School of Automotive Engineering
people
Dr. Marzban

Dr. Javad Marzbanrad

 | Post date: 2017/03/11 | 

Dr. Javad Marzbanrad ,Professor

Automotive Structure and Body

Research laboratory

Class schedule

 		  Email: marzban(At)iust.ac.ir
 Phone: (+9821) 77240540 Ext.: 3981
 Fax: ---
 Phone: (+9821) 73223981
 Postal code: 1684613114  
 Address: Iran University of Science & Technology, University St., Hengam St., Resalat Square, Tehran, Iran.
 		   Virtual lab
  Research laboratory
  Scoups
  Scholar
  Researchgate

     Education  | Honors and Awards | Courses  | Research Interests | Executive Responsibilites | Patents | Projects | Memberships | Thesis | Books | Journals | Conferences
 



 Ph.D., Mechanical Engineering, Tarbiat Modarres University, Tehran, Iran, 2001.
  • Thesis Title: Optimal Preview Control Design of an Active Vehicle Suspension System Based on a Full-Car Model.
 M.S., Mechanical Engineering, Sharif University of Technology, Tehran, Iran, 1994.
  • Thesis Title: Kinematical Analysis of Spatial Linkages Using Five Basic Mechanisms.
 B.S., Mechanical Engineering, University of Tehran, Tehran, Iran, 1989.

 
 



 First Researcher: School of Automotive Eng, IUST, 2009.

 First Researcher: School of Automotive Eng, IUST, 2008.

 Selective Author: Dibagaran Organization Institute, 2008.


 
 

 

Ph.D.:

  1. Modern Design Methods in Automotive

  2. Product Technology

Graduate:

  1. Modern Design Methods in Vehicle
  2. Fatigue and Fracture Mechanics
  3. Finite Element Methods
  4. Vehicle Crash Mechanics
  5. Numerical Methods
  6. Advance Engineering Mathematics
  7. Advance Vibration
  8. Application of Advance Control in Vehicle
  9. Advance Automotive Technology
  10. Shell and Plate Theory and its Application in the Automotive
  11. Suspension System, Steering and Brake Standards of Automotives

Under Graduate:

  1. Theory of Vibratrion
  2. Machine Tool Design
  3. Mechanical Design II
  4. Mechanical Design I
  5. Measurement Systems
  6. Dynamics of Machinery
  7. Synthesis of Mechanisms
  8. Chassis and Body Vehicle Design
  9. Dynamics
  10. Engineering Design Methods

 
 

   
‎Research Areas:
  • Automotive Structure and Body, Vehicle Crash Mechanics, Chassis and Suspension Systems, Mechanical Design, Vibration and Control, Mechanisms.

 
  

 

 


Executive and Academic Experience:
  1. Head of Automotive Structure and Body Department, Faculty of Automotive, Iran University of Science and Technology, 2020–2022.
  2. Deputy of Education and Research, Faculty of Automotive, Iran University of Science and Technology, 2020–2022.
  3. Member of the Book Council, Iran University of Science and Technology, 2020–2023.
  4. Secretary of the First Technological Event for Natural Gas Vehicles, Tawana Company, 2022.
  5. Secretary of the Second International Conference on the Application of Advanced Materials and Manufacturing in Industries, Iran University of Science and Technology, 2022.
  6. Head of Automotive Structure and Body Department, Faculty of Automotive, Iran University of Science and Technology, 2016–2018.
  7. Secretary of the National Congress on the Application of Advanced Materials and Manufacturing in Industries, Iran University of Science and Technology, 2017.
  8. Member of the Strategic Council and Secretary of the Cultural and Educational Committee of Green Management, Iran University of Science and Technology, 2016–2017.
  9. Member of the Strategic Committee of the University’s Four-Year Program, Iran University of Science and Technology, 2015–2017.
  10. Director of Cultural and Social Communications, Iran University of Science and Technology, 2015–2021.
  11. Member of the National Traffic Think Tank, 2013–2022.
  12. Director of the Office of Continuing Education, Iran University of Science and Technology, 2011–2014.
  13. Member of the Editorial Board of Scientific-Research and Scientific-Promotional Journals, Rahvar, 2009–2019.
Visiting Scholar:
  • Clarkson University , MAE Dept., Potsdam, NY, USA, 2000-01.
 


Patents:
  1. E. Dehghani, J. Marzbanrad, V. Rastegar, “Airbag Pressure Control System During Crash”, Registration No 98343, 2018.
  2. J. Khanalizadeh, J. Marzbanrad, “Suspension System of Ambulance Bed”, Registration No. 84219, Iran, 2014.
  3. M. Pahlavani, A. Amirian, J. Marzbanrad, “Life Optimal Controller of Dual Fuel Engines with Gasoline Based”,  Registration No. 80858,Iran, 2013.
  4. M. Nankali, J. Marzbanrad, “Multi Series-Parallel Hybrid Vehicle with Super Capacitor Power Supply”, Registration No.80594, Iran, 2013.
  5. Z. Tavakoli, J. Marzbanrad, “Pneumatic Apparatus of Road Vibration Simulation”, Registration No. 72887, Iran, 2011.
  6. J. Marzbanrad, M. Alahyari Beig, “Manufacturing of Polishing Equipment for Rectangular Sectional Profiles”, Registration No. 58438, Iran, 2009.
  7. J. Marzbanrad, J. Zarei, "Creating Compressed Air with Using Exhaust Gas", Registration No. 55982, Iran, 2009.
  8. J. Marzbanrad, S.A. Sharbaf, “Torque Exchanger Design Using Intelligent Fluid”, Registration No. 40529, Iran, 2007.
  9. H. Holeki, J. Marzbanrad, “Replacement Sign System for Air Filter of Automobile with Piezo-Electric Sensor”, Registration No. 39757, Iran, 2007.
  10. J. Marzbanrad, S.A. Sharbaf, “Design and Manufacturing of Magnetic Brake with Intelligent Fluid”, Registration No. 38238, Iran, 2007.
  11. J. Marzbanrad, J. Mohammadi, S.Y. Mostatab, “Hydraulic Steering design for Pride GTX Car”, Registration No. 32886, Iran, 2005.
  12. A. Shane Sazanzadeh, J. Marzbanrad, “An Electrical System with Low Consumption Energy Substituted with Heat Systems”, Registration No. 30296, Iran, 2004.

