|
Educational Records
|
Degree
|
Major
|
Year of Graduation
|
University
|
Location
|
|
B.Sc.
|
Metallurgy Engineering
|
1981
|
Iran University of Science and Technology
|
Iran
|
|
M.Sc.
|
Materials Engineering
|
1987
|
Tarbiat Modarres University
|
Iran
|
|
Ph.D
|
Metallurgical Engineering
|
1995
|
McGill University
|
Canada
|
Teaching Experiences:
- Transport Phenomena in Materials Processing
- Solidification Processing
- Mathematical and Physical Modeling of Materials Processing
- Metallurgical Thermodynamics and Kinetics
- Non-ferrous Alloys Processing
- Principles of Extractive Metallurgy
- Metallurgical Calculations
|
Publications
|
| Tavakkoli, H. , Aboutalebi, M.R. , Seyedein, S.H. , Ashrafizadeh, S.N., "The impact of acidic media on the synergistic solvent extraction of Sm and Lu by mixture of organophosphorus extractants", Journal of Solution Chemistrythis link is disabled, 2022, 51(12), pp. 1571–1588 |
| Rajabi, M. , Aboutalebi, M.R. , Seyedein, S.H. , Ataie, S.A., " Simulation of residual stress in thick thermal barrier coating (TTBC) during thermal shock: A response surface-finite element modeling", Ceramics International, 48(4), pp. 5299–5311, 2022 |
| Riazi, A.H. , Ali Boutorabi, S.M. , Aboutalebi, M. , Shabani, M.O., " Design of gating system for propeller casting through melt flow simulation", International Journal of Computational Materials Science and Surface Engineeringthis link is disabled, 2022, 11(1), pp. 47–71 |
| Rajabi, M. , Vafaeenezhad, H. , Aboutalebi, M.R. , Seyedein, S.H., " Thick thermal barrier coatings with different segmentation crack densities: Microstructure analysis and thermal oxidation behavior", Ceramics Internationalthis link is disabled, 2022 |
| Ahmadi-Binahri, A. , Adeli, M. , Aboutalebi, M.R. , Krasikov, S., " Implementation of Thermite Reactions in the Production of Advanced Intermetallic-Matrix Composites: The Case of Nb2O5/Al Thermite Mixture", Metals and Materials International, 2021 |
| Tavakkoli, H. , Aboutalebi, M.R. , Seyedein, S.H. , Ashrafizadeh, S.N., " Optimization of solvent extraction parameters for separation of samarium and lutetium from acidic media using response surface methodology (Rsm)", Iranian Journal of Materials Science and Engineering Volume 18, Issue 1, Pages 48 - 60 2021 |
| Hassanamraji, N. , Eivani, A.R. , Aboutalebi, M.R., " Finite element simulation of deformation and heat transfer during friction stir processing of as-cast AZ91 magnesium alloy", Journal of Materials Research and Technology, 2021, 14, pp. 2998–3017. |
| Tavakkoli, H. , Aboutalebi, M.R. , Seyedein, S.H. , Ashrafizadeh, S.N., " Implication of thermodynamic functions and speciation diagrams in the analysis of solvent extraction behavior of samarium from acidic solutions", Iranian Journal of Materials Science and Engineering Volume 18, Issue 3 September 2021. |
| Vafaeenezhad, H. , Seyedein, S.H. , Aboutalebi, M.R. , Eivani, A.R., " Numerical Prediction of Ductile Fracture in Sn-5Sb Alloy Hot Deformation Based on Phenomenological Models and Finite Element Analysis", Journal of Materials Engineering and Performance, 2021, 30(8), pp. 5524–5540. |
| Tavakkoli, H. , Aboutalebi, M.R. , Seyedein, S.H. , Asharafizadeh, S.N., " Solvent Extraction of Lutetium from Different Acidic Solutions Using Organophosphorus Extractants", Mining, Metallurgy and Exploration Volume 38, Issue 3, Pages 1561 - 1571 June 2021 |
| Izadpanah, S.M. , Aboutalebi, M.R. , Adeli, M., " Molten salt electrodeposition of aluminum on mild steel: Effect of process parameters on surface morphology and corrosion properties", Materials Research Express, 2021, 8(4), 046518. |
| Vafaeenezhad, H. , Seyedein, S.H. , Aboutalebi, M.R. , Eivani, A.R. , Nikan, O., " Numerical and experimental analysis of creep deformation and stress-relaxation in Sn-5Sb lead-free alloy", Engineering Failure Analysis Volume 120 February 2021 Article number 105075. |
| Vafaeenezhad, H. , Yazdi, A. , Seyedein, S.H. , ... Eivani, A.R. , Hosseinabadi, F., " Micromechanical simulation of plastic deformation behavior and failure commencement in high silicon bainitic steel after austempering", Materials Science and Engineering A Volume 799 2 January 2021 Article number 140131. |
