|
| Publications |
| Roghani, H. , Borhani, E. , Shams, S.A.A. , Lee, C.S. , Jafarian, H.R., " Effect of concurrent accumulative roll bonding (ARB) process and various heat treatment on the microstructure, texture and mechanical properties of AA1050 sheets", Journal of Materials Research and Technology, 2022, 18, pp. 1295–1306 |
| Sabzi, M. , Mousavi Anijdan, S.H. , Chalandar, A.R.B. , ... Jafarian, H.R. , Eivani, A.R., " An experimental investigation on the effect of gas tungsten arc welding current modes upon the microstructure, mechanical, and fractography properties of welded joints of two grades of AISI 316L and AISI310S alloy metal sheets", Materials Science and Engineering Athis link is disabled, 2022, 840, 142877 |
| Falekari, A. , Jafarian, H.R. , Eivani, A.R. , Habibnejad-korayem, M. , Heidarzadeh, A., " Friction stir processing of thick tempered martensitic steels: Correlation between microstructure and mechanical properties", Materials Science and Engineering Athis link is disabled, 2022, 836, 142698 |
| Javidani, M. , Heidarzadeh, A. , Barenji, R.V. , Paidar, M. , Jafarian, H.R., " Unraveling the Relationship between Microstructure and Mechanical Properties of Friction Stir‐Welded Copper Joints by Fuzzy Logic Neural Networks", Crystalsthis link is disabled, 2022, 12(2), 216 |
| Rivaz , Mousavi Anijdan, S.H. , Moazami-Goudarzi, M. , Ghohroudi, A.N. , Jafarian, H.R., " Damage causes and failure analysis of a steam turbine blade made of martensitic stainless steel after 72,000 h of working", Engineering Failure Analysisthis link is disabled, 2022, 131, 105801 |
| Hedayati Marzbali, M. , Jafarian, H.R. , Bokaei, S. , ... Momeni, A. , Eivani, A.R., " On the microstructure and mechanical properties of FeCoCrCuNi high entropy alloy during hot compression", Journal of Materials Research and Technology, 2022, 16, pp. 1747–1760 |
| Khajeh, R. , Jafarian, H.R. , Jabraeili, R. , ... Park, N. , Heidarzadeh, A., " Strength-ductility synergic enhancement in friction stir welded AA2024 alloy and copper joints: Unravelling the role of Zn interlayer's thickness", Journal of Materials Research and Technology, 2022, 16, pp. 251–262 |
| Heidarzadeh, A. , Mohammadzadeh, R. , Jafarian, H.R. , Pruncu, C.I. , Simar, A., " Role of geometrically necessary dislocations on mechanical properties of friction stir welded single-phase copper with medium stacking fault energy", Journal of Materials Research and Technology, 2022, 16, pp. 194–200 |
| Roghani, H. , Borhani, E. , Shams, S.A.A. , Lee, C.S. , Jafarian, H.R., " On the microstructure, texture and mechanical properties through heat treatment in Al–CuO nanocomposite fabricated by Accumulative Roll Bonding (ARB)", Materials Science and Engineering A, 2021, 828, 142080 |
| Mohseni, M. , Eivani, A.R. , Vafaeenezhad, H. , ... Salehi, M.T. , Zhou, J., " An experimental and theoretical investigation of the effect of second-phase particles on grain growth during the annealing of hot-rolled AZ61 magnesium alloy", Journal of Materials Research and Technology, 2021, 15, pp. 3585–3597 |
| Koohdar, H. , Nili-Ahmadabadi, M. , Kalahroudi, F.J. , Jafarian, H.R. , Langdon, T.G., " Effect of post-deformation annealing on the microstructure and mechanical behavior of an Fe–Ni–Mn steel processed by high-pressure torsion", Journal of Materials Research and Technology, 2021, 15, pp. 1537–1546 |
| Reza Tabrizi, T. , Sabzi, M. , Mousavi Anijdan, S.H. , ... Park, N. , Jafarian, H.R., " Comparing the effect of continuous and pulsed current in the GTAW process of AISI 316L stainless steel welded joint: microstructural evolution, phase equilibrium, mechanical properties and fracture mode", Journal of Materials Research and Technology, 2021, 15, pp. 199–212 |
| Mousavi Anijdan, S.H. , Arab, G. , Sabzi, M. , ... Eivani, A.R. , Jafarian, H.R., " Sensitivity to hydrogen induced cracking, and corrosion performance of an API X65 pipeline steel in H2S containing environment: influence of heat treatment and its subsequent microstructural changes", Journal of Materials Research and Technology, 2021, 15, pp. 1–16 |