 
 


 ‎Responsibilities, Guidance, Collaboration, and Consultation in Projects and Industrial Productions:
  1. Feasibility study and selection of base gas engine for commercial applications, Tawana Company, 2022.
  2. Hardware and software simulation of an automatic transmission to determine performance and analyze faults, Automatic Transmission Specialized Center (AATC), 2020.
  3. Investigation and research on the combination of PET and P.P. polymer materials (polyester and polypropylene) to determine their combined properties, Sania Avvar Chemical Company, 2019.
  4. Design and manufacturing of Nissan engine mount rubber to improve performance, Part Sazehan Pouya Company, 2019.
  5. Head of Automotive Dynamic Systems Laboratory, Iran University of Science and Technology, 2014–2019.
  6. Design of the national B-class automotive platform, 2013–2015.
  7. Analysis and optimization of a chaotic nonlinear air suspension system of a vehicle based on ride comfort and stability criteria, Islamic Azad University, 2010–2012.
  8. Investigation of aluminum fuel rail for vehicles, Pishahang Industrial Company, 2006–2007.
  9. Translation of automotive technical documents, Pars Khodro After-Sales Services Company, 2005–2006.
  10. Consulting services, Khazar Chain Production Company, 2005.
  11. Development of national rail standards, Institute of Standards and Industrial Research of Iran, 2005.
  12. Determination of courses and training process for fuel consumption optimization in the automotive industry, National Iranian Oil Products Distribution Company (NIOPDC), 2004.
  13. Identification of priorities and mandatory ITS standards in various transportation methods internationally, Vice Presidency of Education, Research and Technology, Transportation Research Institute, 2004–2005.
  14. Collection, review, and classification of testing equipment for automotive electrical and electronic parts, Electro Kaveh Company, 2004.
  15. Development of sales system software, Vazin Software, Grocery Stores, 2004–2005.
  16. Prevention of wear and contamination of equipment, Nourd Bandar Abbas Company, 2004.
  17. Static and dynamic analysis of gas-powered buses, Shahab Khodro Company, 2003–2004.
  18. Standardization Committee for the development of 40 national standards for the Institute of Standards and Industrial Research of Iran, Vehicle Consultants Engineers Company, 2003–2004.
  19. Design and construction of pedestrian gates, research project, Islamic Azad University, Dezful Branch, 2003.
  20. Design and construction of oil pan bolts to prevent oil leakage, research project, Islamic Azad University, Dezful Branch, 2003.
  21. Prioritization of standards in the automotive industry, Iran University of Science and Technology, 2002–2003.
  22. Preparation of technical profiles for automotive parts, exhaust manifold, and pump base production, Jadid Sazeh Company, 1998–2001.
  23. Supervision of the basic and detailed design of the sulfuric acid plant, Sythc Company, 2001.
  24. Chemical-mechanical polishing, Clarkson University, Potsdam, New York, USA, 2001–2002.
  25. Implementation of an international tender and selection of a contractor for the construction of the sulfuric acid plant, Sythc Company, 2000–2001.
  26. Technical consulting and implementation of ISO 9002 quality assurance system in the production of industrial switches, Electro Kaveh Company, 1996–2001.
  27. Design, construction, and production of class 800 gate valves, Ouj System Company, 1998–2001.
  28. Control, inspection, and supervision of automotive parts production in contracted manufacturing companies of SAPCO, Faradanesh Company, 1995–1998.
  29. Computerization of the registration system, Iran University of Medical Sciences, Tehran, 1996–1997.
  30. Determination of time constant of power plant turbines, Niroo Research Center, Tehran, 1992–1994.
  31. Kinematic analysis of space mechanisms using basic mechanisms, research project, Sharif University of Technology, 1994.
  32. Design and production of various industrial crushers, Iran Sang Shekan Company, Tehran, 1994–1997.
  33. Design and production of various air and oil filters for vehicles, Tehran Filter Company, 1992–1994.
  34. Design and production of various vehicle exhaust systems, Pars Exhaust Company, 1992–1994.
 


 Certifications:
  • J. Marzbanrad , Standard Certification, Consultant and National Standard Preparation and Inspection, Institute of Standards and Industrial Research of Iran, 2004.
 PROFESSIONAL DEVELOPMENT COURSES:
  1. “Management Information System”, “Management of Human Resources”, and “Business through Internet”; Industrial & Scientific Services Co., Tehran, Iran, 2002.
  2.  QS 9000, Including: “APQP”, “FMEA”, “PPAP”, “SPC”, “MSA”; Certificates are issued by URS of U.K., Tehran, Iran, 2002.
  3.  “ISO 9000 Internal Auditor Training”, QMI, Tehran, Iran; Certificate is issued by Sussex Center, Ontario, Canada, 1998.
  4.   “Strategic Management”, Institute of Management & Development of Iran, Tehran, Iran, 1994.
  5.  “Die Design”, Jahade Daneshgahi, Sharif University of Technology, Tehran, Iran, 1993.
 CONFERENCES ATTENDANCE AND PRESENTATION:
  1. International Advanced of Technology Congress (ATCi), PWTC, Kuala Lumpur, Malaysia, 2009
  2. 3rd International Conference on Modeling, Simulation and Applied Optimization, Sharjah, U.A.E. 2009.
  3. 6th Industrial Simulation Conference, ISC’2008, Eurosis, Lyon, France, 2008.
  4. International Conference on Engineering and Mathematics, Bilbao, Spain, 2007.
  5. International Conference on Advances in Mechanical Engineering (AME 2006), Baba Banda Singh Bahadur Eng. College, Fatehgarh Sahib, Punjab, India, 2006.
  6. 14th International Mechanical Engineering Conference, Esfahan University of Technology, Tehran, Iran, 2006.
  7. Asia Simulation Conference 2005/the Sixth International Conference on System Simulation and Scientific Computing, Beijing, China, 2005.
  8. 2nd International Conference on Applied Thermodynamics, Yildiz Teknik University, Istanbul, Turkey,
  9. 13th International Mechanical Engineering Conference, Esfahan University of Technology, Tehran, Iran, 2004.
  10. 12th International Mechanical Engineering Conference, Tarbiat Modares University, Tehran, Iran, 2004.
  11. Fourth International Conference of Earthquake Engineering and Seismology, Tehran, Iran, 2003.
  12. Tenth Annual Mechanical Engineering Conference, K.N.T. University, Tehran, Iran, 2002.
  13. Annual CAMP Technical Meeting, Center for Advanced Materials Processing, a NYSTAR Center for Advanced Technology, Saratoga Springs, NY, USA, 2001.
  14. Third International Conference in Mechanical Engineering, Science and Industry University, Tehran, Iran, 1998.
  15. International Conference on Collaborative and Networked Learning, Indira Gandhi National Open University, New Delhi, India, 1998.
  16. Second International Conference in Mechanical Engineering, Shiraz University, Shiraz, Iran, 1996.
  17.  International Conference on Automation, Robotics and Computer Vision, Singapore, 1994.
  18.  First Seminar on Exhaust-Pipe, Tehran, Iran, 1993.
 