| AH Ghavimi, MR Aboutalebi, SH Seyedein, "Exit-hole repairing in friction stir welding of AA5456 pipe using consumable pin", Materials and Manufacturing Processes, 1-11, 2020 |
| M Chegini, MR Aboutalebi, SH Seyedein, GR Ebrahimi, M Jahazi, "Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map", Journal of Manufacturing Processes 56, 916-927, 2020 |
| H Vafaeenezhad, SH Seyedein, MR Aboutalebi, AR Eivani, O Nikan, "Numerical and experimental analysis of creep deformation and stress-relaxation in Sn-5Sb lead-free alloy", Engineering Failure Analysis, 105075, 2020 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Using high temperature tensile testing data to analyze hot formability of Sn-5Sb alloy: instability and critical damage criteria", Journal of Materials Research and Technology, 2020 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Hybrid Monte Carlo – Finite element simulation of microstructural evolution during annealing of severely deformed Sn-5Sb alloy", Computational Materials Science, 163, pp. 196-208, 2019 |
| Kalantari, H., Adeli, M., Aboutalebi, M.R., "Investigation of the Effect of Foaming Agent on the Fabrication of NiTi Foams Using the Self-Propagating, High-Temperature Synthesis Process", Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 2019 |
| Salehi, H., Tavakoli, H., Aboutalebi, M.R., Samim, H.R., "Recovery of molybdenum and rhenium in scrub liquors of fumes and dusts from roasting molybdenite concentrates", Hydrometallurgy, 2019 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., Nikan, O., "Creep life prediction for Sn-5Sb lead-free solder alloy: Model and experiment", Microelectronic Engineering, 207, pp. 55-65, 2019 |
| Vahdat Vasei, H., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Photocatalytic properties of solution combustion synthesized ZnO powders using mixture of CTAB and glycine and citric acid fuels", Advanced Powder Technology30(2), pp. 284-291 , 2019 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Quantitative Assessment of Dynamic Recovery Kinetics in Sn-5Sb Lead-Free Solder Alloy During Hot Working", Journal of Electronic Materials47(11), pp. 6868-6877, 2018 |
| Pourgolmohammad, B., Masoudpanah, S.M., Aboutalebi, M.R., "Cation distribution tuning of solution combusted CoFe2O4powders", Iranian Journal of Materials Science and Engineering, Volume 15, Issue 2, June 2018, Pages 67-75 |
| Vasei, H.V., Masoudpanah, S.M., Adeli, M., Aboutalebi, M.R., "Solution combustion synthesis of ZnO powders using CTAB as fuel", Ceramics International, Volume 44, Issue 7, May 2018, Pages 7741-7745 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "An investigation of workability and flow instability of Sn-5Sb lead free solder alloy during hot deformation", Materials Science and Engineering A, Volume 718, 7 March 2018, Pages 87-95 |
| Aboutalebi, M., Bijarchi, M.A., Shafii, M.B., Kazemzadeh Hannani, S., "Numerical investigation on splitting of ferrofluid microdroplets in T-junctions using an asymmetric magnetic field with proposed correlation", Journal of Magnetism and Magnetic Materials, Volume 447, 1 February 2018, Pages 139-149 |
Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R., "Effects of the fuel type and fuel content on the specific surface area and magnetic properties of solution combusted CoFe2O4 nanoparticles", Ceramics International, February 06, 2017 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R. , Eivani, A.R., "Application of constitutive description and integrated ANFIS – ICA analysis to predict hot deformation behavior of Sn-5Sb lead-free solder alloy", Journal of Alloys and Compounds, Volume 697, 15 March 2017, Pages 287-299 |
| Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R., "Synthesis of CoFe2O4 powders with high surface area by solution combustion method: Effect of fuel content and cobalt precursor", Ceramics International, Volume 43, Issue 4, 1 March 2017, Pages 3797-3803 |
| Pourgolmohammad, B., Masoudpanah, S.M. , Aboutalebi, M.R, "Effect of starting solution acidity on the characteristics of CoFe2O4 powders prepared by solution combustion synthesis", Journal of Magnetism and Magnetic Materials, Volume 424, 15 February 2017, Pages 352-358 |
| Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R., "Incorporating the Johnson–Cook Constitutive Model and a Soft Computational Approach for Predicting the High-Temperature Flow Behavior of Sn-5Sb Solder Alloy: A Comparative Study for Processing Map Development", Journal of Electronic Materials, Volume 46, Issue 1, 1 January 2017, Pages 467-477 |
| Khani, S.a, Aboutalebi, M.R.b , Salehi, M.T.a, Samim, H.R.a, Palkowski, H., "Microstructural development during equal channel angular pressing of as-cast AZ91 alloy", Materials Science and Engineering A, Volume 678, 15 December 2016, Pages 44-56 |
| Adeli, M., Seyedein, S.H., Aboutalebi, M.R., Kobashi, M., Kanetake, N., "Implementation of DSC analysis in reaction kinetics during heating of Ti–50 at.%Al powder mixture", Journal of Thermal Analysis and Calorimetry, 2 December 2016, Pages 1-8 |
| Bohlouli, A., Afshar, M.R., Aboutalebi, M.R., Seyedein, S.H., "Optimization of tungsten leaching from low manganese wolframite concentrate using Response Surface Methodology (RSM)", International Journal of Refractory Metals and Hard Materials, Volume 61, 1 December 2016, Pages 107-114 |
| Nayebpashaee, N.a , Seyedein, S.H.a, Aboutalebi, M.R.a, Sarpoolaky, H.b, Hadavi, S.M.M.c , "Finite element simulation of residual stress and failure mechanism in plasma sprayed thermal barrier coatings using actual microstructure as the representative volume", Surface and Coatings Technology, Volume 291, April 15, 2016, Pages 103-114 |
| Vafaeenezhad, H.a , Asadolahpour, S.R.b, Nayebpashaee, N.a, Seyedein, S.H.a, Aboutalebi, M.R.a , "Intelligent use of data to optimize compressive strength of cellulose-derived composites", Applied Soft Computing JournalVolume 40, March 2016, Pages 594-602 |
| Karimzadeh, M.a, Aboutalebi, M.R.a , Salehi, M.T.a, Abbasi, S.M.b, Morakabati, M.b , "Adjustment of Aging Temperature for Reaching Superelasticity in Highly Ni-Rich Ti-51.5Ni NiTi Shape Memory Alloy",Materials and Manufacturing Processes16 January 2016, Pages 1-8 |
| Valipour, S., Eivani, A.R. , Jafarian, H.R., Seyedein, S.H., Aboutalebi, M.R. , "Effect of pre-deformation thermomechanical processing on the development of ultrafine grain structure during equal channel angular extrusion", Materials and Design, Volume 89, January 05, 2016, Pages 377-384 |
|
M. Karimzadeh, M. R. Aboutalebi, M.T. Salehi, S.M. Abbasi, M. Morakabati, "Effects of thermomechanical treatments on the martensitic transformation and critical stress of Ti–50.2 at.% Ni alloy", Journal of Alloys and Compounds, 2015, 637 (2015) 171–177
|
| Mojtahedi, M.a , Goodarzi, M.a, Aboutalebi, M.R.a, Soleimanian, V.b , "An investigation on the microstructure and defects in the mechanically milled Cu and Fe powders", Powder Diffraction, Volume 30, Issue 1, 21 October 2015, Pages 14-24 |
| Aboutalebi, M.R.a, Karimzadeh, M.a , Salehi, M.T.a, Abbasi, S.M.b, Morakabati, M.b , "Influences of aging and thermomechanical treatments on the martensitic transformation and superelasticity of highly Ni-rich Ti-51.5 at.% Ni shape memory alloy", Thermochimica Acta, Volume 616, 20 September 2015, Article number 77303, Pages 14-19 |
| Mohsenifar, A., Aboutalebi, M.R. , Seyedein, S.H., "Effect of high temperature oxidation on the corrosion behavior of aluminized low carbon steel in molten aluminum", Iranian Journal of Materials Science and EngineeringVolume 12, Issue 3, 1 September 2015, Pages 88-94 |
| Shaeri, M.H.a , Shaeri, M.b, Salehi, M.T.c, Seyyedein, S.H.c, Abutalebi, M.R.c, "Effect of equal channel angular pressing on aging treatment of Al-7075 alloy", Progress in Natural Science: Materials InternationalVolume 25, Issue 2, 1 April 2015, Pages 159-168 |
| M. Shirinbayan, H. Razavizadeh, M. R. Aboutalebi, "An investigation on the kinetics of lead recovery from smelting furnace slag using hydrochloric acid', Vol. 55, pp. 538-541, 2014 |
| Mohammadali Shirinbayan, Ali Shafyei, M. R. Aboutalebi, "Kinetics of vanadium carbide coating produced on AISI D2 steel by thermoreactive diffusion technique", RUSSIAN JOURNAL OF APPLIED CHEMISTRY, Vol. 87, pp. 1930-1935, 2014 |