| Hakakzadeh, M. , Jafarian, H.R. , Seyedein, S.H. , ... Park, N. , Heidarzadeh, A., " Production of Ti-CNTs surface nanocomposites for biomedical applications by friction stir processing: Microstructure and mechanical properties", Materials Letters, 2021, 300, 130138 |
| Howeyze, M. , Eivani, A.R. , Ghosh, M. , Jafarian, H.R., " Effects of annealing temperature on microstructure and mechanical behavior of conventionally and severely deformed Fe–24Ni steel by accumulative roll bonding", Journal of Materials Research and Technology, 2021, 14, pp. 2428–2440 |
| Khajeh, R. , Jafarian, H.R. , Seyedein, S.H. , ... Kim, Y. , Heidarzadeh, A., " Microstructure, mechanical and electrical properties of dissimilar friction stir welded 2024 aluminum alloy and copper joints", Journal of Materials Research and Technology, 2021, 14, pp. 1945–1957 |
| Mohammadi, H. , Eivani, A.R. , Seyedein, S.H. , Ghosh, M. , Jafarian, H.R., " An investigation of hot deformation behavior of Zn–22Al alloy and development of its processing maps during isothermal compression", Journal of Materials Research and Technology, 2021, 14, pp. 507–520 |
| Jafarian, H.R. , Zeng, Y. , Anijdan, S.H.M. , Eivani, A.R., " The effect of accumulative roll bonding on the precipitation behavior of a single step artificially aged Al–Ag-Sc alloy", Materials Science and Engineering A, 2021, 823, 141769 |
| Sabzi, M. , Mousavi Anijdan, S.H. , Eivani, A.R. , Park, N. , Jafarian, H.R., " The effect of pulse current changes in PCGTAW on microstructural evolution, drastic improvement in mechanical properties, and fracture mode of dissimilar welded joint of AISI 316L-AISI 310S stainless steels", Materials Science and Engineering A, 2021, 823, 141700 |
| Eivani, A.R. , Vafaeenezhad, H. , Jafarian, H.R. , Zhou, J., " A novel approach to determine residual stress field during FSW of AZ91 Mg alloy using combined smoothed particle hydrodynamics/neuro-fuzzy computations and ultrasonic testing", Journal of Magnesium and Alloys, 2021, 9(4), pp. 1304–1328 |
| Mousavi Anijdan, S.H. , Sadeghi-Nezhad, D. , Lee, H. , ... Jafarian, H.R. , Eivani, A.R., " TEM study of S' hardening precipitates in the cold rolled and aged AA2024 aluminum alloy: influence on the microstructural evolution, tensile properties & electrical conductivity", Journal of Materials Research and Technology, 2021, 13, pp. 798–807 |
| Eivani, A.R. , Tabatabaei, F. , Khavandi, A.R. , ... Jafarian, H.R. , Zhou, J., " The effect of addition of hardystonite on the strength, ductility and corrosion resistance of WE43 magnesium alloy", Journal of Materials Research and Technology, 2021, 13, pp. 1855–1865 |
| Forouzanmehr, N. , Jafarian, H.R. , Samadi-khoshkhoo, M. , Bönisch, M. , Nili-Ahmadabadi, M., " Nanostructural Evolution and Deformation Mechanisms of Severely Deformed Pure Fe", Metals and Materials International, 2021, 27(6), pp. 1798–1807 |
| Eivani, A.R. , Shojaei, A. , Park, N. , Jafarian, H.R., " Fabrication of Cu-CuG nanocomposites with enhanced mechanical strength and reduced electrical resistivity", Journal of Materials Research and Technology, 2021, 11, pp. 650–666 |
| Jafarian, H.R. , Mahdavian, M.M. , Shams, S.A.A. , Eivani, A.R., " Microstructure analysis and observation of peculiar mechanical properties of Al/Cu/Zn/Ni multi-layered composite produced by Accumulative-Roll-Bonding (ARB)", Materials Science and Engineering A, 2021, 805, 140556 |
| Koohdar, H. , Hakimipour, P. , Jafarian, H.R. , Langdon, T.G. , Nili-Ahmadabadi, M., " Engineering mechanical properties by controlling the microstructure of an Fe–Ni–Mn martensitic steel through pre-cold rolling and subsequent heat treatment", Materials Science and Engineering A, 2021, 804, 140760 |
