviour of nano carbon suspensions", J. of Nanoscience and Nanotechnology, Vol. 8, 1-7, 2008 M. Ebrahimi, J. Javadpoor, H. Razaie, M. Goodarzi, "Mechanochemical synthesis of alumina-zirconia nanocomposite powder", J. of Advances in Applied Ceramics, Vol. 107, No. 6, 2008 A.M. Zahedi, H.R. Rezaie, J. Javadpoor, M. Mazaheri, M.G. Haghighi, "Processing and impact behaviour of Al/SiCp composites fabricated by the pressureless melt infiltration method", Ceramics international, 2008 S. Mobini, J. Javadpour, M. Hosseinalipour, A. Khavandi, H.R. Rezaie, M. Ghazi-Khansari, "Synthesis and characterization of gelatin-nano hydroxyapatite composite scaffolds for bone tissue engineering", J. of Advandes in applied ceramics, Vol. 107, No. 1, 2008 S.Mollazadeh, J. Javadpour, A.R. Khavandi, "Biomimetic synthesis and mechanical properties of hydroxyapatite/poly (Vinil Alcohol) nanocomposites ", J. of Advances in applied ceramics, Vol. 106, No. 4, 2007 S.Mollazadeh, J. Javadpour, A. Khavandi, “In situ synthesis and characterization of nano-size hydroxypatite in poly(Vinyl Alcohol) matrix ", J. of Ceramics international , Vol. 33, Issue 8, 2007 S.Sh. Hosmaigohar, M.A. Shokrgozar, J. Javadpour, A. Khavandi, A. Yari Sadi, "Effect of reinforcement particle size on invitro behaviour of b -tricalcium phosphate-reinforced high-density polyethylene: A nord orthopedic composite ", J. of biomedicals materials res., 2006 A. Yari Sadi, M.A. Shokrgozar, S.Sh. Homaiegohar, M. Hosseinalipour, A. Khavandi, J. Javadpour, "The effect of partially stabilized Zirconia on the biological properties of HA/HDPE composites in vitra", J. of materials Sci., 2006 M.N. Khezrabadi, J. Javadpour, H.R. Rezaei, R. Naghizadeh, “The effect of additives on the properties and microstructures of Al2O3-C refractories ", J. of materials science, 2006 S.Sh. Homaiegohar, A. Yari Sadi, J. Javadpour, A. Khavandi, "The effect of reinforcement volume fraction and particle size on the mechanical properties of b -tricalcium phosphate-high density polyethylene composites ", J. of the Eur. Cer. Soc., No.26, 2006, pp. 273-278 R.Shahbazi, J. Javadpour, A.R. Khavandi, “Effect of nano-sized reinforcement particles on mechanical properties of high density polyethylene-hydroxy apitite composites ", Advances in applied ceramics, No.5, 2006 H.Baradari, H. Amani, S. Karimi, H. R. Rezaie, J. Javadpour, H. Sarpoolaky, "The effect of raw materials concentration on hydroxyapatite powder characteristics and sintering behaviour ", Iranian J. of mat. Sci. and eng., No.1, 2006 S.Sh. Homaiegohar, M. A. Shokrgozar, A. Yari Sadi, A. Khavandi, J. Javadpour, M. Hosseinalipour, " In vitro evaluation of biocompatibility of beta-tricalcium phosphate-reinforced high-density polyethylene on orthopedic composite ", J. of biomedical materials res. Part : A, No.75A, 2005, pp. 14-22 J. Javadpour, K. Sakhai, A.A. Masihianpour, “Tape casting of Non-Aqueous Hydroxyapatite slips ", IJMSE, No.4, 2004 J. Javadpour, A. Yusefi, “Effect of sintering conditions on microstructure and the superconducting properties of Yba2Cu3O7-X ", IJE Transactions, 2003 A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhtchi,”A comparative study on the thermo mechanical properties of various multi-walled carbon nanotube/epoxy composites”, DSL conference, Algarve, Portugal, 2011 (accepted for oral presentation). A. Montazeri, A. Khavandi, J. javadpour, and A. Tcharkhtchi,”Viscoelastic properties of multi-walled carbon nanotube/epoxy composites with different nanotube content”, Proceeding of the DSL conference, Paris, France, 2010. A. Montazeri, J. Javadpour, A. Khavandi, and A. Tcharkhtchi,”Determination of William-Landel-Ferry (WLF) in multi-walled carbon nanotube/epoxy composites”, Proceeding of AMPT conference, Paris, France, 2010. F. Foroutan, J. Javadpour, A. Khavandi, M. Atai, and H.R. Rezaie,”Mechanical properties of dental composite materials reinforced with nano-size Al2O3 particles”, Proceeding of the International conference on Nanotechnology: Fundamentals and Applications, Ottawa, Canada, 2010 A. Montazeri, J. Javadpour, A. Khavandi, and A. Tcharkhtchi,”Determination of William-Landel-Ferry (WLF) in multi-walled carbon nanotube/epoxy composites”, Proceeding of AMPT conference, Paris, France, 2010. Z. Salehpour, A.R. Mirhabibi, J. Javadpour, and R. Babazadeh, ”The effect of three different dispersants on the viscosity and stability of nanosize black carbon suspensions”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009 