| M. Karimzadeh, M. R. Aboutalebi, M.T. Salehi, S.M. Abbasi, M. Morakabati, "A study on the pseudoelasticity of low temperature aged and thermomechanically treated Ti-51.5 at.% Ni shape memory alloy", INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, V. 105, pp. 1173-1178, 2014 |
| Zarebidaki Arman, Mahmoudikohani Hassan, M. R. Aboutalebi, "Microstructure and corrosion behavior of electrodeposited nano-crystalline nickel coating on AZ91 Mg alloy", JOURNAL OF ALLOYS AND COMPOUNDS, 825-830, 2014 |
|
E. Mousavi, M. R. Aboutalebi, S. H. Seyedein, M. Abbasi, "Influence of Carbon on the Ageing Behavior of Ti-13V-11Cr-3Al", iranian journal of materials science and engineering, V. 11, no. 3, 40-47, 2014
|
| H. Karimi Zarchi, M. Soltanieh, M. R. Soltanieh, "Kinetic study on NaF-activated pack-aluminizing of pure titanium at 950–1100 °C", TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, V. 24, 1959-1968, 2014 |
| M. R. Aboutalebi, S. H. Seyedein, "A NUMERICAL MODEL FOR THE COMBUSTION SYNTHESIS OF TITANIUM ALUMINIDE IN THE SELF-PROPAGATING MODE", COMBUSTION SCIENCE AND TECHNOLOGY, no. 1, 2014 |
| H. Naffakh, M. A. Aboutalebi, S. H. Seyedein, M. Goodarzi, C. Mapelli, "Comparative study on dissimilar welding of Inconel 718 and Udimet 500 precipitation strengthened nickel based superalloys" Materials Science and Technology, 339-347, 2014 |
| M. Adeli, S. H. Seyedein, M. R. Aboutalebi, "A numerical model for the combustion synthesis of titanium aluminide in the self-propagating mode",Combust. Sci. Technology, 1118-1131, 2013 |
| M. Mojtahedi, M. R. Aboutalebi, M. Goodarzi, "Investigation on the formation of Cu–Fe nano crystalline super-saturated solid solution developed by mechanical alloying", Journal of Alloys and Compounds, V. 550, 380-388, 2013 |
| H. Naffakh, M. A. Aboutalebi, S. H. Seyedein, C. Mapelli,"Microstructural, mechanical and weldability assessments of the dissimilar welds between γ′- and γ″-strengthened nickel-base superalloys", Materials characterization, V. 82, 41-49, 2013 |
| H. Naffakh, M. A. Aboutalebi, S. H. Seyedein, C. Mapelli, "A solidification model for prediction of castability in the precipitation-strengthened nickel-based superalloys", Journal of Materials Processing Technology, v. 213, 1876-1884, 2013 |
| P. Samadi, M. R. Afshar, M. Aboutalebi, S. H. Seyedein, "An investigation on the effect of electromagnetic force on the characteristics of electrodeposited Ni/Al2O3 composite coatings", Iranian Journal of Materials Science & Engineering, vol. 9, no.1, 2012 |
| M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. Karimi Taheri, S. M. Abbasi, "High temperature deformation and processing map of a NiTi intermaetallic alloy", Intermetallics, 2011 |
| M. Morakabati, Sh. Kheirandish, M. Aboutalebi, A. Karimi Taheri, S. M. Abbasi, "A study on the hot workability of wrought NiTi shape memory alloy", Materials science and engineering A528, 2011, 5656-5663 |
| H. Barati, M. Aboutalebi, S. G. Shabestari, S. H. Seyedein, "Investigation on dendritic solidification and microsegregation in presence of melt convection using phase field simulation", |
| A. H. Meysami, R. Ghasemzadeh, S. H. Seyedein, M. Aboutalebi, "Effect of external forced flow and boiling film on heat transfer of AISI 4140 steel horizontal rod during direct quenching", Journal of Iron and Steel Research, 2011, 18(10), 34-41 |
| A. Jafari, S. H. Seyedein, M. Aboutalebi, "Semi-implicit method for thermodynamically linked equations in phase change problems (SIMTLE)", Applied Mathematical Modeling, 35, 2011, 4774-4789 |
| A. Hajari, S. H. Seyedein, M. Aboutalebi, "Mathematical modeling of transport processes in funnel shaped mold of steel thin slab continuous caster", |
| S. Ghafurian, S. H. Seyedein, M. Aboutalebi, M. Afshar, "Numerical modeling of the combustion synthesis of TiAl/Al2O3 composite via microwave heating", Iranian Journal of Materials Science & Engineering, vol. 8, no.3, 2011 |
|
Karimbeigi A. ,Zakeri A., Aboutalebi M.R., Sharifi P., "Study on Microwave Synthesis and Characterisation of Bulk Nickel Aluminides, Materials Science and Technology", 27(9), pre-print .