| Koohdar, H. , Nili-Ahmadabadi, M. , Javadzadeh Kalahroudi, F. , Jafarian, H.R. , Langdon, T.G., " The effect of high-pressure torsion on the microstructure and outstanding pseudoelasticity of a ternary Fe–Ni–Mn shape memory alloy", Materials Science and Engineering A, 2021, 802, 140647 |
| Eivani, A.R. , Mirghasemi, S.M. , Seyedein, S.H. , Zhou, J. , Jafarian, H.R., " Simulation of deformation and fracture initiation during equal channel angular pressing of AZ31 magnesium alloy with covered tube casing", Journal of Materials Research and Technology, 2021, 12, pp. 1913–1923 |
| Masoudpanah, S.M. , Koohdar, H.R. , Jafarian, H.R. , Eivani, A.R., " The effects of cold rolling and aging conditions on the microstructure and magnetic properties of a semi-hard Fe-Mo-Ni magnetic alloy", Journal of Materials Research and Technology, 2021, 12, pp. 521–529 |
| Jabraeili, R. , Jafarian, H.R. , Khajeh, R. , ... Heidarzadeh, A. , Eivani, A.R., " Effect of FSW process parameters on microstructure and mechanical properties of the dissimilar AA2024 Al alloy and 304 stainless steel joints", Materials Science and Engineering A, 2021, 140981 |
| Charandabi, F.K. , Jafarian, H.R. , Mahdavi, S. , Javaheri, V. , Heidarzadeh, A., " Modification of microstructure, hardness, and wear characteristics of an automotive-grade Al-Si alloy after friction stir processing", Journal of Adhesion Science and Technology, 2021 |
| Jafarian, H.R. , Sabzi, M. , Mousavi Anijdan, S.H. , Eivani, A.R. , Park, N., " The influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel", Journal of Materials Research and Technology, 2021, 10, pp. 819–831 |
| Eivani, A.R. , Shojaei, A. , Salehi, M.T. , Jafarian, H.R. , Park, N., " On the evolution of microstructure and fracture behavior of multilayered copper sheet fabricated by accumulative roll bonding", Journal of Materials Research and Technology, 2021, 10, pp. 291–305 |
| Sadeghi-Nezhad, D. , Mousavi Anijdan, S.H. , Lee, H. , ... Nayyeri, M.J. , Jafarian, H.R., " The effect of cold rolling, double aging and overaging processes on the tensile property and precipitation of AA2024 alloy", Journal of Materials Research and Technology, 2020, 9(6), pp. 15475–15485 |
| AR Eivani, A Shojaei, MT Salehi, HR Jafarian, N Park, "On the evolution of microstructure and fracture behavior of multilayered copper sheet fabricated by accumulative roll bonding", Journal of Materials Research and Technology, 2020 |
| H Koohdar, M Nili-Ahmadabadi, FJ Kalahroudi, HR Jafarian, TG Langdon, "The effect of high-pressure torsion on the microstructure and outstanding pseudoelasticity of a ternary Fe-Ni-Mn shape memory alloy", Materials Science and Engineering: A, 140647, 2020 |
| HR Jafarian, M Sabzi, SHM Anijdan, AR Eivani, N Park, "Influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel", Journal of Materials Research and Technology, 2020 |
| HR Jafarian, MM Mahdavian, SAA Shams, AR Eivani, "Microstructure analysis and observation of peculiar mechanical properties of Al/Cu/Zn/Ni multi-layered composite produced by Accumulative-Roll-Bonding (ARB)", Materials Science and Engineering: A, 140556, 2020 |
| D Sadeghi-Nezhad, SHM Anijdan, H Lee, W Shin, N Park, MJ Nayyeri, ..., "The effect of cold rolling, double aging and overaging processes on the tensile property and precipitation of AA2024 alloy", Journal of Materials Research and Technology 9 (6), 15475-15485, 2020 |
| HR Jafarian, SHM Anijdan, H Miyamoto, "Observation of low temperature superplasticity in an ultrafine grained AA6063 alloy", Materials Science and Engineering: A 795, 140015, 2020 |
| AR Eivani, HR Jafarian, J Zhou, "Simulation of peripheral coarse grain structure during hot extrusion of AA7020 aluminum alloy", Journal of Manufacturing Processes 57, 881-892, 2020 |
| M Howeyze, AR Eivani, H Arabi, HR Jafarian, N Park, "The effect of amount of pre-strain using equal channel angular pressing on softening response of AA5052 alloy", Journal of Materials Research and Technology, 2020 |