 


 PhD Thesis Guidances:
  1. Numerical and Experimental Analysis of Elastic Response to Quasi-Static Impact in Panels Reinforced with Corrugated Composite Sheets of Various Sections, 2023.
  2. Development of Multi-Criteria Topology Optimization Methods with Lagrangian Description, 2023.
  3. Analytical, Numerical, and Experimental Investigation of Fracture Energy of Adhesive Joints under Impact Load from a Falling Weight, 2024.
  4. Analysis of Micro-Structured Energy Absorber Considering Initiation of Crushing, 2020.
  5. Optimal Robust Control of a Hydraulic Engine Mount of a Vehicle to Improve NVH Behavior, 2019.
  6. Energy Absorption Analysis of Structures with Circular Section and Elastic-Plastic Support under Axial Impact from Collision Using Soft Damage Criteria, 2019.
  7. Topology Optimization of Energy Absorber under Transverse Impact Load Using Modified HCA Algorithm, 2019.
  8. Energy Absorption Analysis of Circular Structures under Axial Impact from Collision with Tear Path Control, 2016. 
 


Masters Thesis Guidances:
 
  1. Modeling and Simulation of an Auto-Body Structure Considering Crashworthiness Assessment Approach Submitted to a Barrier for Energy Absorption Enhancement, 2010.
  2. Automotive Cabin Interior Noise Optimization with Response Surface Methodology Due to Vibration of Viscoelastic Coated Metal Panels, 2010.
  3. Dimensional optimization of multi-material filled tube for vehicle crash energy absorption using Genetic Algorithm, 2010.
  4. Semi-active vibration control of a driver seat mechanism using magneto rheological damper, 2009.
  5.  Automotive body panel optimization of metal-composite-metal for dent resistance using RSM, 2009.
  6. Analysis of Hypoid Gears of an Automotive Gearbox Misalignment with AE Technology, 2009.
  7. Optimum Design of Effective Parameters in Heat Sink Performance with RSM, 2009.
  8.  Design and Fabrication of a Hydrodynamic Boat and Analysis of Nearby Fluid with Fluent Simulation, 2009.
  9. Axial crush behavior analysis and parameter optimization of square-sectional vehicle crash box using artificial neural networks, 2009.
  10.  Failure prediction of advanced high strength steel in advanced crashworthniss B-pillar of vehicles, 2009.
  11.  Development of biomechanical human model and its vibration analysis for car passenger’s comfort, 2009.
  12.  Acoustic Analysis of Automotive Passenger Compartment Due to Engine Vibration, 2008.
  13. Designing front part of automotive's chassis by micro alloy steel plate for elastic behavior during front impact of car, 2008.
  14. Optimization of Chassis Frame of Vehicle in View of Weight and Stiffness, 2008.
  15. Modeling of clinch Joining with Finite elements for production of body in white, 2008.
  16. Viscoelastic damping simulation for vibration passive control of car's body floor, 2008.
  17. Failure analysis of motor piston ring due to mechanical and thermal load to improve design, 2008.
  18. Active preview control suspension system of a quarter-car model using Fuzzy logic, 2008.
  19. Robust wheel slip control in ABS brake with real-time estimation of slipping between tire and road, 2008.
  20. Comparison of metal and composite bumpers subjected to low velocity rigid mass impact, 2008.
  21. Analysis and improvement of automotive parts production process manufacturable by Hydroforming, 2008.
  22. Circular tubes optimization with RSM method to reduce injury of automotive occupant under the impact load, 2008.
  23. Optimization of Distance Between Car Equipped with ACC and Proceeding Vehicles at Highways, 2007.
  24. Fatigue Effects Optimization in a Vehicle Component in Fillet Weld Joints under Fluctuating Loads, 2007.
  25. Fatigue Weld Assessment under Multiaxial Load with Considering Weld Process and Its Application in Automotive, 2006.
  26. Force Analysis of Press and Die in Manufacturing of Automotive panels, 2006.
  27. Dent Resistance Improvement of Auto Body Panels Using Simulation with Finite Element Method, 2006.
  28. Vibration Reduction of Vehicle Chassis Through Engine Mounts Using Genetic Algorithm, 2005.
  29. Chassis Analysis of Road Buss through Uneven Surface Road, 2004.
 
 
  1. J. Marzbanrad, M. Hafezian, M. Mozaffarikhah, Heavy Trucks Technology and Troubleshooting, K.N. Toosi University of Technology Inc., 2019.
  2. B. Teimouri, J. Marzbanrad, Extrusion Application and Simulation, Arshadan  Inc., 2018.
  3. J. Marzbanrad, M. Afrousheh, S. Beigzadeh, Topology Optimization Foundations and Applications, Iran University of Science and Technology Inc., 2016.
  4. A. Keshavarzi, J. Marzbanrad, A Practical Guideline for Motorcycle Troubleshooting and Repair, Dibagaran Tehran Inc, 2016.
  5. J. Marzbanrad, S. Rahimnezhad, Motorcycle, Fundamentals and Safety, Shahid Rajaee Teacher Training University, 2016.
  6. J. Marzbanrad, and Amrollahi, Applied Learning ANSYS, Dibagaran Tehran Inc, 2013.
  7. J. Marzbanrad, and S.E. Taghavi, M. AlahYariBeig, Learning ABAQUS, Islamic Azad University, Dezful Branch, 2012.
  8. J. Marzbanrad, and M. Pahlavani, Learning CATIA for Design and Modelling, Dibagaran Tehran Inc, 2009.
  9. J. Marzbanrad and J. Gharloghi, Learning ANSYS, Dibagarane Tehran Inc, 2009.
  10. J. Marzbanrad, Self Training of Working Model 3D, Dibagarane Tehran Inc, 2006.
  11. Edited by: J. Marzbanrad, Preparation for Engineering Mathematics Exam, Sahel Andishe Tehran Inc, 2006.
 


 Manuscripts:
 

. S. Rahmati, J. Marzbanrad , H.R.Khalili, “Impact Resistance and Optimization of Metal-Composite-Metal Auto Body Panel to using of Response Surface Methodology (RSM)”, Majlesi Journal of Mechanical Engineering, Vol. 2/No.2, pp. 43-49, 2010.

  2. H. Khalili, J. Marzbanrad , B. Bahri, “Optimization and Experimental Assessment of Dent Resistance of Sandwich Auto-Body Panel with Drop Weight System To Vehicle Weight Reduction, 2nd National Conference in Mechanical Engineering, NCME2010, Islamic Azad University, Khomeini Shahr Branch, pp. 69-77, 2010.

  3. J. Marzbanrad , H. Khalili, B. Bahri, “Application of Multi Metal-Composite Auto Body Panel to Improvement of Pedestrian Safety and Reduction of Crash Casualties”, 2nd National Conference in Mechanical Engineering, NCME2010, Islamic Azad University, Khomeini Shahr Branch, pp. 78-85, 2010.

  4. J. Marzbanrad , A. Abdollahpour, “Crashworthiness Study of Axial Impact in Cylindrical Aluminum Tubes”, Journal of Mechanical Engineering, Vol. No. 61 , pp. 1-18, 2010 .

  5. J. Marzbanrad , Y. AmiriRad, A. Afkar, “Vibration Isolation of a GA Optimized Biomechanical Model of a Railway Passenger Using MR Damper Seat Suspension”, International Journal of Vehicle Structures & Systems (IJVSS), In press, 2010. 