|
|
H. Barati, M. R. Aboutalebi, S. G. Shabestari and S. H. Seyedein, "Investigation on dendritic solidification and microsegregation in presence of melt convection using phase field simulation", Canadian Metallurgical Quarterly, Vol. 15, No. 4, pp 408-415, 2011
|
|
A. Meysami, R. Ghasemzadeh, S.H. Seyedein, M.R. Aboutalebi, "Effect of External Forced Flow and Boiling Film on Heat Transfer of AISI 4140 Steel Rod during Direct Quenching", Journal of Iron and Steel Research International, 2011, 18(10).
|
|
A. Jafari, S.H. Seyedein, M.R. Aboutalebi, "Semi-implicit method for thermodynamically linked equations in phase change problems (SIMTLE), Applied Mathematical Modelling", in press, doi:10.1016/j.apm.2011.03.051
|
|
M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. KarimiTaheri, S.M. Abbasi, "High temperature deformation and processing map of a NiTi intermetallic alloy", Intermetallics 19 (2011) 1399-1404
|
|
Hajari, S.H. Seyedein, M.R. Aboutalebi, "Mathematical Modeling of Transport Processes in Funnel Shaped Mold of Steel Thin Slab Continuous Caster", Journal of Heat Transfer, JUNE 2011, Vol. 133, pp. 1-5
|
|
M. Morakabati, M. Aboutalebi, Sh. Kheirandish, A. KarimiTaheri, S.M. Abbasi, "Hot tensile properties and microstructural evolution of as cast NiTi and NiTiCu shape memory alloys", Materials and Design 32 (2011) 406–413
|
|
M. Morakabati, S. Kheirandish, M.R. Aboutalebi, A. Karimi Taherei, M. Abbasi, "The effect of Cu addition on the hot deformation behavior of NiTi shape memory alloys", Journal of Alloys and Compounds, 499 (2010) 57-62
|
|
A.H. Meysami, R. Ghasemzadeh, S.H. Seyedein, M.R. Aboutalebi, "An investigation on the microstructure and mechanical properties of direct-quenched and tempered AISI 4140 steel", Materials and Design 31 (2010) 1570–1575
|
|
M. Adeli, S.H. Seyedein, M.R. Aboutalebi, M. Kobashi, N. Kanetake, "A study on the combustion synthesis of titanium aluminide in the self-propagating mode", Journal of Alloys and Compounds, 497 (2010) 100-104
|
|
A. Jafari, S. H. Seyedein, M. R. Aboutalebi, D. G. Eskin and L. Katgerman, "Numerical ModelingofMacrosegregationduringthe Direct-chill Castingof an Al Alloy Billet", Iranian Journal of Materials Science & Engineering Vol. 7, Number 3, Summer 2010
|
|
M. MohabbiMoghaddam, S.H. Seyedein, M.R.Aboutalebi, "Fluid Flow and Heat Transfer Modeling of AC Arc in Ferrosilicon Submerged Arc Furnace", Journal of Iron and Steel Research, International, 2010, 17(9): 14-18
|
|
M. Adeli, M. Shekari, S. H. Seyedein and M. R. Aboutalebi, "Numerical simulation of Combustion Synthesis of Aluminide Intermetallic compounds", Iranian Journal of Materials Science & Engineering Vol. 7, Number 2, Spring 2010.
|
| A.H. Meysami, R. Ghasemzadeh, S.H. Seyedein, M.R. Aboutalebi, R. Ebrahimi, M. Javidani, "Physical simulation of hot deformation, and microstructural evolution for 42CrMo4 steel prior to direct quenching", Journal of Iron and Steel Research, International, 16 (2009) 47-51. |
|
M. RezaAfshar, M.R. Aboutalebi , R.I.L. Guthrie , M. Isac, " Modeling of electromagnetic separation of inclusions from molten metals", International Journal of Mechanical Sciences, 52 (2010) 1107-1114.