| AB Barenji, AR Eivani, HR Jafarian, N Park, "Effects of hot forming cold die quenching and solution treatment on formability and pressing load during equal channel angular deformation of AA2024 aluminum alloy", Journal of Materials Research and Technology, 2020 |
| HG Tehrani-Moghadam, HR Jafarian, A Heidarzadeh, AR Eivani, H Do, ..., "Superior mechanical properties in high-Ni transformation induced plasticity steels after friction stir welding", Journal of Materials Research and Technology, 2020 |
| RD Bourkhani, AR Eivani, HR Nateghi, HR Jafarian, "Effects of pin diameter and number of cycles on microstructure and tensile properties of friction stir fabricated AA1050-Al2O3 nanocomposite", Journal of Materials Research and Technology, 2020 |
| H Jafarian, H Miyamoto, "Tailoring microstructure and mechanical properties of nano/ultrafine grained AA6063 alloy processed by accumulative roll bonding process", Iranian Journal of Materials Science and Engineering 17 (1), 1-10, 2020 |
| H Abolfathi, HR Jafarian, H Arabi, N Park, AR Eivani, "Microstructural development and its effects on tensile properties of a high Ni TRIP steel produced by repetitive corrugation and straightening via rolling (RCSR)", Journal of Materials Research and Technology 9 (2), 2279-2288, 2020 |
| AB Barenji, AR Eivani, M Hasheminiasari, HR Jafarian, N Park, "Effects of hot forming cold die quenching and inter-pass solution treatment on the evolution of microstructure and mechanical properties of AA2024 aluminum alloy after equal …, Journal of Materials Research and Technology 9 (2), 1683-1697, 2020 |
| SH Zadeh, HR Jafarian, N Park, AR Eivani, "Regulating of tensile properties through microstructure engineering in Fe-Ni-C TRIP steel processed by different strain routes of severe deformation", Journal of Materials Research and Technology, 2020 |
| HG Tehrani-Moghadam, HR Jafarian, A Heidarzadeh, AR Eivani, H Do, ..., "Achieving extraordinary strength and ductility in TRIP steels through stabilization of austenite up to 99.8% by friction stir welding", Materials Science and Engineering: A 773, 138876, 2020 |
| A Pourfarokh, HR Jafarian, AR Eivani, Y Palizdar, N Park, "Regulating tensile properties through bainitic transformation temperature in a hot-rolled δ-TRIP steel", Materials Science and Technology 36 (2), 223-232, 2020 |
| N Forouzanmehr, HR Jafarian, M Samadi-khoshkhoo, M Bönisch, ..., "Nanostructural Evolution and Deformation Mechanisms of Severely Deformed Pure Fe", Metals and Materials International, 1-10, 2020 |
| Javadzadeh Kalahroudi, F., Koohdar, H., Jafarian, H.R., (...), Langdon, T.G., Nili-Ahmadabadi, M., "Corrigendum to “On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion” (Materials Science & Engineering A (2019) 749 (27–34), (S0921509319301637), (10.1016/j.msea.2019.02.002))", Materials Science and Engineering A,767,138213, 2019 |
| Sadeghinia, H., Jafarian, H.R., Salehi, M.T., Eivani, A.R., "Comprehensive investigation on wear and microstructure development in Al/ti ultrafine grained multi-layered composite produced by Accumulative Roll Bonding (ARB)", Materials Research Express,6(11),116572, 2019 |
| Arjomandi, S., Jafarian, H.R., Park, N., "A substantial improvement of tensile properties through microstructure engineering in a high Ni-0.2C TRIP steel under severe plastic deformation", Materials Characterization,155,109826, 2019 |
| Baghbani Barenji, A., Eivani, A.R., Hasheminiasari, M., Park, N., Jafarian, H.R., "Application of hot forming cold die quenching for facilitating equal channel angular pressing of AA2024 aluminum alloy", Journal of Alloys and Compounds, 791, pp. 265-277, 2019 |
| Ondicho, I., Choi, M., Choi, W.-M., (...), Hong, S.I., Park, N., "Experimental investigation and phase diagram of CoCrMnNi–Fe system bridging high-entropy alloys and high-alloyed steels", Journal of Alloys and Compounds, pp. 320-327, 2019 |