  6. J. Marzbanrad , M. Mehdikhanlo, A. Saeedi Pour, “An Energy Absorption Comparison of Square, Circular and Elliptic Steel and Aluminum Tubes under Impact Loading”, Turkish Journal of Engineering and Environmental Sciences, In press, 2010.

  7. J. Marzbanrad and A. Afkar and Y. Amirirad, “A Biomechanical Seven DOF Model as a Seated Human Exposed to Vertical Vibration Using Genetic Algorithm”, International Advanced of Technology Congress (ATCi), PWTC, Malaysia, p. 133, 2009. 

  8. J. Marzbanrad, Y. Amirirad and A. Afkar, “Semi-Active Vibration Control of a Human Body Model with MR Damper in Seat Suspension Exposed to Speed Hump”, International Advanced of Technology Congress (ATCi), PWTC, Malaysia, p. 133, 2009.

  9. J. Marzbanrad and R. Majdi Nasab, “Improvement of Semi-Conductors Heat Transfer by Using Entropy Generation Rate Model”, International Advanced of Technology Congress (ATCi), PWTC, Malaysia., p. 154, 2009.

  10. J. Marzbanrad and M. Golkhah, “Modeling, Simulation and Analysis of a Hydrodynamic Fabricated Boat”, International Advanced of Technology Congress (ATCi), PWTC, Malaysia., p. 154, 2009.

  11. N. Tahan, J. Marzbanrad and M. Motaghi Pour, “Effects of Al-Si Molten Bath on Hot-Dip Aluminizing Steel”, International Advanced of Technology Congress (ATCi), PWTC, Malaysia., p. 154, 2009.

  12. J. MarzbanRad , Y. AmiriRad, A. Afkar, “Vibration Isolation of a GA Optimized Biomechanical Model of a Railway Passenger Using MR Damper Seat Suspension”, 2nd International Conference on Recent Advances in Railway Engineering (ICRARE-2009) Iran university of science and Technology – Tehran – I.R. Iran, pp. 94-101, 2009.

  13. J. MarzbanRad , H. Roozehgir, “Crush Behavior Estimation of Train Structural Mechanical Absorbers Using Neural Networks”, 2nd International Conference on Recent Advances in Railway Engineering (ICRARE-2009) Iran university of science and Technology – Tehran – I.R. Iran, pp. 264-270, 2009.

  14. J. MarzbanRad , G. Esmaeeli, “Study of Produced Noise due to Vibrational Effects of Wagon Motion on Irregular Rain and Its Reduction Methods ”, 2nd International Conference on Recent Advances in Railway Engineering (ICRARE-2009) Iran university of science and Technology – Tehran – I.R. Iran, pp. 387-392, 2009.

  15. J. MarzbanRad , H. Roozehgir, “Analysis and Improvement of Tubular Absorbers Collapse Behavior of Train Under Impact Loads ”, 2nd International Conference on Recent Advances in Raiway Engineering (ICRARE-2009) Iran university of science and Technology – Tehran – I.R. Iran, pp. 410-415, 2009.

  16. J. Marzbanrad, S. Noruzi, “Study of Advance High Strength Steels Behavior in Automotive Impact Loading”, Automotive Eng. Magazine, No. 7, pp. 4-10, 2009.

  17. J. Marzbanrad, H. Roozehgir, “Management Algorithm and Optimization of Crash Energy Absorption in Automotive Structure Design”, Automotive Eng. Magazine, No. 7, pp. 42-48, 2009.

  18. J. Marzbanrad, A. Asadollahpour, “Effect of Viscoelastic Material in Vibration Reduction of Steel Plate”, Automotive Eng. Magazine, No. 7, pp. 12-16, 2009.

  19. J. Marzbanrad, M. Damroodi, “Modern ABS: Base Model Systems”, Automotive Eng. Magazine, No. 6, pp. 48-53, 2009.

  20. J. Marzbanrad, G. Esmaeeli, “Analysis of Internal Element Effect and Viscoelastic Material in Acoustic Behavior of Automotive Cabin”,17th Annual (International) Conference on Mechanical Engineering-ISME2009, Tehran University, Vol. 1, p. 30, 2009.

  21. J. Marzbanrad and A. Afkar, “Ride Comfort Improvement of a Car Passenger through Optimized Suspension and Seat System”, 17th. Annual (International) Conference on Mechanical Engineering-ISME2009, Tehran University, Vol. 1, p. 85, 2009. 

  22. J. Marzbanrad, E. Taheripour and S. Mousavi Asl, “A Controller Design for Anti-Squat and Anti-Dive of a Vehicle Full-Car Model”, 17th. Annual (International) Conference on Mechanical Engineering-ISME2009, Tehran University, Vol. 1, p. 155, 2009.

  23. J. Marzbanrad , M. Ghods, "FE Modeling of Clinching Process to Investigate the Effective Parameters in Joint Strength", Automotive Eng. Magazine, Vol. 1, No. 5, pp. 20-26, 2009.

  24. J. Marzbanrad , G. Esmaili, "Acoustic Behavior Comparison of Hotchback and Notchback Automotives Subjected to Low Frequencies", Automotive Eng. Magazine, Vol. 1, No. 5, pp. 46-48, 2009.

  25. J. Marzbanrad , M. Alijanpoor and M.S. Kiasat, "Design and Analysis of an Automotive Bumper Beam in Low-Speed Frontal Crashes", International Journal of Thin-Walled Structures, in press, 2009. 

  26. J. Marzbanrad , A. Abdollahpoor and B. Mashadi, "Effects of Triggering of Circular Aluminum Tubes on Crashworthiness", International Journal of Crashworthiness, Vol. 14, No. 6, pp. 591-599, 2009. 

  27. J. Marzbanrad , A. Jamali, "Design of Anfis Networks Using Hybrid Genetic and SVD Methods for Modelling and Prediction of Rubber Engine Mount Stiffness", International Journal of Automotive Technology, Vol. 10, No. 2, pp. 167-174, 2009.

  28. M. Ghods, J. Marzbanrad, H. Suragi, “Modeling of Clinch Joint with Finite Element Method”, 9th Manufacturing Engineering Conference, Birjand University, Iran, 2008.

  29. M. Ghods, J. Marzbanrad, H. Suragi, “Effective Parameters in Tensile Strength of two Step Axial Symmetric Clinch Joint”, 9th Manufacturing Engineering Conference, Birjand University, Iran, 2008.

  30. J. Marzbanrad , G. Esmaili, "Acoustic Analysis of a Complete Coupled of Structure and Fluid in Passenger Cabin Under Dynamical Load and Investigation of Viscoelastic Material Effectiveness in Noise Reduction", 8th Int. Conference in Aero Space of Iran, IAS2009, Malek Ashtar University of Technology, p. 189, 2009.

  31. J. Marzbanrad , M.J. Peyman, M. Ghare Baghi, "Analysis of Automotive Parts Manufacturing with Hydroforming and Investigation of Solid Lubrication Effect Using FEM", Iran Ghalebsazan Society Magazine, No. 50, pp. 7-10, 2009.