H. Bandeghani, K. Masami, H.R. Rezaii, and J. javadpour, ”An investigation on the effect of starch size and pressing condition on the pore network in the apatitic scaffold”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009 A. Montazeri, A. Khavandi, J. Javadpour, and A. Tcharkhchi, ”An investigation on the effect of sonication time and dispersing medium on the mechanical properties of MWNTS in MWNT/LY 560 nanocomposites” Proceeding of the International Conference on Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia, 2009 L. Montazeri, J. Javadpour and M.A. Shokrgozar, ”Hydrothermal synthesis and characterization of hydroxyapatite, fluorhydroxyapatite and fluorapatite powders,” Proceeding of the International Conference on Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia, 2009 L. Montazeri, J. Javadpour and M.A. Shokrgozar, and S. Bankdar” The effect of fluoride content on the in vitro behavior of hydrothermally synthesized nano size fluorhydroxyapatite powders,” Proceeding of the 16th Iranian conference on Biomedical Engineering, Tehran, Iran, 2009 A. Masihianpour, A. Nematti, J. Javadpour, and K. Arzani,”The effect of processing parameters on the physical properties of the nanosize hydroxyapatite powders synthesized by hydrothermal method”, Proceeding of the 16th Iranian conference on Biomedical Engineering, Tehran, Iran, 2009 A. Masihianpour, A. Nematti, J. Javadpour, and K. Arzani, ”The effect of aging parameters on the properties of the nanosize hydroxyapatite powder synthesized by hydrothermal method”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009 L. Montazeri, J. Javadpour, and M.A. Shokrgozar, “The effect of fluride concentaration on the physical properties of the nanosize fluroapatite powder synthesized by hydrothermal method”, Proceedings of the 7th National Conference on Ceramics, Shiraz-Iran, 2009 Z. Salehpour, A.R. Mirhabibi, J. Javadpour, R. Aghababazadeh", A study on the effect of three types of deflocculants and the increase in the pH on the rheological behaviour of carbon black suspensions", 2nd International meeting on developments in materials, processes and applications of nanotechnology, 2008 S. Mollazadeh, J. Javadpour, A. Khavandi, R. Rezaii, "Characterization of the In Situ synthesized hydroxyapatite powders in the presence of polymer", presented at the 13th national conference on biomedical engineering, Tehran-Iran, 2007 S. Mollazadeh, J. Javadpour, A.R. Khavandi, "Mechanical Properties of the In Situ Processed HAp/PVA Nanocomposites", Presented at the First International Congress on Nanoscience and Nanotechnology, Tehran-Iran, 2007 M. PourAli, A. Mirhabibi, J. Javadpour, "A new procedure for the synthesis of alpha Aluminium", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007 S.M. Mahmoodisepehr, V. Margusian, J. Javadpour, H. Kazemian, M.R. Khani, "preparation of a new glass ceramic composition in the SiO2-PbO-B2O3-K2O-CaO-ZrO2-TiO2 system and investigating it,s crystallization and microstructure", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007 Z. Salehpour, A. Mirhabibi, J. Javadpour, "Rheological behaviour of nanosize carbon supensions ", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007 S. M. Mahmoudysepehr, V. Margussian, J. Javadpour, "Development of a new Zirconoloite-based glass ceramic for immobilization of radioactive wastes", Proceedings of Materials Science & Technology Conference, Detroite, Michigan, 2007 M. Ebrahimi, J. Javadpour, H.R. Rezaie, "Mechanochemical synthesis of Alumina-Zirconia Nanocomposites", Presented at the 6th National Conference on Ceramics, Karaj-Iran, 2007 N. Aboudzadeh, A. Khavandi, J. Javadpour, M. Shokrgozar, M. Imani, "The effect of solvent type on the properties of poly (Lactide-co-Glycolide)/nanohydroxyapatite composite scaffolds", Proceedings of the 11th Annual Conference of Metallurgical Society, Isfahan-Iran, 2007 Z. Salehpour, A.R. Mirhabibi, J. Javadpour-R. Aghababazadeh, “Study of the effects of pH and increasing solid concentration on the rheological behaviour of carbon black/SiC suspensions ", Nanotech in sight, 2007 Z. Salehpour, A.R. Mirhabibi, J. Javadpour, R. Aghababazadeh, " The effect of pH and solid concentration on the rheological behaviour of carbon black suspensions ", Proceedings of Carbon 2007 Conference,Seattle, Washington, 2007 M. Esfidari, A. Mirhabibi, S. Rasouli, J. Javadpour, “Synthesis of gold pearlescent pigment based on mica-Tin dioxide ", 1st int. and 2nd national conf. on color sci. and tech., 2006