| Javadzadeh Kalahroudi, F., Koohdar, H., Jafarian, H.R., (...), Langdon, T.G., Nili-Ahmadabadi, M., "On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion", Materials Science and Engineering A, 749, pp. 27-34, 2019 |
| Derakhshan, J.F., Parsa, M.H., Jafarian, H.R., "Microstructure and mechanical properties variations of pure aluminum subjected to one pass of ECAP-Conform process", Materials Science and Engineering A, 747, pp. 120-129, 2019 |
| Mousavi Anijdan, S.H., Sabzi, M., Asadian, M., Jafarian, H.R., "Effect of sub-layer temperature during HFCVD process on morphology and corrosion behavior of tungsten carbide coating, International Journal of Applied Ceramic Technology16(1), pp. 243-253, 2019 |
| Hashemipour, S., Eivani, A.R., Jafarian, H.R., Naseri, M., Park, N., "Microstructure and mechanical properties development of nano/ultrafine grained AISI 316L austenitic stainless steel prepared by repetitive corrugation and straightening by rolling (RCSR)", Materials Research Express5(12),126519, 2018 |
| Mousavi Anijdan, S.H., Jafarian, H.R., Park, N., "The effect of severe plastic deformation and annealing conditions on mechanical properties and restoration phenomena in an ultrafine-grains Fe-28.5%Ni steel", Philosophical Magazine, 98(27), pp. 2457-2480, 2018 |
| Howeyze, M., Eivani, A.R., Arabi, H., Jafarian, H.R., "Effects of deformation routes on the evolution of microstructure, texture and tensile properties of AA5052 aluminum alloy", Materials Science and Engineering A, 732, pp. 120-128, 2018 |
| Zangeneh Najafi, S., Momeni, A., Jafarian, H.R., "Flow curves and microstructure of K107 tool steel subjected to compression tests at elevated temperatures", Materials Science and Engineering A, 732, pp. 78-90, 2018 |
| Mirghasemi, S.M., Eivani, A.R., Seyedein, S.H., Jafarian, H.R., "A comparison between routine vs. normalized Cockroft-Latham fracture criteria for prediction of fracture during equal channel angular pressing", Engineering Fracture Mechanics, 199, pp. 721-729, 2018 |
| Howeyze, M., Arabi, H., Eivani, A.R., Jafarian, H.R., "Strengthening of AA5052 aluminum alloy by equal channel angular pressing followed by softening at room temperature", Materials Science and Engineering A, 2018 |
| Tehrani-Moghadam, H.G., Jafarian, H.R., Salehi, M.T., Eivani, A.R., "Evolution of microstructure and mechanical properties of Fe-24Ni-0.3C TRIP steel during friction stir processing", Materials Science and Engineering A, 2018 |
| Najafi, S., Eivani, A.R., Samaee, M., Jafarian, H.R., Zhou, J., "A comprehensive investigation of the strengthening effects of dislocations, texture and low and high angle grain boundaries in ultrafine grained AA6063 aluminum alloy", Materials Characterization, 2018 |
| Yousefi, A., Eivani, A.R., Boutorabi, S.M.A., Jafarian, H.R., "Effect of pre-deformation cooling rate on the age-hardening response of ultrafine grained AA6063", Materials Science and Engineering A, 2018 |
| Derakhshan, J.F., Parsa, M.H., Ayati, V., Jafarian, H., "Estimation of dislocations density and distribution of dislocations during ECAP-Conform process", AIP Conference Proceedings, 2018 |
| Lavasani, N.N., Jafarian, H.R., Arabi, H., Park, N., "Texture analysis and development of ultrafine grained structure during thermo-mechanical treatment in a gamma-TiAl intermetallic", Materials Science and Engineering A, 2018 |
| Kalahroudi, F.J., Koohdar, H., Jafarian, H., (...), Huang, Y., Langdon, T.G., "Effect of high-pressure torsion on the microstructural evolution and mechanical properties of an Fe-10Ni-7Mn (wt. %) lath martensitic steel", AIP Conference Proceedings, 2018 |
| Anijdan, S.H.M., Aghaie-Khafri, M., Jafarian, H.R., Khoshakhlagh, A.R., "Role of cube texture on toughness variation of electric resistance welded steel ", Science and Technology of Welding and Joining, 2017 |