  32. M. Hodaei, J. Marzbanrad, P. Poozesh, "Measurement of Noise Emission by Tyre of Passenger's Car", 3rd Int. Conf. on Modelling, simulation and Applied Optimization, Sharjah, U.A.E., 2009.

  33. J. Marzbanrad , A. Najibi, "Contour Integral Evaluation: Two-Dimensional Case", 3rd Int. Conf. on Modelling, simulation and Applied Optimization, Sharjah, U.A.E., 2009.

  34. J. Marzbanrad , A. Kamyab, "Investigation of Crashworthiness of C-Section S-Rail Jeep Chassis", 3rd Int. Conf. on Modelling, simulation and Applied Optimization, Sharjah, U.A.E., 2009.

  35. J. Marzbanrad , M.S. Kiasat and M. Alijanpour, "A Comparison of Composite and Aluminum Bumper Beam of Automotives in Low-Speed Collision", The 1st Int. Conf. on Composites: Characterization, Fabrication and Application (CCFA-1), p. 90, 2008.

  36. J. Marzbanrad , A. Afkar, "Vertical Vibration Analysis Applied to Human Body with Seven DOF Biomechanical Modeling Through Simultaneous Multi-Objective Optimization Using GA”, 6th Iranian Annual Mechanical Engineering, Amir Kabir University of Technology, p. 295, 2008.

  37. J. Marzbanrad , M. Damroodi, “Automotive Stability Improvement in µ-split Road with ABS Sliding Mode Controller”, 6th Iranian Annual Mechanical Engineering, Amir Kabir University of Technology, p. 176, 2008.

  38. J. Marzbanrad , A. Yadollahi, “Intensification Effects of Tire on Road Noise to Vehicle”, National Mechanical Engineering Conference, Islamic Azad University, Khomaini Shahr, NCME2008, p. 175, 2008.

  39. J. Marzbanrad , A. Afkar, “Multi-Objective Optimization with GA Including Human Body, Seat and Suspension Modeling”, National Mechanical Engineering Conference, Islamic Azad University, Khomaini Shahr, NCME2008, p. 172, 2008.

  40. J. Marzbanrad , P. Poozesh, “Fuzzy Control Design for Ride Comfort and Steerability Improvement in Off-Road Vehicles”, ”, National Mechanical Engineering Conference, Islamic Azad University, Khomaini Shahr, NCME2008, p. 171, 2008.

  41. H. Moayeri, J. Marzbanrad, “Statically and Dynamically Analysis of Engine Piston Ring”, National Mechanical Engineering Conference, Islamic Azad University, Khomaini Shahr, NCME2008, p. 172, 2008

  42. J. Marzbanrad , M. Alijanpour, M.S. Kiasat, “Design Improvement of Automotive Frontal Composite Bumper in Low-Speed Crash with FEM”, Mechanical Engineering Magazine, 17th year, No. 59, 2008.

  43. J. Marzbanrad and G. Ahmadi, "Hybrid Preview Control of Structures Under Earthquake Exitations", Asian Journal of Civil Engineering (Building and Housing), Vol. 10, No. 1, pp. 57-78, 2009.

  44. J. Marzbanrad and P. Poozesh, "Introduction of Global Positioning System (GPS) and Its Application", Scientific and Specialized Quarterly Rahvar, Vol. 5, No. 2, pp. 96-109, 2008.

  45. J. Marzbanrad , S. Baghshahi, M. Carbasi and M. Pahlevani, "Automotive Modern Glasses with Low-emission, Self-Cleaning and Safety Property", First Conference on Innovation in Automotive Industry, Research Center and Automotive Eng. Dept., Iran University of Science and Technology, p. 2, 2008.

  46. J. Marzbanrad , H.R. Khalili, "Application of Nanotechnology in Future Automotive Generation", First Conference on Innovation in Automotive Industry, Research Center and Automotive Eng. Dept., Iran University of Science and Technology, p. 32, 2008.

  47. J. Marzbanrad , A. Afkar, "Presenting a Method for Model Evaluation to Assess the Passenger Ride Comfort in Vibration Situation", First Conference on Innovation in Automotive Industry, Research Center and Automotive Eng. Dept., Iran University of Science and Technology, p. 49, 2008.

  48. M.J. Peyman and J. Marzbanrad, “Finite Element Simulation and Experiment in Tube Hydroforming of Automotive Rear Housing”, World Automotive Congress, F2008-03-073, Fisita, Spain, 2008.

  49. J. Marzbanrad and A. Abdollahpour, "Thin-Walled Structures Optimization as Crash Energy Absorber Using DOE and RSM", The 20th Int. Conf. EURO Mini Conference "Continuous Optimization and Knowledge-Based Technologies", EurOPT'2008, Neringa, Lithuania, pp. 285-290, 2008.

  50. J. Marzbanrad and M.J. Peyman, “Sheet Hydroforming of Automotive B-Pillar and Coefficient of Friction Effects Analysis”, 6th Industrial Simulation Conference, ISC’2008, Eurosis, Lyon, France, pp. 111-116, 2008. 

  51. J. Marzbanrad and A. Abdollahpour, "Energy Absorption in Vehicle Crashes", Mechanical Engineering Magazine, No. 58, pp. 11-20, 2008.

  52. J. Marzbanrad and M.J. Peyman, “Aluminum T-Shape Finite Element Analysis Usable in Automotives Made by Hydroforming Tube”, 16th International Conference on Mechanical Engineering, ISME2008, Shahid Bahonar University of Kerman, Kerman, Iran, Vol. 1, p. 193, 2008.

  53. J. Marzbanrad and M.J. Peyman, “Aluminum T-Shape Finite Element Analysis Usable in Automotives Made by Hydroforming Tube”, 16th International Conference on Mechanical Engineering, ISME2008, Shahid Bahonar University of Kerman, Kerman, Iran, Vol. 1, p. 193, 2008.

  54. J. Marzbanrad and A. Najibi, “Calculation and Analysis and Numerical Improvement of Torsional Stiffness and Natural Frequencies of Automotive Chassis”, 16th International Conference on Mechanical Engineering, ISME2008, Shahid Bahonar University of Kerman, Kerman, Iran, Vol. 2, p. 1463, 2008.

  55. J. Marzbanrad and P. Poozesh , “Sliding Control in ABS Using Gain-Scheduling”, 16th International Conference on Mechanical Engineering, ISME2008, Shahid Bahonar University of Kerman, Kerman, Iran, Vol. 2, p. 1103, 2008.

  56. J. Marzbanrad , “Thickness and Material Yield Strength Effects of Thin Sheets on Dent Resistance”, WSEAS Transactions on Applied and Theoretical Mechanics, Issue 6, Vol. 2, pp. 127-131, 2007.

  57. J. Marzbanrad and I. Hadipour, “Fatigue Strength in Connectors with Fillet Weld”, Mechanical Engineering Magazine, No. 56, pp. 13-22, 2008.