|
|
M. Asadian, H. Seyedein, M.R. Aboutalebi, A. Maroosi , “Optimization of the parameters affecting the shape and position of crystal-melt interface in YAG single crystal growth”, Journal of Crystal Growth, 311 (2009) 342-348.
|
|
S.H.R. Fatemi Nayeri, J. Vahdati Khaki, M.R. Aboutalebi, “Implementation of combined mechanical activation and thermal analysis for identification of combustion synthesis mechanism in TiO2-Al-C system”, Iranian Journal of Materials Science and Engineering, Vol. 6, No. 1, Winter 2009, pp. 7-14
|
|
B. Mirzakhani, H. Arabi, M.T. Salehi, Sh. Khoddam, J. Sietsma, S.H. Seyedein, M.R. Aboutalebi, “Prediction of static softening of a microalloyed steel by the integration of finite element model with physically based state variable model”, Iranian Journal of Materials Science and Engineering, Vol. 6, No. 4, Autumn 2009, pp. 17-25
|
| M. Farhani, M. Soltanieh, M.R. Aboutalebi, "Mechanism of dissolution of flux containing Mn-Al compacts in molten aluminium", International Journal of Cast Metals Research, 22 (2009) 353-356. |
|
B. Mirzakhani, M.T. Salehi, S. Khoddam, S.H. Seyedein, M.R. Aboutalebi, "Investigation of Dynamic and Static recrystallization behavior during thermomechanical processing in a API-X70 microalloyed steel", Journal of Materials Engineering and Performance,18 (2009) 1035. DOI: 10.1007/s11665-009-9387-9
|
|
B. Mirzakhani, H. Arabi, M.T. Salehi, S.H. Seyedein, M.R. Aboutalebi, Sh. Khoddam, A.Mohammadi, “Computer aided optimization of specimen geometry of hot torsion test to minimize microstructure non homogeneity and temperature gradient before deformation”, Iranian Journal of Materials Science and Engineering, Vol.6, No. 3, Summer 2009 , pp. 35-43
|
|
B. Mirzakhani, M.T Salehi, H. Arabi, S. Khoddam, S.H. Seyedein, M.R. Aboutalebi, "Prediction of temperature distribution in the hot torsion test specimen", IUST International Journal of Engineering Science, Vol. 19, No. 5 & 1, 2008, pp. 45-50
|
| A.R. Kamali, M.R. Aboutalebi, M.R. Farhang, "A low- temperature combustion synthesis process for production of Ti from TiO2", Int. j. of self-propagating high-temperature synthesis, Vol. 17, No.4, 2008, pp. 233-236 |
| S. Kianfar, S.H. Seyedein, M.R. Aboutalebi, "Heat transfer and solidification analysis in the mould region of a horizontal copper alloy billet continuous caster", Int. J. of Cast Metals Research, 2008 |
|
S. Kianfar, S.H. Seyedein, M.R. Aboutalebi, “Solidification modeling and dendrite structure analysis in a horizontal continuously cast brass billet”, Iranian Journal of Materials Science and Engineering, Vol. 5, No. 4, Autumn 2008, pp. 16-24
|
|
S. Ahmadi, A. Shokuhfar, M.R. Aboutalebi,A. Rezaei, “A Calorimetric Study on the Precipitation of T1 Phase during the Ageing of an Al-Li-Cu-Zr Alloy”, Defect and Diffusion Forum, 2008
|
|
S.H.R . Fatemi, J. Vahdati Khaki, M.R. Aboutalebi, “An Investigation on the Mechanism of TiC+Al2O3 Formation in the Combustion Synthesis of the Mechanically Activated TiO2-Al-C System”, Defect and Diffusion Forum, 2008
|
|
S. Rastegari, H.Aarabi, M.R. Aboutalebi, A. Eslami, “A Study on the Microstructureal Changes of Cr-Modified Aluminide Coatings on a Nickel-based Superalloy During Hot Corrosion”, Canadian Metallurgical Quarterly, 2008
|
|
S.H.R . Fatemi, J. Vahdati Khaki, M.R. Aboutalebi, “An Investigation on the Mechanism of TiC/Al2O3 Combustion Synthesis via Mechanical Activation of Double Phases in TiO2-Al-C System”, Defect and Diffusion Forum, 2008
|
| M. Farhani, M. Soltanieh, M.R. Aboutalebi, "Effect of a chloride flux on the dissolution of Mn-Al compacts in molten aluminum", Iranian Journal of Materials Science & Engineering, Vol. 5, No.3, 2008 |
|