| Koohdar, H., Nili-Ahmadabadi, M., Habibi-Parsa, M., Jafarian, H.R., Bhattacharjee, T., Tsuji, N., "On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Volume 48, Issue 11, 1 November 2017, Pages 5244-5257 |
| Zangeneh Najafi, S., Momeni, A., Jafarian, H.R., Ghadar, S., "Recrystallization, precipitation and flow behavior of D3 tool steel under hot working condition", Materials Characterization, Volume 132, October 2017, Pages 437-447 |
| Jafarian, H.R., Anijdan, S.H.M., Eivani, A.R., Park, N., "A comprehensive study of microstructure development and its corresponding tensile properties in nano/ultrafine-grained metastable austenitic steel during accumulative roll bonding (ARB)", Materials Science and Engineering AVolume 703, 4 August 2017, Pages 196-204 |
| Parnian, P., Parsa, M.H., Mirzadeh, H., Jafarian, H.R., "Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire", Steel Research International, Volume 88, Issue 8, August 2017, Article number 1600423 |
| Eivani, A.R., Hosseini, M., Jafarian, H.R., Mousavi Anijdan, S.H., Park, N., "Microstructural evolution and fatigue properties of severely deformed AA1050 aluminum alloy", Materials Characterization, Volume 130, August 2017, Pages 204-210 |
| Mirab, S., Nili-Ahmadabadi, M., Khajezade, A., Jafarian, H.R., "Correlation between poly-modal grain size and peculiar mechanical properties of pure aluminum deformed by RCSR process", Materials Science and Engineering A, Volume 700, 17 July 2017, Pages 416-424 |
| Jafarian, H.R., Habibi-Livar, J., "Dependency of annealing behaviour on grain size in Al-TiC composite produced by accumulative roll bonding", Bulletin of Materials Science, Volume 40, Issue 3, June 2017, Pages 583-590 |
| Ashrafizadeh, S.M., Eivani, A.R., Jafarian, H.R., Zhou, J., "Improvement of mechanical properties of AA6063 aluminum alloy after equal channel angular pressing by applying a two-stage solution treatment", Materials Science and Engineering A, Volume 687, 27 February 2017, Pages 54-62 |
|
Mousavi Anijdan, S.H., Jafarian, H.R., Bahrami, A., "Microstructural characteristics of nano-structured Fe-28.5Ni steel by means of severe plastic deformation", IOP Conference Series: Materials Science and Engineering, Volume 194, Issue 1, 8 May 2017, Article number 012051
|
| Zoeram, A.S., Anijdan, S.H.M., Jafarian, H.R., Bhattacharjee, T., "Welding parameters analysis and microstructural evolution of dissimilar joints in Al/Bronze processed by friction stir welding and their effect on engineering tensile behavior", Materials Science and Engineering A, Volume 687, 27 February 2017, Pages 288-297 |
| Jafarian, H.R., Tarazkouhi, M.F., "Significant enhancement of tensile properties through combination of severe plastic deformation and reverse transformation in an ultrafine/nano grain lath martensitic steel", Materials Science and Engineering A, Volume 686, 16 February 2017, Pages 113-120 |
Tirekar, S., Jafarian, H.R. , Eivani, A.R., "Towards engineering of mechanical properties through stabilization of austenite in ultrafine grained martensite–austenite dual phase steel processed by accumulative roll bonding", Materials Science and Engineering A, Volume 684, 27 January 2017, Pages 120-126 |
| Farhad Rahimi, Ali Reza Eivani, Hamid Reza Jafarian, Tilak Bhattacharjee, "Effect of pure shear strain on mechanical properties and microstructural evolution", Materials Science and Engineering: A , 679, 133-142, 2017/1/2 |
| M Naeimi, AR Eivani, HR Jafarian, SMA Boutorabi, H Shams, "Correlation between microstructure, tensile properties and fatigue life of AA1050 aluminum alloy processed by pure shear extrusion", Materials Science and Engineering: A, 679, 292-298, 2017/1/2 |
| Aida Alaei, Hamidreza Jafarian, Ali Reza Eivani, "Observation austenite memory and significant enhancement of tensile properties during cyclic reverse martensite transformation in a Fe-Ni-C TRIP steel", Materials Science and Engineering: A,676, 342-350, 2016/10/31 |