  58. J. Marzbanrad and P. Poozesh, “Development of a Fuzzy Logic Controller for an Active Suspension of an Off-Road Vehicle Depending on Terrain”, 9th Int. Conference on Mechanical Design and Production (MDP-9), Cairo, Egypt, pp. 1431-1441, 2008.

  59. J. Marzbanrad and A. Najibi, “Seat Belt Analysis in Crash Situation Equipped with a Simple Dummy”, 9th Int. Conference on Mechanical Design and Production (MDP-9), Cairo, Egypt, pp. 226-234, 2008.

  60. J. Marzbanrad and M. Damroodi, “Robust Slip Controller for an Anti-Lock Brake System”, 9th Int. Conference on Mechanical Design and Production (MDP-9), Cairo, Egypt, pp. 1417-1430, 2008. 

  61. J. Marzbanrad and J. Baqersad, “A Survey on Weld-Bonded Joints”, 9th Int. Conference on Mechanical Design and Production (MDP-9), Cairo, Egypt, pp. 700-710, 2008.

  62. M.J. Peyman and J. Marzbanrad, “Simulation and Analysis of Rear Axle Housing Tube Hydroforming", Iran Ghalebsazan Society Magazine, No. 47, pp. 16-19, 2008.

  63. M.J. Peyman and J. Marzbanrad, “hydroforming of Automotive Structural Parts with Rectangular Section”, Iran Ghalebsazan Society Magazine, No. 46, pp. 13-16, 2008.

  64. I. Hadipour and J. Marzbanrad, “Stabilizer Fillet Weld Strength under Multiaxial Loading (Effect of Force, Size and Residual Stress)”, WASET.ORG, International Journal of Electrical, Computer, and Systems Engineering, Vol. 1, No. 4, 2007, pp. 234-241.

  65. J. Marzbanrad , M. Seyedi and H. Salehi Marijarani, “Chaotic Motion and its Control for a non-Planar non-Linear Cantiliver Beam with Parametric Excitation”, Majlesi Journal of Mechanical Engineering, Vol. 1, No. 1, 2007, pp. 17-26.

  66. J. Marzbanrad and P. Poozesh, “Ride Comfort Improvement with Fuzzy Controller”, 2nd Iranian Congress of Mechanical Engineering, Islamic Azad University, Shahr-e-Rey Branch, p. 60, Abstract Proceeding, 2007.

  67. J. Marzbanrad and M. Damroodi, “Control of Slip Ratio of ABS with Sliding Mode Conrtol”, 2nd Iranian Congress of Mechanical Engineering, Islamic Azad University, Shahr-e-Rey Branch, p. 61, Abstract Proceeding, 2007.

  68. R. Ghelichi, H.R. Jahed, J. Marzbanrad and S. Bagheri Fard, “Effect of Diesel to CNG Bus on Structure Dynamical Behavior”, 2nd Iranian Congress of Mechanical Engineering, Islamic Azad University, Shahr-e-Rey Branch, p. 83, Abstract Proceeding, 2007.

  69. I. Hadipour and J. Marzbanrad, “Stabilizer Fillet Weld Strength under Static and Fatigue Multiaxial Loading by Dividing Weld into Infinite Parts”, Conference on Application and Design in Mechanical Engineering, CADME07, Kangar, Perlis, Malaysia, Paper No. 106, 2007.

  70. J. Marzbanrad , A. Sharifzadegan and A. Kahrobaeian, “Thermodynamic Optimization of GSHPS Heat Exchangers”, Int. Journal of Thermodynamics, Vol. 10 (No. 3), pp. 107-112, 2007.

  71. I. Hadipour and J. Marzbanrad, “Stabilizer Fillet Weld Strength under Multiaxial Loading (Effect of Force, Size and Residual Stress)”, World Academy of Science and Engineering and Technology (WASET), Berlin, Germany, Vol. 23, pp. 159-166, 2007.

  72. J. Marzbanrad and I. Hadipour, “Fillet Weld Strength Under Static and Fatigue Multiaxila Loading”, 2007 International Conference on Engineering and Mathematics, Bilbao, Spain, pp. 339-346, 2007.

  73. J. Marzbanrad and M. Bateni, “Fatigue Life Estimation of Twist Beam for Rear Axle of Automotive Suspension System”, 2007 International Conference on Engineering and Mathematics, Bilbao, Spain, pp. 325-330, 2007.

  74. B. Mashadi, N. Ebrahimi, J. Marzbanrad, “Effect of Front-Wheel Drive or Rear-Wheel Drive on the Limit Handling Behaviour of Passenger Vehicles”, J. Automobile Engineering, JAUTO380, IMechE 2007, Vol. 221, Part D, pp. 393-403, 2007.

  75. J. Marzbanrd , A. Vaghef, "Vacuum and Its Relation to Air conditioning Service System", Magazine of Mechanical Engineering, Year 15, No. 51, pp. 62-66, 2006.

  76. J. Marzbanrad, M.H. Shojaeefard and M. Jafari, “Preferring Identification and Standards of Road Intelligent Transportation Systems”, Journal of Standard and Research, No. 3, pp. 42-87, 2006.

  77. J. Marzbanrad , M. Faizabadi, “A Study on Effect of Important Parameters in Press Force for Deep Drawing Operation”, The 1st Conference of Metal Forming of the Iranian Society of Mechanical Engineers, Sapco, Tehran, 2006.

  78. J. Marzbanrad , A. Abvabi, “Ergonomics in Automotive and Driver Parameter Measurement Methods”, 1st Congress on Mechanical Engineering (RCME 2006), Islamic Azad University, Majlesi Branch, Esfahan, Iran, 2006.

  79. J. Marzbanrad , J. Baghersad, “A Study on Usage of Roof Multi-Operational Panels”,1st Congress on Mechanical Engineering (RCME 2006), Islamic Azad University, Majlesi Branch, Esfahan, Iran, 2006.

  80. J. Marzbanrad , A. Shane Sazanzadeh, M. Ahangari, “Gearbox Optimization of Miler Benz Lorry 1292-zf”, 1st Congress on Mechanical Engineering (RCME 2006), Islamic Azad University, Majlesi Branch, Esfahan, Iran, 2006.

  81. J. Marzbanrad , M. Seyedi, H. Salehi, “Chaotic Movement Control for Nonlinear Nonplanar Cantilever Beam with Parametrical Excitation”,1st Congress on Mechanical Engineering (RCME 2006), Islamic Azad University, Majlesi Branch, Esfahan, Iran, 2006.

  82. J. Marzbanrad , J. Zareii, “Heat Transfer Effects in the Internal Combustion Engine Pistons and Suitable Alloy Selection”,1st Congress on Mechanical Engineering (RCME 2006), Islamic Azad University, Majlesi Branch, Esfahan, Iran, 2006.

  83. J. Marzbanrad, S. Mokhtari, “International Preferable Standards of Rail Intelligent Transportation Systems”, 8th Conference of Iranian Association of Rail Transport Engineering, Tehran, 2006.