R. Molaei, M. R. Aboutalebi, M. Soltanieh, "Alloying kinetics of mechanically activated Mn-Al powder compacts in aluminium melt", Canadian metallurgical quarterly, No.45, 2006
|
|
M.R. Aboutalebi, R. I. L. Guthrie, S. H. Seyedein, "Mathematical modeling of coupled turbulent flow and solidification in a single belt caster with electromagnetic brake", Applied mathematical modeling, 2006
|
|
M.R. Afshar, M.R. Aboutalebi, M. Isac, R.I.L. Guthrie, "Mathematical modeling of electromagnetic separation of inclusions from magnesium melt in a rectangular channel", Materials Letter, 2006
|
|
O. Majidi, S. G. Shabestari, M. R. Aboutalebi, "Study of fluxing temperature in molten aluminium refining process", Journal of Materials Processing Technology, 2006
|
|
S.H. Seyedein, M.R. Aboutalebi, A. Jafari, "Numerical simulation of coupled fluid flow and solidification in a single roll caster", Canadian metallurgical quarterly, No.45, 2006, pp. 329-340
|
|
Fatemi, M. R. Aboutalebi, J. Vahdati Khaki, "The effect of millig conditions on the mechanical alloying and combustion synthesis of TiO2-Al-C powder mixture", Iranian Journal of materials sci. & eng., No. 1, 2006
|
|
M.R. Aboutalebi, M. Isac ,R.I.L. Guthrie,“The Behaviour of Selenium Impurities During the Addition of Se-Containing Manganese to Steel Melt”, Steel Research International, 2004
|
|
Sh. Raygan, J. Vahdati Khaki, M. R. Aboutalebi, "The behaviour of hematite and graphite blend during ball milling and heating up reduction of milled mixture", Steel Research, No. 3, 2003, pp. 163-168
|
|
S. Raygan, J. Vahdati Khaki, M.R. Aboutalebi, “Effect of Mechanical Activation on the Packed-Bed, High-Temperature Behavior of Hematite and Graphite Mixture in Air”, Journal of Materials Synthesis and Processing, 2002
|
|
M.R. Aboutalebi, S. Rastegari, H. Arabi , “Microstructure and Formation Mechanism of a Cr-Modified Platinum Aluminide Coating on IN-738 LC”, International Journal of Engineering Science, 2002
|
|
J. Vahdati Khaki, M.R. Aboutalebi, S. Raygan, “The effect of mechanical milling of the carbothermic reduction of hematite”, International Journal of Engineering Science, 2002
|
|
M.R. Aboutalebi, H. Arabi, M. Zarghami, “An Investigation on the Effect of Chromizing Parameters on Hot Corrosion Behavior of IN-738LC at 850 C”, International Journal of Engineering Science, Vol. 13 ,No. 2, 2002
|
| Nayebpashaee, N., Aboutalebi, M., Vafaeenezhad, H., Hadavi, S.M., Seyedein, S.H., Sarpoolaky, H., "Micromechanical modeling of crack propagation in TBC systems, 6th Conference on Thermal Power Plants, CTPP 2016, 1 June 2016, Article number 7483056, Pages 69-756th Conference on Thermal Power Plants, CTPP 2016; Tehran; Iran; 19 January 2016 through 20 January 2016; Category numberCFP1618U-ART; Code 121971 |
| N. Naieb Pashaie, H. Vafaienejad, M. R. Aboutalebi, S. H. Seyedein, H. Sarpoolaky, "Finite element simulation of stress distribition through novel duplex thermal barrier coating used in turbofan internal combustion engine", The 23rd Annual International Conference on Mechanical Engineering (ISME2015), Tehran, Iran |
| M. H. Shaeri, M. Shaeri, M. T. Salehi, S. H. Seyedein, M. R. Aboutalebi, "Texture evolution of ultrafine grained Al-7075 alloy produced by ECAP",3rd International Engineering Materials and Metallurgy Conference, Tehran, Iran, 2014 |
| A. Zare Beigi, H. Mahmoodi, M. R. Aboutalebi, "Effect of Nickel electroplating coating on the Corrosion resistance of AZ91 magnesium alloy", 3rd International Engineering Materials and Metallurgy Conference, Tehran, Iran, 2014 |
| M. Adeli, M. Mahvi, K. Rezaie, M. R. Aboutalebi, S. H. Seyedein, "The Combustion synthesis of Ni-Ti Intermetallic Compounds",Advances in Materials and Processing Technologies (AMPT 2014), Emirate |