| Mohsen Torabi, Ali Reza Eivani, Hamidreza Jafarian, Mohammad Taghi Salehi, "Die Design Modification to Improve Workability during Equal Channel Angular Pressing, Advanced Engineering Materials, 18, 1469-1477, 2016/8/1 |
| Saman Karami, Hamidreza Jafarian, Ali Reza Eivani, Shahram Kheirandish, "Engineering tensile properties by controlling welding parameters and microstructure in a mild steel processed by friction stir welding", Materials Science and Engineering: A, 670, 68-74, 2016/7/18 |
| M Samaee, S Najafi, AR Eivani, HR Jafarian, J Zhou, "Simultaneous improvements of the strength and ductility of fine-grained AA6063 alloy with increasing number of ECAP passes", Materials Science and Engineering: A, 669, 350-357, 2016/7/4 |
| F Javadzadeh Kalahroudi, AR Eivani, HR Jafarian, A Amouri, Reza Gholizadeh, "Inhomogeneity in strain, microstructure and mechanical properties of AA1050 alloy during twist extrusion", Materials Science and Engineering: A, 667, 349-357, 2016/6/14 |
| SM Abbasi, A Momeni, YC Lin, HR Jafarian, "Dynamic softening mechanism in Ti-13V-11Cr-3Al beta Ti alloy during hot compressive deformation", Materials Science and Engineering: A , 665, 154-160, 2016/5/17 |
| HR Koohdar, M Nili-Ahmadabadi, M Habibi-Parsa, HR Jafarian, H Ghasemi-Nanesa, H Shirazi, "Observation of pseudoelasticity in a cold rolled Fe–Ni–Mn martensitic steel", Materials Science and Engineering: A, 658, 86-90, 2016/3/21 |
| MS Shadabroo, AR Eivani, HR Jafarian, SF Razavi, J Zhou, "Optimization of interpass annealing for a minimum recrystallized grain size and further grain refinement towards nanostructured AA6063 during equal channel angular pressing, Materials Characterization, 112, 160-168, 2016/2/29 |
| Hamidreza Jafarian, "Characteristics of nano/ultrafine-grained austenitic TRIP steel fabricated by accumulative roll bonding and subsequent annealing", Materials Characterization, 114, 88-96, 2016/2/24 |
| Sh Vakili Noor, AR Eivani, HR Jafarian, M Mirzaei, "Inhomogeneity in microstructure and mechanical properties during twist extrusion", Materials Science and Engineering: A, 652, 186-191, 2016/1/15 |
| Sh Valipour, AR Eivani, HR Jafarian, SH Seyedein, MR Aboutalebi, "Effect of pre-deformation thermomechanical processing on the development of ultrafine grain structure during equal channel angular extrusion", Materials & Design, 89, 377-384, 2016/1/5 |
| A Seza, H Jafarian, M Hasheminiasari, M Aliofkhazraei, "Effect of Duty Cycle on Corrosion Resistance and Mechanical Properties of Tertiary Al 2 O 3/Y 2 O 3/Graphene Pulsed Electrodeposited Ni-based Nano-composite", Procedia Materials Science, 11, 576-582, 2015/12/31 |
| A Salehi, H Amini Mashhadi, MS Abravi, HR Jafarian, "An Ultrasound-assisted Method on the Formation of Nanocrystalline Fluorohydroxyapatite Coatings on Titanium Scaffold by Dip Coating Process", Procedia Materials Science, 11, 137-141,2015/12/31 |
| M Montazeri-Pour, MH Parsa, HR Jafarian, S Taieban, "Microstructural and mechanical properties of AA1100 aluminum processed by multi-axial incremental forging and shearing", Materials Science and Engineering: A, 639, 705-716, 2015/7/15 |
| Ehsan Saebnoori, Taghi Shahrabi, Hamidreza Jafarian, Mohammad Ghaffari, "Changes in the resistance to corrosion of thermally passivated titanium aluminide during exposure to sodium chloride solution", Research on Chemical Intermediates,41, 1079-1095, 2015/2/1 |
| HR Koohdar, M Nili-Ahmadabadi, M Habibi-Parsa, HR Jafarian, "Development of pseudoelasticity in Fe–10Ni–7Mn (wt%) high strength martensitic steel by intercritical heat treatment and subsequent ageing", Materials Science and Engineering: A, 621,52-60, 2015/1/5 |
| Hamidreza Jafarian, Alireza Eivani, "Texture development and microstructure evolution in metastable austenitic steel processed by accumulative roll bonding and subsequent annealing", Journal of Materials Science, 49, 6570-6578, 2014/10/1 |