  84. J. Marzbanrad , M. Falahati, E. Saboohi, “Modal Analysis and Tortional Stiffness Calculation of Carvan”, Int. Conference on Advances in Mechanical Engineering (AME 2006), Module-1, pp. 15-21, Baba Banda Singh Bahadur Eng. College, Fatehgarh Sahib, Punjab, India, 2006.

  85. J. Marzbanrad , S. Pirmohammad, “Transfer Function Calculations with Application in a Quarter-Car Suspension System”, Int. Conference on Advances in Mechanical Engineering (AME 2006), Module-1, pp. 22-29, Baba Banda Singh Bahadur Eng. College, Fatehgarh Sahib, Punjab, India, 2006.

  86. J. Marzbanrad , M. Aghamirzaie, “Material Yield Strength Effect on Dent Resistance of Thin Sheet”, Int. Conference on Advances in Mechanical Engineering (AME 2006), Module-1, pp. 11-14, Baba Banda Singh Bahadur Eng. College, Fatehgarh Sahib, Punjab, India, 2006.

  87. J. Marzbanrad , A. Sharifzadegan, A. Kahrobaeian, “Dimensional Optimization of the GSHPS Heat Exchangers by Considering the Ground Temperature Variations”, Int. Conference on Advances in Mechanical Engineering (AME 2006), Module-2, pp. 14-19, Baba Banda Singh Bahadur Eng. College, Fatehgarh Sahib, Punjab, India, 2006.

  88. J. Marzbanrad , F. Khaleghian, “Analysis of Lateral Vibration of Cables Under External Moving Load Effect”, Int. Conference on Advances in Mechanical Engineering (AME 2006), Module 1, pp. 30-38, Baba Banda Singh Bahadur Eng. College, Fatehgarh Sahib, Punjab, India, 2006.

  89. J. Marzbanrad , M. Aghamirzaie, “Thickness Effect of Thin Sheet on Dent Resistance”, The 10th World Automotive Congress, F2006M249, p. 296, Fisita, Yokohama, Japan, 2006.

  90. J. Marzbanrad , A. Kamyab, B. Mashadi, “Effect of Strain Rate, Module of Elasticity and Yield Point on Energy Absorption Behaviour of Thin Cylindrical Shells”, The 10th World Automotive Congress, F2006M208, p. 274, Fisita, Yokohama, Japan, 2006.

  91. J. Marzbanrad , A. Keshavarzi and N. A. Yar Ahmadi, “Path Control of a Submarine without Passenger”, The 8th Conference on Marine Industries, Bushehr, Iran, 2006.

  92. J. Marzbanrad , M. Aghamirzaee and S. Shah Baik, “Dent Prediction of Steel Thin Sheets in Cyclic Increasing Load”, 14th International Mechanical Engineering Conference, Esfahan University of Technology, Esfahan, Iran, 2006.

  93. J. Marzbanrad , B. Mashadi and S. Sharifi, “The Effects of Brake Parts Parameter on Dynamical Behavior of a Sedan Automotive”, 14th International Mechanical Engineering Conference, Esfahan University of Technology, Esfahan, Iran, 2006.

  94. J. Marzbanrad , M. Falahati and E. Saboohi, “Making Less Weight of Automotive Chassis of Caravan in Attention of Vibration Characteristic and its Strength”, 14th International Mechanical Engineering Conference, Esfahan University of Technology, Esfahan, Iran, 2006.

  95. B. Mashadi, J. Marzbanrad and A. Saboote, “The Effect of Desired Slip Range of Tire on ABS Performance”, 14th International Mechanical Engineering Conference, Esfahan University of Technology, Esfahan, Iran, 2006.

  96. J. Marzbanrad, K. Hashemi, H. Kalantari and A. Keshavarzi, “Role of Intelligent Systems and New Technologies in Optimization of Fuel Consumption of Vehicles”, Symposium of Air pollution and its Effects in Human Health”, Tehran, Iran, 2006.

  97. J. Marzbanrad , F. Mohammadi and A. Mohammad Panah, “Vibration Analysis of Three Points inside the Vehicle Due to Engine Shaking Including Sub-Frame”, The Asia Simulation Conference 2005/the Sixth International Conference on System Simulation and Scientific Computing, Vol. 1, pp. 248-252, Beijing, China, 2005.

  98. J. Marzbanrad and Ehsan Taheripour, “ Object-Oriented Programming for Anti-Lock Brake System in Different Pavements”, The Asia Simulation Conference 2005/the Sixth International Conference on System Simulation and Scientific Computing, Vol. 1, pp. 600-604, Beijing, China, 2005.

  99. J. Marzbanrad, A. Sharifzadegan and A. Kahrobaeian, “Thermodynamically Optimization of the GSHPS Heat Exchangers”, 2nd Int. Conf. on Applied Thermodynamics, ATC’05, pp. 169-174, Yildiz Technical University, Istanbul , Turkey, 2005.

  100. N. Nariman-Zadeh, J. Marzbanrad and A. Jamali, “ANFIS Network Design Using Hybrid Genetic and SVD Methods for Modeling of Rubber Engine Mount Stiffness”, 13th International Mechanical Engineering Conference, Esfahan University of Technology, Esfahan, Iran, 2005.

  101. J. Marzbanrad and E. Taheripour, “Application of Java in Anti-Lock Braking System”, 13th International Mechanical Engineering Conference, Esfahan University of Technology, Esfahan, Iran, 2005.

  102. A. Kahrobaeian, J. Marzbanrad and A. Sharifzadegan, “Thermodynamically Design of the GSHPS Heat Exchangers”, 13th International Mechanical Engineering Conference, Esfahan University of Technology, Esfahan, Iran, 2005.

  103. A. Kamyab, P. Hossaini and J. Marzbanrad, “Energy Absorption of Thin
Cylindrical Shells After Deformation and Before Spring Back”, Magazine of Nameh Mechanic Sharif, No. 26, pp. 70-72, 2005.

  104. J. Marzbanrad, G. Ahmadi and R. Jha, “Optimal Preview Active Control of Structures During Earthquakes”, Journal of Engineering Structures, Vol. 26, pp. 1463-1471, 2004.

  105. N. Nariman-Zadeh, J. Marzbanrad, A. Jamali, “Stiffness Modelling of Rubber Engine Mounts by Polynomial Neural Networks and Genetic Algorithm”, Eur opean Simulation & Modelling 2004-Unesco (ESM’2004), Paris, France , pp. 181-187, 2004.

  106. J. Marzbanrad and A. Masoomi Nezhad, “Weigh-in-Motion Systems”, Automotive Scientific Magazine, No. 13, 2004.

  107. J. Marzbanrad, J. Mohammadi Majd and Y. Mostatab, “A Design for Hydraulic Steering of Pride GTX Automotive”, Automotive Scientific Magazine, No. 12, 2003.