| M. R. Aboutalebi, S. H. Seyedein, "Simulation of heat transfer with phase transformation in dissimilar laser beam welding of Aluminum and Magnesium sheets in limited conduction mode", Iran International Aluminum Conference (IIAC2014), Tehran |
| H. Vafaienejad, M. R. Afsharmoghaddam, S. H. Seyedein, M. R. Aboutalebi, "Finite Element Simulation of Aluminium Flange Fabrication Using Explosive Forming",Iran International Aluminum Conference (IIAC2014), Tehran |
| A. Mohsenifar, M. R. Aboutalebi, S. H. Seyedein, "Effect of high temperature oxidation on the corrosion behavior of aluminized low carbon steel in molten aluminum",Iran International Aluminum Conference (IIAC2014), Tehran |
| M. R. Aboutalebi, "High Temperature oxidation effect on the dissolution rate of hot-dip aluminized steel in aluminum melt", ICOSEM-2013 |
|
N. Montakhab, A Rashidi, S.SadeghHasani, M. R. Aboutalebi, H.Arabi, "Synthesis and Characterization of SiCarbon Nanotube Hybrides using a Sol-Gel Method", UFGNSM 2011
|
| S. Mousavi Nasab, M. Aboutalebi, S. H. Seyedein, J. Vahdati Khaki, "Fabrication of single phase NiTi by combustion synthesis of mechanically activated powders", Advances in Materials Processing and Technology(AMPT) |
| M. Aboutalebi, H. Arabi, "Synthesis and Charactrization of SIO2- Carbon Nanotube Hybrides Using a Sol-Gel Method", 3rd International Conference onUltrafine Grained and Nanostructured Materials, 2011 |
|
N. Montakhab, A Rashidi, S.SadeghHasani, M.R. Aboutalebi, H.Arabi, "Synthesis and Characterization of SiCarbon Nanotube Hybrides using a Sol-Gel Method", UFGNSM 2011
|
| S. MousaviNasab, M.R. Aboutalebi, S.H. Seyedein, J.Vahdati Khaki, "Fabrication of Single Phase NiTi by Combustion Synthesis of Mechanically Activated powders", AMPT 2011 |
|
A . Arefi-A. Zakeri-M. R. Aboutalebi, Parametric study on electro deposition of Zn-Ni-Al2O3 nanocomposite coatings, The 9th Iranian Biennial Electrochemistry, 2010
|
|
N. Sharifi, S.H. Seyedein, M.R. Aboutalebi, " Mathematical modeling of turbulent fluid flow and mass transfer in a steel continuous casting tundish", AMPT 2009
|
|
M. Shekari, S.H. Seyedein, M.R. Aboutalebi, M. Adeli, "Numerical simulation of combustion synthesis of Ni-Al intermetallic compounds: process parameters study", AMPT 2009
|
| M.R. Afshar, M.R. Aboutalebi, M. Isac، " Modeling of electromagnetic filtration of molten metals"، AMPT, 2008 |
| A.H. Meysami, R. Ghademzadeh, S.H. Seyedein, M.R. Aboutalebi, A. Memari، "The effect of direct quenching and tempering process on mechanical properties and microstructure of AISI 4140 steels as compared with conventional re-austenited, quenched and tempered heat treatment"، 3rd Int. Conf. on Thermomechanical Processing of Steels, 2008 |
|
M.R. Afshar, M.R. Aboutalebi, "Einvironmental Issues associated with the addition of selenium-contaminated manganese additions to molten steel", ICS proceeding, 2005
|
|
M. R. Afshar, M. R. Aboutalebi, "Electromagnetic filtraction of steel melts”, ICS proceeding, 2005
|
|
H. Seyedein, M.R. Aboutalebi,A. Jafari, "Numerical simulation of coupled fluid flow and solidification in a single-roll caster", 43th annual Conf. of Metallurgists of COM, Canada, 2004
|
|
M.R. Afshar, M.R. Aboutalebi, R.I.L. Guthrie, M.Isac, "Modeling of electromagneic separation of non-metalic inclusions from magnesium melts", 43th annual Conf. of Metallurgists of COM, Canada, 2004
|
|
M.R. Aboutalebi, M. Isac, R.I.L. Guthrie, “The behaviour of selenium inpurites during the alloying of Aluminium with manganese additions”, Light Metals, 2003
|
Written Works
|
Book's Name
|
Author's Name
|
Date
|
|
Light alloys,Metallurgy of light metalls
|
Aboutalebi
|
3th ed. 2000
|
|
Fundamental filtration of metalls
|
Aboutalebi
|
1998
|
|
/aboutalebi.jpg)
iust.ac.ir