| Ehsan Borhani, Hamidreza Jafarian, "Effect of Pre-existing Nano Sized Precipitates on Microstructure and Mechanical Property of Al-0.2 wt% Sc Highly Deformed by ARB Process", Journal of Ultrafine Grained and Nanostructured Materials,47, 1-7, 2014/6/1 |
| HR Jafarian, E Borhani, "EFFECT OF AUSTENITE GRAIN MORPHOLOGY ON VARIANT SELECTION OF MARTENSITE TRANSFORMED FROM ULTRAFINE-GRAINED AUSTENITE", Iranian Journal of Materials Science & Engineering, 10, 21-28, 2013/6 |
| H . R. Jafarian, E. Borhani, A. Shibata and N. Tsuji , ″ Variant selection of martensite transformation from ultrafine grained austenite in Fe-Ni-C alloy ″, Journal of Alloys and Compounds, accepted, 2012. [Doi: 10.1016/j.jallcom.2012.04.057] |
| E. Borhani, H.R. Jafarian, D. Terada, H. Adachi and N. Tsuji, " Microstructural evolution during ARB process of Al-0.2wt.%Sc alloy containing Al3Sc precipitates in starting structures ", Materials Transactions,Vol. 53, No. 1 (2012) pp. 72 - 80 . [doi:10.2320/matertrans.MD201125] |
| A. Shibata, H. R. Jafarian and N. Tsuji, " Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe-24Ni-0.3C ", Materials Transactions, Vol. 53, No. 1 (2012) pp. 81 - 86 . [doi:10.2320/matertrans.MD201125] |
| ) H. R. Jafarian, E. Borhani , A. Shibata, D. Terada and N. Tsuji , ″ Martensite/austenite interfaces in ultrafine grained Fe–Ni–C alloy ″, Journal of Materials Science , 2011, Vol. 46, No. 12, pp. 4216-4220. doi: 10.1007/s10853-010-5018-y. |
| H. Jafarian, E. Borhani, A. Shibata, D. Terada and N. Tsuji , ″ Martensitic transformation from ultrafine grained austenite fabricated by ARB in Fe-24Ni-0.3C ", Materials Science Forum , 2011, Vol. 667-669, pp. 361-366. doi:10.4028/www.scientific.net/MSF.667-669.361 |
| 6) A. Shibata, H. R. Jafarian, D. Terada, and N. Tsuji, ″ Crystallographic Features of Martensite Transformed from Ultrafine Grained Austenite Fabricated by Severe Plastic Deformation ″, Materials Science Forum , 2012, Vol. 706-709, pp. 1835 -1840. doi:10.4028/www.scientific.net/MSF. 706-709.1835.667-669.36 1. |
| E. Borhani, H. Jafarian, H. Adachi, D. Terada and N. Tsuji, " Annealing behaviour of Solution Treated and Aged Al-0.2wt% Sc Deformed by ARB ", Materials Science Forum, 2011, Vol. 667-669, pp. 211-216. doi:10.4028/www.scientific.net/MSF.667-669.211 |
| H.R. Jafarian , E. Saebnoori, A.R. Sabour-Rouhaghdam, T. Shahrabia, M. Nili-Ahmadabadi, ″ Electrochemical Corrosion of Oxidized Gamma Titanium Aluminide in Ringer's Solution ″ , Iranian Journal of Pharmaceutical Sciences, Winter 2009: 5(1): 45-48. |
| H.R. Jafarian , S. Mirzamohammadi, A.R. Sabour Rouhaghdam, M. Aliofkhazraei, ″ Investigation of the microstructure and oxidation behavior of Cr-modified aluminide coatings on γ-TiAl ″, Materials Science, Vol. 47, No. 4, January, 2012, pp. 470-475. DOI: 10.1007/s11003-012-9418-9 |
|
M. Aliofkhazraei , Alireza Sabour Rouhaghdam , A. Denshmaslak , H. R. Jafarian and M. Sabouri , ″ Study of bipolar pulsed nanocrystalline plasma electrolytic carbonitriding on nanostructure of compound layer for CP-Ti ″ , Journal of Coatings Technology and Research, 2008, Volume 5, Number 4 , Pages 497-503 .
|
| H. Ghasemiarmaki, H.R. Jafarian, S. Heshmati-manesh and M. Nili Ahmadabadi, ″ Phase transformations and resulting microstructures in Ti-47Al-2Cr alloy ″, Journal of Faculty of Engineering, University of Tehran, 2008, Vol. 41, No. 8, pp. 1073-1080. (In Persian) |
| S. Heshmati-manesh, M. Nili Ahmadabadi, H. Ghasemiarmaki and H.R. Jafarian, ″ Effect of initial microstructure and further thermomechanical processing on microstructural evolution in a Ti-47Al-2Cr alloy ″, Journal of Alloys and Compounds , 2007, Vol.436, pp. 200-203. |
| H. Ghasemiarmaki, H.R. Jafarian, S. Heshmati-manesh, M. Nili Ahmadabadi, ″ Review of phase transformation in TiAl intermetallic alloys ″, Journal of Iranian Metallurgical Engineering Society, 2007, Vol. 9, No. 25, pp. 50-59. (In Persian) |
(1).jpg)
iust.ac.ir