  108. J. Marzbanrad , Y. Hojjat, H. Zohoor and G. Ahmadi, “Stochastic Optimal Preview Control of a Vehicle Suspension”, Journal of Sound and Vibration, No. 275, pp. 973-990, 2004. 

  109. J. Marzbanrad and M. Moghaddami, “Skyhook Semi-Active Control Design for a Full-Car Model”, Journal of Society of Automotive Engineers of Japan, JSAE Paper Number: 20044868, pp. 299-307, 2004.

  110. J. Marzbanrad and M. Moghaddami, “Skyhook Semi-Active Control Design for a Full-Car Model”, AVEC’04, 7th International Symposium on Advanced Vehicle Control, Arnhem, Netherlands, 2004.

  111. J. Marzbanrad and A. Emadi, “A Calculation of Torsional Stiffness and Modal Analysis for Renault’s Hood Vehicle”, 12th International Mech. Eng. Conference, Tarbiat Modarres University, Iran, 2004.

  112. M. Mashadi Ebrahim, J. Marzbanrad, R. Shah Siah and A. Saeedi, “Improvement in Volumetric Spirometer with new Mechanism”, 12th International Mech. Eng. Conference, Tarbiat Modarres University, Iran, 2004.

  113. J. Marzbanrad, A. Mahammad Panah and F. Mohammadi, “Vibration Reduction of Automotive Body Due to Engine Shaking Using Sub-Frame”, 12th International Mech. Eng. Conference, Tarbiat Modarres University, Iran, 2004.

  114. J. Marzbanrad and M. Askarikia, “Effect of Small Deflections in Increasing Critical Load in Global and Local Buckling on Thin Plates”, Automotive Scientific Magazine, No. 11, 2003.

  115. J. Marzbanrad and A. Allahmoradi, “Viscoelastic Dampers Applications for Noise Reduction in Automotives”, Automotive Scientific Magazine, No. 10, 2003.

  116. J. Marzbanrad and F. Mohammadi, “Lane Detection Using Image Processing for Intelligent Vehicles”, Automotive Scientific Magazine, No. 9, 2003.

  117. J. Marzbanrad , A. Saeedi and M. Mashadi Ebrahim, “A Design for Spirometer”, Magazine of the Iranian Society of Mechanical Engineering, Vol. 12, No. 31, pp. 53-56, 2003

  118. J. Marzbanrad , G. Ahmadi and Ratneshwar Jha, "Vibration Control of Structures During Earthquakes with an Optimal Preview Active Control Strategy", 6th International Conference on Civil Engineering, Isfahan, Iran, 2003.

  119. J. Marzbanrad and G. Ahmadi, “Preview Control of Base-Isolated Structures Subject to Earthquake Excitations”, Fourth International Conference of Earthquake Engineering and Seismology, Tehran, Iran, 2003.

  120. J. Marzbanrad , Y. Hojjat, H. Zohoor and S.K. Nikravesh, “Optimal Preview Control Design of an Active Suspension Based on a Full Car Model”, Journal of Scientia Iranica, Vol. 10, No. 1, pp. 23-36, 2003.

  121. J. Marzbanrad , G. Ahmadi, Y. Hojjat and H. Zohoor, “Optimal Active Control of a Vehicle Suspension System Including Time Delay and Preview for Rough Roads”, Journal of Vibration and Control, Vol. 8, pp. 967-991, 2002

  122. J. Marzbanrad , “Stochastic Optimal Preview Control of a Vehicle Suspension-Full Car Model”, Proceeding of the 10th Annual Mechanical Engineering Conference, K.N.T. University, pp. 87-94, Tehran, Iran, 2002.

  123. J. Marzbanrad , Y. Hojjat, H. Zohoor and G. Ahmadi, “Stochastic Optimal Preview Control of a Vehicle Suspension-Half Car Model”, Proceeding of 5th International Mech. Eng. Conference, Gilan University, pp. 542-552, Rasht, Iran, 2001.

  124. H. Zohoor, J. Marzbanrad, and F.Z. Tahmasebi, “Kinematic Analysis of Spatial Linkages Using Basic Mechanisms”, The Fifth Biennial World Conference on Integrated Design and Process Technology (IDPT), North Dallas/Addison, Texas, USA, 2000.

  125. J. Marzbanrad and M. Nematollahzadeh, “Semi-Active Control of a Vibrating Isolation Table Using Fuzzy Logic”, Proceeding of the Sixth Annual Mech. Eng. Conf. and Third Inter. Mech. Eng. Conf. of ISME, Iran University of Science and Technology, Vol.3, pp. 1355-1362, Tehran, Iran, 1998.

  126. J. Marzbanrad , “Industry-University Networks for the Promotion of Products' Quality”, International Conference on Collaborative Networked Learning, Indira Gandhi National Open University (IGNOU), pp. 180-182, New Delhi, India, 1998.

  127. J. Marzbanrad , “An Active Suspension System for Different Road Conditions Using Fuzzy Logic”, Proceeding of the Fifth Al-Azhar Engineering International Conference (AEIC), Cairo, Egypt, 1997.

  128. K. Abdi and J. Marzbanrad, “A Study on the Transfer Function of Steam Turbine Power Plant Systems and the Methods of Parameters Estimation”, Proceeding of the Fourth Annual Mech. Eng. Conf. and Second Inter. Mech. Eng. Conf. of ISME, Shiraz University, Vol.1, pp. 299-311, Shiraz, Iran, 1996.

  129. J. Marzbanrad , K. Abdi, and H. Zohoor, “Dynamical Parameters of a Turbine Shaft, Journal of Electricity”, No. 15, pp. 66-76, Iran, 1995.

  130. J. Marzbanrad and H. Zohoor, “Kinematical Analysis of Spatial Linkages Using Five Basic Mechanisms”, Proceeding of the Third International Conference on Automation, Robotics and Computer Vision (ICARCV) Vol. 2, pp. 736-740, Singapore, 1994.

  131. J. Marzbanrad , “Environment and Pollution”, First Research Conference In Exhaust, Tehran, Iran, 1993.

  132. J. Marzbanrad , “Noise in the Vehicle Systems”, Magazine of Industry and Safety, No. 23, pp. 10-11, Iran, 1992.


 
 

  Confrences
 
  
View: 112 Time(s)   |   Print: 6 Time(s)   |   Email: 0 Time(s)   |   0 Comment(s)
خبرهای اخیر
اطلاعیه مهلت تصویب پایان نامه برای دانشجویان ارشد ورودی ۱۴۰۲ ...
زمانبندی جلسات درس سمینار (تکنولوژی خودرو) و روش تحقیق - ورودی ۱۴۰۳ ...
جلسه معارفه دانشجویان ورودی جدید مقطع ارشد و دکتری سال ۱۴۰۳ ...
اطلاعیه جدید دوره ایمنی و بهداشت ورودی ۱۴۰۳
دانشجویان ورودی ۱۴۰۳ در سامانه ITS ثبت نام نمایند
برنامه کلاس‌های ترم ۴۰۳۱